PDA

View Full Version : Monster LS2



ProStreet R/T
11-02-2005, 12:25 PM
Looks like 1" head spacers and new sleves.. curious to see the specs, 4.5" stroke with a 4.2" bore would be interesting, make for a monster street turbo motor.
500ci SB now that could make things interesting.
https://static1.pt-content.com/images/noimg.gif

Travis B
11-02-2005, 12:35 PM
WOW :jawdrop:

Ralph LoGrasso
11-02-2005, 03:19 PM
WOW is right! I'll take two, actually -- better make it three.

scottyz
11-02-2005, 07:33 PM
Who is building that and where did you get that pic? Is it going to actually be 500 cid

Norwoodx55
11-02-2005, 07:44 PM
Wow! 4.5" seems like quite a bit of stroke for a 4.2" bore :geek:
498.8 inches of aluminum small block would be pretty bitchin' though.

ProStreet R/T
11-02-2005, 07:55 PM
Who is building that and where did you get that pic? Is it going to actually be 500 cid


hehe, there is this little gathering in Vegas, you might have heard about it.

4.2 bore and 4.5 stroke is just my guestimation about how they would get to 500ci. The LS2 has (I believe) a 4.40" bore center so they won't be going much over 4.2 bore. I'd like to get a closer look at the crank and guts of the block tho. The rod:stroke ratio won't be too wild with the deck spacers so it should be a pretty reliable combo. I tell ya that thing would be nasty with a single 91mm ish turbo.

Fuelie Fan
11-04-2005, 09:29 AM
That thing would be nasty WITHOUT a turbo.

CarlC
11-04-2005, 05:41 PM
Yep, it was at SEMA.

Kenova
11-06-2005, 04:40 PM
World Products?
Ken

CarlC
11-06-2005, 04:52 PM
Take a close look at the picture above for a web address.

ViperBlue68
11-07-2005, 02:58 PM
Take a close look at the picture above for a web address.

Here you go guys http://www.erlperformance.com/ :firefire: