Mr.Vengeance's Streetfighter Kit, Fender Flares, Chinspoiler and rear Spoiler FINALLY

[Mr.VENGEANCE]

First and foremost:

Thank you very much, Larry Callahan!


I know, I know.. Finally!.. Vengeance's Fender Flares are ready to be purchased.. just in time for the Bumblebee clones.. lol.
At least mine are quite tasteful in comparison..


It took a while to get these going mainly from how busy my business is(not car related) but I finally got the molds made and these are ready.
Most of the greybeards on here know I had my flares for about 8 years now but dammit here they are!


The Streetfighter Kit can be bought as a whole kit or in parts.

Fender Flare set
$1600 Carbon
$1200 Fiberglass

Front Chinspoiler $550

and rear Spoiler(not pictured as I havent mounted one yet)

Any part of the kit is offered in Carbon Fiber and Fiberglass.
I wish they could be cheaper for y'all but thats the price for making this in USA.

https://static1.pt-content.com/images/pt/2016/05/26856692012_bc201f89df_o-1.jpg

https://static1.pt-content.com/images/pt/2016/05/26951216915_259821eff7_o-1.jpg

This pic demonstrated just how far the rears come out from the body.. and I am running 14 inch wide in the rear.
https://static1.pt-content.com/images/pt/2016/05/26346581643_c22460f3cc_o-1.jpg
You can see how far they come out of the body.. 4 INCHES in the rear 3.5 INCHES in front.

https://static1.pt-content.com/images/pt/2016/05/26346581563_94b79fec85_o-1.jpg

https://static1.pt-content.com/images/pt/2016/05/26346581473_aeaa2b3985_o-1.jpg

The fit is very nice... The flares are not even bolted up completely!.. only 2 bolts finger tighted holding it up there and you can see how snug it is to the body!

Ignore the dirty hands, KFC fingerprints all over these.. lol!

https://static1.pt-content.com/images/pt/2016/05/26346581543_535ed0dda1_o-1.jpg

https://static1.pt-content.com/images/pt/2016/05/26951216325_2a8d6e38f3_o-1.jpg

The Streetfighter kit Chinspoiler.. in CF or FG

This is with comparison to a stock 67 68 Camaro spoiler..
It has about the same depth but justs out forward about 2 more inches than the regular one and is boxed in.

https://static1.pt-content.com/images/pt/2016/05/26346581433_4861974734_o-1.jpg
The stock spoiler has been smushed while on my shelf and looks wider but the Streetfighter chinspoiler is actually about 3 quarter inches wider on the ends to the stock piece..
I am pretty sure the spoiler will fit on an 69 Camaro also as it is the comfortable middle between the two spoilers widths.

https://static1.pt-content.com/images/pt/2016/05/26951216235_255f17d227_o-1.jpg

https://static1.pt-content.com/images/pt/2016/05/26346581333_797d4227c6_o-1.jpg

https://static1.pt-content.com/images/pt/2016/05/26856692012_bc201f89df_o-1.jpg

Ignore the first and last pic as I pshopped Vengeance's Wheels to sit where they are supposed to be on the edge of the flares.

I have to get a NEW set of wheels for her as I would never use the original wheel maker again.. Transformers tied my hands on running these wheels..


These are manufactured for me by the race team Jim Downing here in Atlanta so you know the quality is nice and no bullshesh.. USA made.. not perfect 100% show but very very nice.

Also If you have not done bodywork to your 67-68 Camaro or Firebird these will not be crispy flush to the body.. I mocked them up on Stormy(which havent bodyworked at all) and they fit rather well but to have the tight fitment like on Vengeance you need to have that already sorted.. please take this into account before purchase.

All holes will be drilled by you for mounting as all cars are different also know that you will have to cut your fenders behind the flares if you want to drop the car lower behind the fender flares for a more tucked look.

There is a level of commitment to run this look so be aware and responsible as I take no responsibility for the modifications you do to your car..




I know these are not for everyone taste but now the option is there if you want to run this look and run wider tire!

email me at:

[email protected]

Thank you guys very much!

[CKreations]

Bolt on flares look good on almost anything, nice work!

[NOT A TA]

They look great! Wish I could bring myself to cut up my 67. That piece you did on the wall and overhead door is awesome!

[RLJ676]

I've been dreaming of something like this for my 2nd gen! Any chance of that happening?

[Mr.VENGEANCE]

I've been dreaming of something like this for my 2nd gen! Any chance of that happening?



How funny you mention this.. I AM NOW WORKING ON A KIT!

Im excited for these too!

- - - Updated - - -


They look great! Wish I could bring myself to cut up my 67. That piece you did on the wall and overhead door is awesome!

Thank you, John!


Welp they get to see how MY shop looks inside and what I do for a living..

[RLJ676]

please pm me when ready!

How funny you mention this.. I AM NOW WORKING ON A KIT!

Im excited for these too!

- - - Updated - - -



Thank you, John!


Welp they get to see how MY shop looks inside and what I do for a living..

[broken1234]

How about bonding them on instead of bolting?

[Mr.VENGEANCE]

How about bonding them on instead of bolting?

Im sure they could be.. just whomever likes to go that way better know how to bond carbon fiber/fiberglass to metal..

[mc84_zz4]

Congrats on getting these to market, I hope they move fast, in more than one way.
Kudos! :cheers:

[Mr.VENGEANCE]

man Rod, I would love to see my kit on your car.. Ive been such a fan!

[TheJDMan]

I really like the Vengeance chin spoiler. I also assume the splitter you have installed on the car is not part of the chin spoiler. So is the $550 price listed above for the CF or FG version?

[ChevelleNV]

Its great seeing you finally got these manufactured, I saw you talking about this ages ago. Ill have to show my buddy Rick these....he has two 69's

[Mr.VENGEANCE]

Thank you to one of my first batch of sales of my Vengeance Flares kit.

gonna be sick things rolling around Nor Cal.

https://static1.pt-content.com/images/pt/2016/06/27811275076_624776b7a8_o-1.png

[minendrews68]

Dang dude, you've got that Camaro looking good! I like those flares. (now back to sanding)

[Mr.VENGEANCE]

ahahahah!... keep at it brother!

[Mrmagik]

Can't wait for mine to come in!

[Mr.VENGEANCE]

yours are finished!

im boxing em up now!

[Mr.VENGEANCE]

Mr Magik got his!

[grendel]

How's the second gen kit coming?

[Mr.VENGEANCE]

Slowly as I found out that my 70 Firebird fenders are quite different than a 70 Camaro!

frustrating... lol!


but the funny thing I found out is that my 67-68 kit kindof works on a 70-80 firebird!

lol!

[jlcustomz]

Glad to see you finally got someone to make your parts. Just goes to show how hard it can be to get an item into production. Damn good thing you're doing something on a car that will indefinitely remain a classic, rather than just coming to market with a part for a 2008' something or other replaced by the next model.
From what I've seen around here in Jacksonville, what remaining traditional fiberglass shops we still have aren't a good choice for car parts. One old shop I stopped & talked to about possibly making a mold off my 2016 camaro nose for g-body application said it would be over 2k to do a mold, would be 6 months to a year before he maybe could do it, & didn't care to do it anyways. Not very encouraging to say the least. I'd imagine you had similar results at places you checked into. So I guess a race team is a whole different work environment with a newer generation of people doing the work & would take more pride in making a quality car part. Good call.

While your stuff can be classified a not for everyone items, it would be hard for any car guy with a heartbeat not to get excited seeing a car on the streets with such items.

[Mr.VENGEANCE]

The rear wing in Carbon Fiber.
https://static1.pt-content.com/images/pt/2016/09/29430864886_3e8c0e16bc_b-1.jpg

[70Uglybird]

Subscribing for the second gen firebird kit!

[Mr.VENGEANCE]

https://static1.pt-content.com/images/pt/2016/09/20160901_171426-1.jpg

With my Chinspoiler and rear wing.

https://static1.pt-content.com/images/pt/2016/09/20160830_194259-1.jpg

[Mr.VENGEANCE]

yup!

[Mr.VENGEANCE]

My chinspoiler works on a 69 also.. here is it on Killer Mike's 69 Firebird im building.

https://static1.pt-content.com/images/pt/2016/09/29694972360_802b6a83ee_o-1.png

[csouth]

My chinspoiler works on a 69 also.. here is it on Killer Mike's 69 Firebird im building.

https://static1.pt-content.com/images/pt/2016/09/29694972360_802b6a83ee_o-1.png

Share any plans for the car? Didn't know he was in to muscle cars....

[Mr.VENGEANCE]

Yea I am building it for him in a light Streetfighter/Protouring style.. I have a hot GM LS3, Art morrison front clip, big Wilwood brakes, etc..

And im outfitting it with my kit minus the flares.

[csouth]

Yea I am building it for him in a light Streetfighter/Protouring style.. I have a hot GM LS3, Art morrison front clip, big Wilwood brakes, etc..

And im outfitting it with my kit minus the flares.

That should be really nice, hope you share it with us here. I'm from the SWAT's, now in Michigan

[Mr.VENGEANCE]

Haaa SWATS!!.. Stand up!

[Mr.VENGEANCE]

Fresh home from SEMA and this car at American Force wheels running my fender flares and spoilers.

https://static1.pt-content.com/images/pt/2016/11/30804082015_19cba78103_o-1.jpg

[Jerems]

Sweet!

[Rod]

yep we should talk....



Fresh home from SEMA and this car at American Force wheels running my fender flares and spoilers.

https://static1.pt-content.com/images/pt/2016/11/30804082015_19cba78103_o-1.jpg

[csouth]

Haaa SWATS!!.. Stand up!

Yep... Atlanta Public Schools representin'...lol


Fresh home from SEMA and this car at American Force wheels running my fender flares and spoilers.

That's a good look!

https://static1.pt-content.com/images/pt/2016/11/30804082015_19cba78103_o-1.jpg

[SparkyRnD]

Should have had them on display on sunday. Although the old school was cool.

[Mr.VENGEANCE]

Sunday?.. display in Sema?

What?

[shortrack]

:) :)

[Mr.VENGEANCE]

Dammit Rod, I want to just put a set on yours!

[Rod]

Dammit Rod, I want to just put a set on yours!

I will pm you tomorrow and find out if can work a deal with you, Jane is going under the knife in the off season Spectre Performance has a few custom interior parts going on the car and Viking performance is putting on the new Beserker setup on then some new tin is going on the car also and a litlle paint updating




https://static1.pt-content.com/images/pt/2016/11/zzz_7D23692_zpsmck2aluk-1.jpg

[Doug1]

Yeah, I'd be in on the second gen firebird.

[dangina]

curious when will the rear spoiler be available? is it taller than the stock spolier? I'm running the 69 camaro rear spolier on my roadrunner ( i know i know the mopar guys reactions are mixed at best) I wish it was just a few inches taller...

[Mr.VENGEANCE]

Yup its taller.. about 2 inches taller.


A customer of mine made a clone of my car Vengeance which he calls "Baby Vengeance" basically no LS motor(let alone an LS7) no frame mods, nor any big brakes.. but it looks cool?

I had to also photoshop his car lower...

At least he supported my kit and bought the chin spoiler and flares.
https://static1.pt-content.com/images/pt/2017/02/32216138244_d64ed55af8_b-1.jpg

https://static1.pt-content.com/images/pt/2017/02/32216138134_56df547a16_b-1.jpg


currently the Carbon is out of stock but the fiberglass is in.

www.thestreetfighters.com (http://www.thestreetfighters.com)

[MonzaRacer]

OK can I say sure the shiny fender stripe, shiny flares in CF, shiny black lip on wheel , hoooolllleeeeyyy shnikies that just looks plain BAD ASSSSSSS. AND CF spoiler ,splitter. Shaweeeeeet.

[76TA]

I'm in for the 2nd gen Trans Am Firebird rear wheel flares. I'll place the order the second they are available.

- Andrew

[Mr.VENGEANCE]

working on them!

[Rod]

I recently added the Streetfighter flares to Plain Jane..... this allowed the use of 10.5 inch rims on all for corners and 315 tires ..... I can probably get 335 rears on the car but then I have to get the rims widened


151582

here is the car at Goodguys last weekend



https://www.youtube.com/watch?v=aORTrPf82ig

[Mr.VENGEANCE]

Whoaaaaaah!!!.. I havent seen it on you car yet!.. Awesome Rod!!!


I need to get you some stickers!.. I forgot to put them in the box.

[Rod]

you can see that the rear fender flare adds about 2 1/2 inches to the outside of the lip, so after removing the lip you also gain the 1inch lip thickness and what ever gap from the lip to your current wheel fitment..... I can easily run a 12inch rim and 335, this was a no brainer for me because Jane was in need of quarter panels they were rusting away

151579


151580

[Rod]

151581

[Mr.VENGEANCE]

forgive my horrible writing.. lol.

[ho428]

Saw the "Vengeance" on Cars and Coffee recently.
Nice rear Spoiler.

[76TA]

Any update on 2nd gen flares?

[duckmanjbr]

Does anyone know if theses rear wings and spliters still available? I've emailed but haven't got any response in a month or so. Just curious if he's still making them.

[Mr.VENGEANCE]

they are!.. email me at: [email protected]

[Mr.VENGEANCE]

Been a while guys but I got some new wheels cut 18x12 and 18x14 and installed my fender flare kit with my rear wing too.

https://static1.pt-content.com/images/pt/2018/09/43753699684_973bfb123e_o-1.jpg

https://static1.pt-content.com/images/pt/2018/09/44471905341_634950062e_o-1.jpg

https://static1.pt-content.com/images/pt/2018/09/44472179361_4b425e0c4e_o-1.jpg

https://static1.pt-content.com/images/pt/2018/09/29533895207_073862accf_o-1.jpg

https://static1.pt-content.com/images/pt/2018/09/44472321441_97624bf78b_o-1.jpg

https://static1.pt-content.com/images/pt/2018/09/30602195768_e64e627206_o-1.jpg


I hope all of you are doing well!!

[79T/Aman]

any 2nd gen stuff?

[Mr.VENGEANCE]

I have flares ready just working on other parts for the 2nd gen

[Just 1 More]

What suspension are you running on the 1st gen cars?

[79T/Aman]

could you show the flares?

[arriusone]

Any rear wings in stock ?

[7Knapp]

Looking to get a set of flares for my 67. I've emailed and PM'd you. Is there a better way to order some?
Thanks

[cdoggy81]

Updates?

[arriusone]

Hello, any rear spoliers in stock? I need one for my bird man //

[srode]

Is your website accurate for stock and pricing?

[Hutchracer]

love the Samurai wall art with the Z car. Great looking Camaro with all the carbon to accent the paint. Would love some carbon fiber goodness for my 57 Chevy