Schwartz Performance
09-30-2015, 02:57 PM
Hey everyone,
We recently had a couple projects going on that the LS3 crate engine (Camaro/G8/CTSV) exhaust manifolds fit perfectly on, but the only flanges we could find were mild steel, or very expensive. So we came out with our own!
These are 3/8" thick so they won't warp, and tapped for 7/16" bolts.. So no messing around trying to hold bolts/nuts!
Available with a 2.25" or 2.5" outlet.
If building a turbo application with the manifolds flipped upside down, we can also make this in 1/2" thick stainless to prevent warping from the heat, they will cost a little extra but let me know if you're interested.
You can order them off our website here: http://www.schwartzperformance.com/product/ls3-exhaust-manifold-flanges-stainless-steel/
Or feel free to call an order in.
https://static1.pt-content.com/images/pt/2015/09/21613639945_91f4afe148_z-1.jpg
We recently had a couple projects going on that the LS3 crate engine (Camaro/G8/CTSV) exhaust manifolds fit perfectly on, but the only flanges we could find were mild steel, or very expensive. So we came out with our own!
These are 3/8" thick so they won't warp, and tapped for 7/16" bolts.. So no messing around trying to hold bolts/nuts!
Available with a 2.25" or 2.5" outlet.
If building a turbo application with the manifolds flipped upside down, we can also make this in 1/2" thick stainless to prevent warping from the heat, they will cost a little extra but let me know if you're interested.
You can order them off our website here: http://www.schwartzperformance.com/product/ls3-exhaust-manifold-flanges-stainless-steel/
Or feel free to call an order in.
https://static1.pt-content.com/images/pt/2015/09/21613639945_91f4afe148_z-1.jpg