LS3 480HP Crate Motor-T56 Magnum-Ultimate Headers and More

[Jdseeling]

I am listing some parts from my 68 Camaro.I have had the project listed for a couple months and have received some good offers but not what I need.So, I am going to start changing some of the parts I know I was going to and finish the car this next year.Here is what is up for sale.

-LS3 480 HP GM Crate Motor, brand new.
-Comp Cams LS cam for the crate motor.Should put power in the 530-540 range, brand new.
-Ultimate mid-length LS headers finished in mirror polish, brand new.
-Centerforce DFX Clutch kit.This was a slightly used clutch kit I bought from a member off of LS1Tech.
-T56 Magnum Transmission.This came with my car and is slightly used.
-Quick Time LS Bell Housing, brand new.
-Fifth gen Camaro fuel pump.Rated to 650HP.I was going to use this with a Vaporworx Rick’s Tank.

I would like to sell this as package deal.If I do not get any hits I may sell parts individually but the motor would need to be sold first.This is well over $12,000 in parts.It would be a drop in setup minus a flywheel, Valve springs and ECU.I’m listing it all for $8,500 plus shipping.Open to Offers.

I also have a Be Cool Radiator and dual fan setup for a big block that I am switching too.This is slightly used and came on my car.I am listing it for $700 plus shipping.Open to Offers.

I worked with a forum member who owns his own shipping company.I suggest working with him on a quote for shipping, especially the motor.I can give you that info if needed.I will only accept cash or PayPal.If you do not want to send the PayPal money as a family member then you will need to cover the 3% charge.I am located in Northern VA.I can be reach on my cell at 703-447-2058.

I will post pics of the other items tonight.

[piratebaseball]

Are you interested in bbc parts plus cash or as partial trade? I was building a hydraulic roller 427 with afr heads before switching to the ls route.

[gearhead 69]

How much would u sell the the t56 with the bell housing? What was is mated to previously?

[jbrown183]

Would like to see pics and part nos, if available, of the radiator/fan setup.
Thanks

[MTZ28]

pm sent

[gSwift]

PM'd

[BigblockBob]

Is package deal still available?
Bob

[Camarowarrior71]

How much for much for The Motor?








I am listing some parts from my 68 Camaro.I have had the project listed for a couple months and have received some good offers but not what I need.So, I am going to start changing some of the parts I know I was going to and finish the car this next year.Here is what is up for sale.

-LS3 480 HP GM Crate Motor, brand new.
-Comp Cams LS cam for the crate motor.Should put power in the 530-540 range, brand new.
-Ultimate mid-length LS headers finished in mirror polish, brand new.
-Centerforce DFX Clutch kit.This was a slightly used clutch kit I bought from a member off of LS1Tech.
-T56 Magnum Transmission.This came with my car and is slightly used.
-Quick Time LS Bell Housing, brand new.
-Fifth gen Camaro fuel pump.Rated to 650HP.I was going to use this with a Vaporworx Rick’s Tank.

I would like to sell this as package deal.If I do not get any hits I may sell parts individually but the motor would need to be sold first.This is well over $12,000 in parts.It would be a drop in setup minus a flywheel, Valve springs and ECU.I’m listing it all for $8,500 plus shipping.Open to Offers.

I also have a Be Cool Radiator and dual fan setup for a big block that I am switching too.This is slightly used and came on my car.I am listing it for $700 plus shipping.Open to Offers.

I worked with a forum member who owns his own shipping company.I suggest working with him on a quote for shipping, especially the motor.I can give you that info if needed.I will only accept cash or PayPal.If you do not want to send the PayPal money as a family member then you will need to cover the 3% charge.I am located in Northern VA.I can be reach on my cell at 703-447-2058 (tel:703-447-2058).

I will post pics of the other items tonight.

[badazz81z28]

Where are you located?

[Z06vet]

Ad says he is located in Northern VA, listed right before his phone #

[Jdseeling]

The transmission and headers are pending. I am talking with a guy about the motor today. No deposit on the motor yet. I will update later today. Thanks

[BigblockBob]

Any word yet?
Thx, Bob

[Jdseeling]

Trans and headers sold, remaining items pending.

[RobNoLimit]

Do you have a harness and ECU for the motor?

[BigblockBob]

David, Were you able to get the bell housing plate and hardware in the mail to me? Please advise. Thanks!

[WRC7732]

I'm interested in just the motor. Can you send me some details? Price?? Specs?? Sounds like it's the LS376/480?? and as another member asked, PCM and Harness included or no??

Not a deal breaker either way. Just helps determine value.

[WRC7732]

Just clicked on the pic of the motor and gave a bit more detail.

Looks like no computer / harness??

How much for the crate engine??

PM is fine.

Thanks,
Will


I'm interested in just the motor. Can you send me some details? Price?? Specs?? Sounds like it's the LS376/480?? and as another member asked, PCM and Harness included or no??

Not a deal breaker either way. Just helps determine value.

[g-machine]

Did the Quick Time Bellhousing sell? PM me.

Thanks,
George

[coachtek]

interested in the crate motor too... whats the price?