View Full Version : Fast ez-efi
Bygblok
05-21-2016, 11:23 AM
I've had this system on my 70 Camaro for about two years and maybe 6k miles. It was the complete master system and I used an in-tank pump on it so the pump that came with it has never been run at all. It will come with everything but fuel lines and an O2 sensor bung. Changing to a bigger direct port system so I need this out of my way. Currently still on the car and running. Asking $1200 plus shipping from Pensacola. It will likely be shipped in the original box from fast if I can get it all back in that box.
turner69camaro
05-21-2016, 03:24 PM
Are you up for any trades? I've got a wrecked 2013 ZL1. Engine, transmission and seats are gone. Lots of parts. Wheels, 14" ZL1 Brembo brakes. Text me at 606-584-4747 if interested.
Bygblok
05-21-2016, 04:43 PM
Pm returned. Really don't need any trades. Thanks.
camuchi
05-21-2016, 09:07 PM
Pm sent from L.A. (Lower Alabama)
Bygblok
05-22-2016, 05:33 AM
Pm sent from L.A. (Lower Alabama)
Returned
Bygblok
05-30-2016, 06:39 AM
Running behind this whole last week but will be pulling this off probably tonight or tomorrow. Drove the car Saturday night so the system works fine. I also found the original box for it so I'll try to ship it that way also. All pm's replied to. Thanks
F-Body International
05-30-2016, 11:21 AM
Is this the standard EZ EFI or EZ EFI 2.0? Big difference there without pictures.
Bygblok
05-30-2016, 02:07 PM
Standard, it was the master kit with the pump and regulator too. I won't be using any of that for the new setup.
bpmack16
05-31-2016, 07:05 AM
Is the kit off the car yet
Bygblok
05-31-2016, 11:25 AM
Is the kit off the car yet
I drove the car as-is this weekend(weather was great, couldn't help it) but will pull the kit off this evening with any luck and take pics along the way. I'll also make sure that the harnesses are all labeled/marked as to where they go in case any fading has occurred on the original labels.
Bygblok
05-31-2016, 08:00 PM
127799127800127801127802
Got it all taken off tonight and boxed up. Most of the labels were still good. All you need is fuel lines I think. The frame mount pump was never installed.
Anthony k
06-01-2016, 07:44 AM
Were the problems you had with it ever fixed? Resolved?
Bygblok
06-01-2016, 08:05 AM
Were the problems you had with it ever fixed? Resolved?
it worked out to be fairly reliable once I went to a full MSD ignition and reduced the EMI to where it was 3 or less on the handheld. I'm just going to a system that is more versatile now and I can use a timing controller with for a small dose of spray. Just trying to recoup some change at this point.
Bygblok
06-06-2016, 09:51 AM
pm's replied
Bygblok
06-12-2016, 07:32 PM
Two "commited" buyers later I still haven't gotten paid. Willing to play on the price some to make it go away. Got my new parts to put in so this is in my way. Thank, Bill
Bygblok
06-30-2016, 05:47 PM
And again. I feel like I'm selling on craigslist with some responses I get!
Tpichevy
07-02-2016, 10:08 PM
How big is the throttle body (cfm)? I just got a 70 cameo with a mild 350 5spd and thinking fuel injection would be fun!
Bygblok
07-03-2016, 06:52 AM
How big is the throttle body (cfm)? I just got a 70 cameo with a mild 350 5spd and thinking fuel injection would be fun!
if I remember right it's a 1000cfm throttle body. I had it on my mild 383 and it works pretty good once I got rid of a lot of the EMI by wrapping harnesses and using an MSD to fire it. The MSD HEI I had on it originally was pretty dirty as far as EMI goes(like any HEI from what I understand) so the magnetic pulse distributor and MSD digital 6 really helped it out a ton. Ironically enough this was also in my 70 Camaro.
csouth
07-03-2016, 04:59 PM
How big is the throttle body (cfm)? I just got a 70 cameo with a mild 350 5spd and thinking fuel injection would be fun!
You should ok, my friend is running one on his 572....
Bygblok
07-09-2016, 09:09 PM
I wasn't able to save the o2 sensor when I pulled it out. Messed the harness up on it so it'll need a new one. Dammit
URBANHOTROD
07-12-2016, 11:40 AM
Still available? Do you have a contact number I can call you about it?
Bygblok
07-30-2016, 07:46 PM
Waited around a few weeks for a guy "sending a money order" and never received a thing. Still here and I'd really like it to go away. I broke a wire in the o2 sensor when I pulled it so there's no o2 sensor with it now. All boxed up and ready to be shipped.
Bygblok
08-07-2016, 05:34 PM
Sorry for the delay returning pm's. Been out of town most of the last few weeks. Yes, still in my garage, packed in the original box from fast and ready to go. Hate to see it just sitting and I have nothing to use it on.
bpmack16
10-10-2016, 03:52 PM
Pm me if you still have it.
Bygblok
10-11-2016, 08:31 AM
Pm me if you still have it.
pm sent
Bygblok
11-01-2016, 06:24 AM
still here. Sure would like to make this go away so I can buy more parts for my Buick. Would swap for some suspension goodies for my 66 A-body Buick(sway bars, coil-overs, etc) Already have tubular arms for it. Also looking for a good 5.3/4L60 combo close to Pensacola(don't want to hit the salvage yards)
Bygblok
11-13-2016, 10:28 AM
More pm's responded to. I hate this thing sitting in the garage but I have nothing to use it on right now.
Bygblok
01-28-2017, 07:52 PM
Been a while but I'll bump this up again. I hate to see this going to waste.
camaro69x11
01-29-2017, 08:39 PM
Pm sent
Bygblok
04-12-2017, 06:38 PM
Forgot this was here. Started getting ready to move to our new house and this was still in the garage. $1200 obo shipped anywhere in the lower 48. Maybe I can get lucky and find someone with a 5.3/4L60 combo they'll swap me to put in the 66.........
Bygblok
04-18-2017, 08:32 AM
pm's all replied to. Somebody take this off my hands!
67cougnut
06-05-2017, 02:10 PM
I'm interested, I'm looking to go EFI.
You said this is the master kit, is the pump and the other items that make it a master KIT included? I did not see them in the picture.
I'm interested but I cannot justify Paying more than new for the kit. https://www.summitracing.com/parts/fst-30227-06kit/overview/
if you would like to work something out go ahead and shoot me a Pm.
Thanks!
Bygblok
06-05-2017, 06:16 PM
Yes, the pump is brand new because I used an in-tank setup. The only things that aren't included will be the lines and a bung for the o2 sensor. As far as the cost goes not sure how it's more than a new one at a grand for the whole thing. It's just sitting on a shelf in my garage right now. My Dart is almost stock original and my Buick is goes LSx so I have no use for it. Want to sell it to buy more parts!
F-Body International
06-05-2017, 06:44 PM
Can't believe this isn't gone yet. You've been very active with getting it sold too.
Bygblok
06-28-2017, 05:35 AM
Can't believe this isn't gone yet. You've been very active with getting it sold too.
I wish it was gone. It's like selling on craigslist on here most of the time. At least if I tell someone that I'll buy from them I follow through. This has been sold at least six times but not a single dollar ever made it to me. The box still sits on the shelf at my other house waiting for me to finish moving!
Powered by vBulletin®