67 Chevelle SS build

[flyinmedic]

Hello everyone! I am putting together a 67 Chevelle SS for lots of cruising and some track time. I'm currently putting a Vintage air system in it along with UMI tubular upper/lower front and rear control arms with the rear uppers being adjustable. It's also getting Viking coilovers on all corners with the Ridetech rear coilover setup. The car is currently a 454, th400 with a 12 bolt and 3.73 gears and front disks. The next phase is to add full Bear disk setup, 35 spline axles with 9" housing ends, a trutrak or wavetrack and a Gear Vendors OD and a 4 point roll bar. I'm also doing and EFI conversion using the Holley Dominator EFI setup for better drivability. Finally it will be getting a Reher Morrison 583ci pump gas motor with a small shot for some track time. Here are some pics of the car currently just before I started to add anything. I am still trying to figure out a style of wheel for the car. I will update as I complete phases.

https://static1.pt-content.com/images/noimg.gif (http://s282.photobucket.com/user/flyinmedic/media/67%20Chevelle%20gold/PART_1445216540261_PART_1445208147409_PART_1445208 146206_20151018_153030_zpseecyrj03.jpg.html)
https://static1.pt-content.com/images/noimg.gif (http://s282.photobucket.com/user/flyinmedic/media/67%20Chevelle%20gold/509a7e43-580a-4e47-a455-efbbe81de3dc_zpskfg7bp2r.jpg.html)
https://static1.pt-content.com/images/noimg.gif (http://s282.photobucket.com/user/flyinmedic/media/2_zpsftabaa2x.jpg.html)

[Josh@Ridetech]

Great looking car, keep the progress pictures going! Let me know if you need anything when you get to the coilover system! :twothumbs

[Rag-Rat]

Very nice looking ride to start with.

[flyinmedic]

Great looking car, keep the progress pictures going! Let me know if you need anything when you get to the coilover system! :twothumbs

Thank you I appreciate that and will keep you in mind.


Very nice looking ride to start with.

Thank you.

[windows]

That car looks so good, I'd leave it just the way it is and find another project. Good luck with your build. Damn, that car is pretty.

[flyinmedic]

That car looks so good, I'd leave it just the way it is and find another project. Good luck with your build. Damn, that car is pretty.

Thank you. I really wanted to find a project that already had a nice body, paint and interior so that I could focus on the drivetrain and suspension.

[windows]

Thank you. I really wanted to find a project that already had a nice body, paint and interior so that I could focus on the drivetrain and suspension.

I should clarify. I didn't mean "you" should leave it the way it is. I meant "I" would be scared to touch it. Heck,I'd be scares to drive it, and I certainly would never eat an icecream cone while sitting in it. Again, good luck with you build. I'll be watching with interest.