DavidL
06-26-2016, 05:51 PM
I decided to go a different route all together. Everthing is brand new and has only been mocked up. I will take more pictures if needed just request. These prices don't included shipping. I will disassemble the car as the parts sell.
American Torq Thrust II's $1,200
Rears 17x9.5 5.5" back spacing 5/4.75 bolt pattern
275/40R17 BFG Comp II tires
Fronts 17x8 5" back spacing 5/4.75 bolt pattern
245/40R17 BFG Comp II tires
Wilwood 12" Forged Dynalite 4 Piston 2 Piece Kit Features: DRILLED / SLOTTED ROTORS Part # 140-7675D Front SOLD
Wilwood Rear Brakes drilled and slotted with parking brake Part # 140-7140 SOLD
Global West Subframe connectors SOLD
Global west lower a arms CTA-79H all delum bushings $500
Global a arms CTA-79A delum bushings upper $400
Coil Overs front S-501 small block application QA1 Single adjustable $400
Rear Leaf Springs monoleaf L-2R Reverse Eye 1.5" drop with shakle and delum bushing set SOLD
Currie 9" housing with 31 spline axles SOLD
Delphi power steering box 21-1 ST-42 $450
Pitman Arm $80
Idler Arm $80
GM Tubular tie rod sleeves $30
outer tie rod ends $50
inner tie rod ends $40
Standard spindles Pair $180
Edelbrock 6755 retro fit header, engine mounts, and exhaust system for LS setup. All brand new only mocked up from headers all the way to the tail pipes. This kit has been discontinued. $1,000
LM7 5.3 crate engine never fired with moroso F-Body oil pan and edelbrock valley cover SOLD
Billet Specialties Steering Wheel $280 without adaptor
American Torq Thrust II's $1,200
Rears 17x9.5 5.5" back spacing 5/4.75 bolt pattern
275/40R17 BFG Comp II tires
Fronts 17x8 5" back spacing 5/4.75 bolt pattern
245/40R17 BFG Comp II tires
Wilwood 12" Forged Dynalite 4 Piston 2 Piece Kit Features: DRILLED / SLOTTED ROTORS Part # 140-7675D Front SOLD
Wilwood Rear Brakes drilled and slotted with parking brake Part # 140-7140 SOLD
Global West Subframe connectors SOLD
Global west lower a arms CTA-79H all delum bushings $500
Global a arms CTA-79A delum bushings upper $400
Coil Overs front S-501 small block application QA1 Single adjustable $400
Rear Leaf Springs monoleaf L-2R Reverse Eye 1.5" drop with shakle and delum bushing set SOLD
Currie 9" housing with 31 spline axles SOLD
Delphi power steering box 21-1 ST-42 $450
Pitman Arm $80
Idler Arm $80
GM Tubular tie rod sleeves $30
outer tie rod ends $50
inner tie rod ends $40
Standard spindles Pair $180
Edelbrock 6755 retro fit header, engine mounts, and exhaust system for LS setup. All brand new only mocked up from headers all the way to the tail pipes. This kit has been discontinued. $1,000
LM7 5.3 crate engine never fired with moroso F-Body oil pan and edelbrock valley cover SOLD
Billet Specialties Steering Wheel $280 without adaptor