PDA

View Full Version : 1st gen LS Swap Parts



s4dustin
09-14-2015, 03:58 PM
So...my car which was running then not running then on the way to running has taken a turn.... we are redoing the fuel system and a few other things so these parts need to go... Note- They were on the car for about a year....I would say no more than 500 miles if that on these parts, other than the drive shafts which I have had for a while...got from a friend. These parts have been in my garage for a few years now as my car has been down.

The Hooker Super Comp LS SWAP Headers- I had to bang a tube on each header for clearance...not that bad, but not perfect. Needs some paint or powder coating. Retail is about $570.00 on these plus tax. Asking $400.00 or best offer.

Ligenfelter 90mm MAF- Asking $150.00 or best offer

Spectra LS SWap Fuel injection Gas tank... I updated to a larger fuel pump, can't remember what right now...but worked great with my LQ9 and Magneuson Blower.... Retail is like $530.00. Asking $400.00 with the better pump which would be worth a couple hundred if my memory serves me correct. Note- I will open it up and see what it is if you want me to.... NOTE_ the corvette Fuel Pressure Reg. I will throw in with the tank.

Painless wiring harness- I paid about $500 or so plus tax. I have to get a picture of it... has been used and slightly modded, but otherwise in good order, just not as pretty as when you take it out of a new box. Asking $350.00

The two drive shafts....one carbon and one aluminum...$250.00 each. Buy them both and I will make you a better deal. PM me and I will get the measurements...

Paypal works... if shipping, you pay...

I also have the stainless 3/8 line I bent up for the fuel system. You buy the tank you can have that too.

Basically, you have your fuel system, harness, and exhaust...ready to go...

Would prefer pick up as these items are big.... I am in Calabasas, Ca.

Pics attached. PM me or email me at [email protected]

https://static1.pt-content.com/images/pt/2015/09/0914151622a_zpskeab7exv-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/connectedmediagroup012/0914151622a_zpskeab7exv.jpg.html)

https://static1.pt-content.com/images/pt/2015/09/0914151618b_zpsb2beritt-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/connectedmediagroup012/0914151618b_zpsb2beritt.jpg.html)

https://static1.pt-content.com/images/pt/2015/09/0914151619_zpssgvhe9et-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/connectedmediagroup012/0914151619_zpssgvhe9et.jpg.html)

https://static1.pt-content.com/images/pt/2015/09/0914151617_zpslefuvhxd-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/connectedmediagroup012/0914151617_zpslefuvhxd.jpg.html)

https://static1.pt-content.com/images/pt/2015/09/0914151618_zpsq16rfiiw-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/connectedmediagroup012/0914151618_zpsq16rfiiw.jpg.html)

https://static1.pt-content.com/images/pt/2015/09/0914151616b_zpsfakowtnk-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/connectedmediagroup012/0914151616b_zpsfakowtnk.jpg.html)

https://static1.pt-content.com/images/pt/2015/09/0914151616_zpsognawmn9-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/connectedmediagroup012/0914151616_zpsognawmn9.jpg.html)

https://static1.pt-content.com/images/pt/2015/09/0914151622_zpsvubdmtjw-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/connectedmediagroup012/0914151622_zpsvubdmtjw.jpg.html)

cwest
09-14-2015, 07:41 PM
Is the tank stock width?

FRISCOSIK7
09-14-2015, 08:12 PM
What's the length of the drive shafts

s4dustin
09-14-2015, 08:15 PM
Is the tank stock width?


Tank is stock everything other than being set up for fuel injection (LS SWAP).

s4dustin
09-14-2015, 08:15 PM
What's the length of the drive shafts


Ill measure tomorrow...