Recommendation - Driveshaft loop for 1st Gen Camaro

[rocketrod]

As the title says I am looking for a driveshaft loop recommendation. There are plenty to choose from, but so far I believe I may go with one these, unless someone has a better option.

Metco
http://www.jegs.com/i/Metco-Motorsports/681/MDL7000/10002/-1?parentProductId=1336611

Heidts
http://www.summitracing.com/parts/hdt-rc-037/overview/year/1969/make/chevrolet/model/camaro

[MattG]

As the title says I am looking for a driveshaft loop recommendation. There are plenty to choose from, but so far I believe I may go with one these, unless someone has a better option.

Metco
http://www.jegs.com/i/Metco-Motorsports/681/MDL7000/10002/-1?parentProductId=1336611

Heidts
http://www.summitracing.com/parts/hdt-rc-037/overview/year/1969/make/chevrolet/model/camaro

Hi Rod!
I used the Metco but because my engine was set so far back, I had to modify it quite a bit to make it fit. Also, because it had to be installed farther back than stock, it had interference with my exhaust. I made it work, but almost threw it away about 10 times trying to make it fit!

Hope this helps...
Matt

[rocketrod]

Thanks Matt.....I appreciate the insight.