F/S: New Black Bowler 6" Dog-leg Industrial Shift lever+ 5-speed shift knob

[67L88Vette]

Folks,
This shifter didn't work out for me in my '67 Corvette console with the LGT trans I was using, so I no longer need it. the shifter and knob are in good condition, and have the black anodizing on both. The shift lever itself is the 6" version, with the 30 degree kick back. It has been mounted up once for fitment, and has some minor scratches on the front side of the lever, otherwise both parts in like new. Sorry I don't have the mounting fasteners, but that should be easy to round up. The lever will work on TKO500, TKO600, LGT-700 5 speeds, and the T-56 6 speed. New Info: I'm keeping the knob, selling just the lever! $85 shipped to your door in the lower 48 States, and I can take PayPal. My loss is your gain ... Thanks for looking!
John A, 67L88Vette

https://static1.pt-content.com/images/noimg.gif (http://s802.photobucket.com/user/67L88Vette/media/Corvette%20Parts/Other%20Parts/100_4046_zpse45j6qgq.jpg.html)

https://static1.pt-content.com/images/noimg.gif (http://s802.photobucket.com/user/67L88Vette/media/Corvette%20Parts/Other%20Parts/100_4047_zpsxgm5cskb.jpg.html)

https://static1.pt-content.com/images/noimg.gif (http://s802.photobucket.com/user/67L88Vette/media/Corvette%20Parts/Other%20Parts/100_4048_zpslsfj46fb.jpg.html)

https://static1.pt-content.com/images/noimg.gif (http://s802.photobucket.com/user/67L88Vette/media/Corvette%20Parts/Other%20Parts/100_4049_zpspf92sylo.jpg.html)

[67L88Vette]

To the top ... Happy to consider reasonable offers ... Will separate if I need too
John A, 67L88Vette

[67L88Vette]

Bump to the top with new pricing ... I'm going to keep the shift knob, so just the lever is for sale now. $85 shipped to your door in the lower 48 States. First one to PM me they want it gets it! I will be away from the Forum starting Monday thru Thursday of this week, but can get the lever shipped out before I leave if you act soon ... Thanks for looking!
John A, 67L88Vette

[67L88Vette]

Real nice shift lever still available!! $85 shipped to your door in the 48 States!
John A, 67L88Vette

[feeble]

What is the diameter and C-C distance of the holes at the base on the lever? How thick is the material? Thread size at the top?

Trying to determine if it would fit a Hurst Billet plus shifter for a Fox Body T5.

Thx!

[67L88Vette]

You can go to Bowler's site and get get some of the info:

http://bowlertransmissions.com/p/433/billet-shifter-shift-lever-for-tko-500-600-t56-t56-magnum-t-56

They say the thread size for the shift knob is 3/8-16, the mounting holes are 3/8 ID on a 0.890" C-to-C, and I measured the shifter thickness at 0.503". Sorry I'm not sure about the T-5 fitment ...
Sincerely,
John A, 67L88Vette

[67L88Vette]

Just looked at Hurst's website, and it appears that the T-5 shifter has a 3/8 ID as well, but on a .875" C-to-C, so its very close but not the same. You should double check my homework, LOL, or someone else who knows can kindly chime in ...
John A, 67L88Vette

[feeble]

Thanks for the info. I'm still interested but have been very busy this week. I'll try to check things out tonight.

[67L88Vette]

Shawn,
No worries here ... I know how it goes sometimes. The C-to-C is just 15 thou different provided I did my homework correctly, so this isn't much and could likely be easily taken care of with a round file and a flat washer, LOL.
John

[feeble]

As much as I like this, I'm going to pass, it's about an inch longer than my existing handle. Thx for getting the dimensions.

[67L88Vette]

Okay, Shawn, thanks for letting me know! Good luck with your build.
John A, 67L88Vette

[67L88Vette]

Bump to the top ... Still have the shift lever ... Practically new, installed only for a couple of hours, and removed. $85 shipped to your door in the lower 48 States ...

John A, 67L88Vette

[67L88Vette]

Sale pending ...

John A, 67L88Vette

[67L88Vette]

SOLD !! Thanks, Mike!

Mods, you may remove this thread if desired ...
John A, 67L88Vette