Trackside-Brandy
04-29-2016, 11:46 PM
https://static1.pt-content.com/images/pt/2016/04/IMG_3999_zpsew1fhbik-1.jpg
CAM Challenge Intro and Quick Recap of Day 1
Written by Brandy Phillips
Photos by Brandy Phillips
The CAM Challenge is a fairly new event in the pro-touring community. SCCA’s introduced a new group called CAM back
in 2014, mainly focusing on American muscle. This helped encourage more pro-touring members get involved with SCCA
throughout the last couple years. Drivers like Mary Pozzi, Mike Maier, Brian Hobaugh are some of the original SCCA
members from our pro-touring community, but those like Richard Truijllo, Ian Sakurai and Mike Young are all regulars in
the current SCCA scene. With more drivers participating in SCCA autocross events, it is only a matter of time before
SCCA will start offering more and more for the pro-touring enthusiasts.
https://static1.pt-content.com/images/pt/2016/04/IMG_4144_zpsumwhwojp-1.jpg
Since the CAM Challenge is still new, the details, class categorization and rules are still in the process of being modified.
This event will be a learning curve for many including event organizers and racers. Though the event itself is only three
years old, SCCA has deep racing roots that have helped form and modifying the rules and layout of this weekend’s CAM
Challenge.
https://static1.pt-content.com/images/pt/2016/04/IMG_4143_zpsjgcj4s9v-1.jpg
The CAM Challenge is a three day event, though most drivers will not participate in all three days. Friday morning started
with an EVO driving school. Though the school is not part of the CAM Challenge, racers could still register for that event,
getting some seat time with instructor Mary Pozzi before race day.
https://static1.pt-content.com/images/pt/2016/04/IMG_4017_zpsstqo7hyu-1.jpg
At 11:00 the track officially opened for test and tune runs. Anyone registered for the event had the opportunity to come
out and shake down their vehicle before Saturday’s official laps, though an additional fee was required. Four test laps
cost a driver $10.
https://static1.pt-content.com/images/pt/2016/04/IMG_4145_zpsjvjouapn-1.jpg
In my case, I was able to make about a dozen laps for $30, dialing in the truck for the type of surface conditions as well
as making minor adjustments for a larger track setup. If a driver has the chance to play hooky from work for the day, this
could be a very valuable opportunity before Saturday.
https://static1.pt-content.com/images/pt/2016/04/IMG_4155_zpskydphtfl-1.jpg
Registration was also open as well as a end-of-day track walk. Though I had registered for the event itself, SCCA still
requires a membership in order to run in their events. Honestly, it wasn’t a big deal since a weekend membership cost me
$15. Driver’s who are not SCCA member also have the opportunity to purchase an annual SCCA membership. This is
probably the best option if you plan to do multiple SCCA events throughout the year.
https://static1.pt-content.com/images/pt/2016/04/IMG_4150_zpsxwdbpb9i-1.jpg
Test and tune ended at 3pm so officials could begin setting up the larger autocross course for the weekend. During this
time registration and tech were open. Once the cones were reorganized, a test car was sent to make sure that the track
would accommodate all sizes of vehicles racing Saturday. Once the test car was done, the course was open for track
walks for the remainder of the evening.
https://static1.pt-content.com/images/pt/2016/04/IMG_4127_zpsxzehtp1u-1.jpg
Like all SCCA events, participants have the opportunity to race three laps during two sessions throughout Saturday.
Drivers are divided into their classes CAM-S, CAM-T and CAM-C. When a driver is not racing around the autocross or
sitting in the staging area, they are working the course, which is a typical SCCA routine. My theory is that there’s no one
better to work the course than those who race and respect it for what it is.
https://static1.pt-content.com/images/pt/2016/04/IMG_4156_zps2hgfykmm-1.jpg
Saturday brings official timing. Drivers will arrive early for prep, course walk and drivers meeting. Course walk will open
at 8:15am allowing only 15 minutes for drivers to go over anything they missed on Friday. A driver’s meeting is scheduled
for 8:30 before the track goes hot at 9am.
https://static1.pt-content.com/images/pt/2016/04/IMG_4115_zpscaytnlbq-1.jpg
Saturday will most likely go by extremely quick. With only six runs, drivers will be focused on making those six runs
count. Once all three groups have run two sessions, the track is closed and everyone is invited to join in on an event/
award dinner at a local Mexican restaurant.
https://static1.pt-content.com/images/pt/2016/04/IMG_3982_zpsdx9ixuvh-1.jpg
Though the overall awards are given Sunday after the shootout, the CAM Challenge also hands out awards on Saturday
during the dinner gathering. This is the first year that the CAM Challenge will be holding a dinner Saturday evening.
Honestly, I think this is what will set this event apart from most others if they continue to do this dinner at each CAM
Challenge event.
https://static1.pt-content.com/images/pt/2016/04/IMG_3988_zps9s6ba0xi-1.jpg
Once Sunday comes, times start all over, though the track layout will be the exact same as it was on Saturday. With most
SCCA events, the track layout will change. When I heard that the track would stay the same throughout the entire
weekend, I was curious to why this had changed from the long-standing SCCA tradition.
https://static1.pt-content.com/images/pt/2016/04/IMG_4136_zps0yjcsoe7-1.jpg
Since the CAM series is new, there is a lot of room for growth. Growth happens by encouraging new people to not only
try an SCCA event, but continue to come back again and again. Many of the CAM drivers this weekend have originated
from Goodguys, NMCA Hotchkis Autocross and other local autocross events. Raleigh, who is in charge of the CAM
Challenge this weekend, explained that he wants every participant to walk away with something this weekend, even if
they do not win. By keeping the track the same both days, drivers can hopefully improve their laps each time out and
leave on Sunday feeling like they have accomplished something. When Raleigh put it this way, I was overly impressed
by the amount of consideration and thought he had put into these new SCCA participants. His goal is to grow the series
and by thinking about the new guys, he is most likely going to succeed.
https://static1.pt-content.com/images/pt/2016/04/IMG_4149_zpswgc47qi8-1.jpg
Sunday’s schedule is slightly different than Saturday. Drivers only have three runs in the morning. Each of these runs will
count toward their overall time. This overall time will then dictate if a driver will move on to the final shootout later that
afternoon. As of Friday, the plan was to take the top eight drivers from each class and move them into the final shootout
to battle for the overall win. Though registration was closed some time ago, walk-in competitors are still able to register
the day of the event. Depending on the amount of total participants in each class, the number of drivers that move on to
the shootout may change come Sunday.
https://static1.pt-content.com/images/pt/2016/04/IMG_4158_zpslprzovfu-1.jpg
Overall I am extremely excited to see how the weekend will play out. As I took a walk around the course, it was a little
intimidating. It has been a very long time since I participated in an SCCA event. Honestly I do not remember the types
of track layouts, but one thing is for sure, this one is not going to be easy. I was able to complete a rough sketch of the
course, which I will add in my final recap (please forgive my drawing when I do). Let’s just say this: it’s very technical,
it’s going to be very fast and hopefully I won’t get lost.
https://static1.pt-content.com/images/pt/2016/04/IMG_4004_zpsugnscvnh-1.jpg
So that’s it. If anyone has questions about the CAM Challenge or how to participate in any of the other events across the
country, please do not hesitate to pm me or email me at [email protected]. I look forward to sharing my newbie
experience with all of you after this weekend and I wish all the competitors the best of luck over the next two days.
CAM Challenge Intro and Quick Recap of Day 1
Written by Brandy Phillips
Photos by Brandy Phillips
The CAM Challenge is a fairly new event in the pro-touring community. SCCA’s introduced a new group called CAM back
in 2014, mainly focusing on American muscle. This helped encourage more pro-touring members get involved with SCCA
throughout the last couple years. Drivers like Mary Pozzi, Mike Maier, Brian Hobaugh are some of the original SCCA
members from our pro-touring community, but those like Richard Truijllo, Ian Sakurai and Mike Young are all regulars in
the current SCCA scene. With more drivers participating in SCCA autocross events, it is only a matter of time before
SCCA will start offering more and more for the pro-touring enthusiasts.
https://static1.pt-content.com/images/pt/2016/04/IMG_4144_zpsumwhwojp-1.jpg
Since the CAM Challenge is still new, the details, class categorization and rules are still in the process of being modified.
This event will be a learning curve for many including event organizers and racers. Though the event itself is only three
years old, SCCA has deep racing roots that have helped form and modifying the rules and layout of this weekend’s CAM
Challenge.
https://static1.pt-content.com/images/pt/2016/04/IMG_4143_zpsjgcj4s9v-1.jpg
The CAM Challenge is a three day event, though most drivers will not participate in all three days. Friday morning started
with an EVO driving school. Though the school is not part of the CAM Challenge, racers could still register for that event,
getting some seat time with instructor Mary Pozzi before race day.
https://static1.pt-content.com/images/pt/2016/04/IMG_4017_zpsstqo7hyu-1.jpg
At 11:00 the track officially opened for test and tune runs. Anyone registered for the event had the opportunity to come
out and shake down their vehicle before Saturday’s official laps, though an additional fee was required. Four test laps
cost a driver $10.
https://static1.pt-content.com/images/pt/2016/04/IMG_4145_zpsjvjouapn-1.jpg
In my case, I was able to make about a dozen laps for $30, dialing in the truck for the type of surface conditions as well
as making minor adjustments for a larger track setup. If a driver has the chance to play hooky from work for the day, this
could be a very valuable opportunity before Saturday.
https://static1.pt-content.com/images/pt/2016/04/IMG_4155_zpskydphtfl-1.jpg
Registration was also open as well as a end-of-day track walk. Though I had registered for the event itself, SCCA still
requires a membership in order to run in their events. Honestly, it wasn’t a big deal since a weekend membership cost me
$15. Driver’s who are not SCCA member also have the opportunity to purchase an annual SCCA membership. This is
probably the best option if you plan to do multiple SCCA events throughout the year.
https://static1.pt-content.com/images/pt/2016/04/IMG_4150_zpsxwdbpb9i-1.jpg
Test and tune ended at 3pm so officials could begin setting up the larger autocross course for the weekend. During this
time registration and tech were open. Once the cones were reorganized, a test car was sent to make sure that the track
would accommodate all sizes of vehicles racing Saturday. Once the test car was done, the course was open for track
walks for the remainder of the evening.
https://static1.pt-content.com/images/pt/2016/04/IMG_4127_zpsxzehtp1u-1.jpg
Like all SCCA events, participants have the opportunity to race three laps during two sessions throughout Saturday.
Drivers are divided into their classes CAM-S, CAM-T and CAM-C. When a driver is not racing around the autocross or
sitting in the staging area, they are working the course, which is a typical SCCA routine. My theory is that there’s no one
better to work the course than those who race and respect it for what it is.
https://static1.pt-content.com/images/pt/2016/04/IMG_4156_zps2hgfykmm-1.jpg
Saturday brings official timing. Drivers will arrive early for prep, course walk and drivers meeting. Course walk will open
at 8:15am allowing only 15 minutes for drivers to go over anything they missed on Friday. A driver’s meeting is scheduled
for 8:30 before the track goes hot at 9am.
https://static1.pt-content.com/images/pt/2016/04/IMG_4115_zpscaytnlbq-1.jpg
Saturday will most likely go by extremely quick. With only six runs, drivers will be focused on making those six runs
count. Once all three groups have run two sessions, the track is closed and everyone is invited to join in on an event/
award dinner at a local Mexican restaurant.
https://static1.pt-content.com/images/pt/2016/04/IMG_3982_zpsdx9ixuvh-1.jpg
Though the overall awards are given Sunday after the shootout, the CAM Challenge also hands out awards on Saturday
during the dinner gathering. This is the first year that the CAM Challenge will be holding a dinner Saturday evening.
Honestly, I think this is what will set this event apart from most others if they continue to do this dinner at each CAM
Challenge event.
https://static1.pt-content.com/images/pt/2016/04/IMG_3988_zps9s6ba0xi-1.jpg
Once Sunday comes, times start all over, though the track layout will be the exact same as it was on Saturday. With most
SCCA events, the track layout will change. When I heard that the track would stay the same throughout the entire
weekend, I was curious to why this had changed from the long-standing SCCA tradition.
https://static1.pt-content.com/images/pt/2016/04/IMG_4136_zps0yjcsoe7-1.jpg
Since the CAM series is new, there is a lot of room for growth. Growth happens by encouraging new people to not only
try an SCCA event, but continue to come back again and again. Many of the CAM drivers this weekend have originated
from Goodguys, NMCA Hotchkis Autocross and other local autocross events. Raleigh, who is in charge of the CAM
Challenge this weekend, explained that he wants every participant to walk away with something this weekend, even if
they do not win. By keeping the track the same both days, drivers can hopefully improve their laps each time out and
leave on Sunday feeling like they have accomplished something. When Raleigh put it this way, I was overly impressed
by the amount of consideration and thought he had put into these new SCCA participants. His goal is to grow the series
and by thinking about the new guys, he is most likely going to succeed.
https://static1.pt-content.com/images/pt/2016/04/IMG_4149_zpswgc47qi8-1.jpg
Sunday’s schedule is slightly different than Saturday. Drivers only have three runs in the morning. Each of these runs will
count toward their overall time. This overall time will then dictate if a driver will move on to the final shootout later that
afternoon. As of Friday, the plan was to take the top eight drivers from each class and move them into the final shootout
to battle for the overall win. Though registration was closed some time ago, walk-in competitors are still able to register
the day of the event. Depending on the amount of total participants in each class, the number of drivers that move on to
the shootout may change come Sunday.
https://static1.pt-content.com/images/pt/2016/04/IMG_4158_zpslprzovfu-1.jpg
Overall I am extremely excited to see how the weekend will play out. As I took a walk around the course, it was a little
intimidating. It has been a very long time since I participated in an SCCA event. Honestly I do not remember the types
of track layouts, but one thing is for sure, this one is not going to be easy. I was able to complete a rough sketch of the
course, which I will add in my final recap (please forgive my drawing when I do). Let’s just say this: it’s very technical,
it’s going to be very fast and hopefully I won’t get lost.
https://static1.pt-content.com/images/pt/2016/04/IMG_4004_zpsugnscvnh-1.jpg
So that’s it. If anyone has questions about the CAM Challenge or how to participate in any of the other events across the
country, please do not hesitate to pm me or email me at [email protected]. I look forward to sharing my newbie
experience with all of you after this weekend and I wish all the competitors the best of luck over the next two days.