encasedmetal
04-25-2016, 12:31 PM
Just picked up a 2010 L96 6.0 engine with wiring/ecu/pedal/maf etc and need to find someone who can rework the stock harness for me to run it as a standalone in my 85' C10. Looking for any vendors here that can help me out as I can't this particular harness listed on other popular DIY sites or outside vendors. thanks
Johnny@Speartech
06-17-2016, 07:52 AM
Hello, we can perform a standalone rework for this setup. http://www.speartech.com/product_p/58xrework.htm
jeeper90
06-18-2016, 09:28 AM
Lt1350.com used to do this work. Good luck. You might also try GM directly. I purchased the complete wiring, fbw pedal, ecm, and o2 sensors for about $960.00 two years ago. Scroggin dickeys.