Bead rolled and dimpled 67-69 Camaro Filler Panel

[vannatta20]

170$ with free shipping. Easier this way than doing shipping quotes. 160$ total for the design without dimples. https://www.pro-touring.com/attachment.php?attachmentid=121092&stc=1https://www.pro-touring.com/attachment.php?attachmentid=121091&stc=1

If anyone is interested please PM me.

[slimjim]

Whereabouts are you located?

[vannatta20]

Parts are in Missouri. Thats were our shop is. By Kansas City

[Rod]

looks great

[Shaneous]

I'll take it, PM sent

Cheers,
Shane

[dasmith76073]

Dang, I like that.. Did you purchase it or make it? I would like to get one as well.

Dave

[jjteatz]

That is a cool piece. I'd b interested in one possibly

[brycedrue]

Hell ya, that thing's cool man

[jamminj007]

IIll take one

[vannatta20]

All PM's replied to. Have a few sets left. We have one of this design as well I forgot to post up121113 Its 10 $ less

[thumper877]

Hey I'm in Kansas City too. Where u located at. It says u have a shop. What kind of work do u do. Always looking for a good shop. Thanks

[camrat68]

I'll take one of the second design. PM me with payment details and price please.

Jim

[vannatta20]

I need to contact ADMIN for this site to see about becoming a Vender. We can make more of these and even change designs. I feel blind. Dont see where or what to do about becoming a vendor?

[vannatta20]

Hey I'm in Kansas City too. Where u located at. It says u have a shop. What kind of work do u do. Always looking for a good shop. Thanks

Our shop is by Sedalia, MO in the small town of La Monte. We do alot of LS1 swaps and custom fabrication. PM for more info

[jaycoy65]

I would me interested in one if u could make it to where it covers the top of core support. Also if u make a hood latch pocket so it for down inside of the latch pocket

[srt1010]

I would me interested in one if u could make it to where it covers the top of core support. Also if u make a hood latch pocket so it for down inside of the latch pocket

Ditto: Any chances of one that covers the core support. Looks great by the way.

[vannatta20]

i was working on designing one that would cover the core support and angled along with the brace on each side. I somewhat failed when I measured out the bead rolled lines and messed up the panel. Ill have my brother give it a try.

[jaycoy65]

I def would buy that!! I seen one like that on someone's car but they don't make hem anymore!! And it was just a flat panel. I like yours having the contour. I'll prefer without holes though.. Can u do something around the latch area so it's more closed off.. U seen one like that but it's fiberglass

[vannatta20]

We can do any custom touches as well. For example if you ran aerocatch hood latches then we would not have a latch opening. Also we are coming out with a few different options on the fillers. You guys let us know what you want and we will make it! Just shoot me a PM and let me know.

[tetertrux]

Very nice looking panel, will definitely be watching for more pics of the one that follows the fender braces. Very interested.

[gSwift]

I"ll take one of the second design for now. But if you ever make one that covers the core support, i'll buy that one too. Payment of the way

[jaycoy65]

Can u let me know when u make one that will go over the radiator support? Also might be interested in the one that would follow the strut bars up the fender

[vannatta20]

Here are the current design we are shipping. We need feed back on the latch hole. Would you guys like the hole as small as possible? This offsets it. We can make it as first pictured which is symmetrical but bigger. I run aerocatch latches so I dont need one at all which looks great.

121344

[jaycoy65]

I might take one of the latch cutout to be as small as possible and u make them over the core support or following the braces..

[68sixspeed]

One note on the latch cutout, the Fesler and similar billet hood catches are thicker than the stock stamped one, I know the cutout in the Undercover Innovations filler panel is not big enough for the billet catches to make it through. I can get some measurements if you would like. Might be worth having an oversize hole version for those type of latches.

[LonnieJ]

Pm sent:)

[camrat68]

PM sent.

Jim

[ClosNova805]

Anything for the x body novas

[Zl1427]

I'll take 1. Third over from the right.

[67BrewserSS]

I'm assuming these are aluminum?

[Zl1427]

When will these be available to purchase ?

[nvmyss]

I know this is a few months old but have you come up with one that covers the core support?

[sginphx]

I am in the same boat...DSE quit making the panel that follows the supports and that is what Im looking for...If you have them, please let me know also. Would buy one in a second! Thanks, Shane

[LonnieJ]

Don't get your hopes up! I haven't received a reply back from multiple PMs starting in March:( I too would like to purchase one:)

[MangeMD]

There is a guy that is fabricating the DSE style from fiberglass. I'll have to try to find the thread.

[sginphx]

I just emailed the original poster (the brother) and have talked to the brother that builds them. He is mocking one up for me and should be on the site in the next day or two. He knew about the site but has never been...he builds some nice stuff for C10's and looks like quality stuff. You all should be hearing soon

[HerbyJr]

I am interested in buying one.

[vannatta20]

Just PM me and I will send you my brothers info. He can make any panels you need. He is also making front spoilers that look great

[HerbyJr]

Can you post a picture of the front spoilers?

[vannatta20]

128487128488

These are for a C10 but he used a camaro spoiler as a template. I am trying to get him to make me one for my 68 Bird. If you guys want front and rear spoilers let me know and Ill get him on it. They are affordable too.

[vannatta20]

Here is his C10 with them on

128489

128490

[markiemark]

I'm interested in getting something made for my 70 Nova. Any useful contact info for this guy would be appreciated. Thanks

[ricoshay]

Im interested in the side panels as well. Is he fabbing those for maros as well?

[turner69camaro]

I'm interested in one as well. Either the front one or the one that is like the old DSE

[ajs1luv]

Does this product still exist?

[sginphx]

Ajs..look up jason vanetta on Facebook. He responds fast and does great work

[slazisme]

Try here
https://automotivejunkies.com/products/1967-1969-camaro-aluminum-core-support-closeout-panel-with-dimple-died-holes