Wiring to start

[ndpace]

I have a 2010 Mustang V8 motor with all the wiring harnesses. I have the factory wiring diagram. I have a SCT tunner with a tune that remove the PATS (passive anti theft system). I dont have the key or keyed ignition switch.
I am looking for some help/hints on what to look for in the wiring to get it setup to do a push button start.

Let me know if this is the wrong forum
thanks in advance, Jim
https://www.pro-touring.com/threads/103179-1966-2010-Mustang

[Sean Cooke]

If you have the diagram and the interior harness your going to need
START / IGNITION / 12VOLT
That would be a good place to start