PDA

View Full Version : 3.5 exhaust pipe and bends!



WELTERRACER
10-25-2005, 07:05 PM
Does anyone know where i can get a bunch of 3.5 inch exhaust pipe and some 90 degree bends... doesnt have to be anything special..

Going to fab up some nice single exhuast for the camaro

MrQuick
10-25-2005, 07:49 PM
try peaking around the Diesel sites, they should know... 3"-5" pipe galor

Ralph LoGrasso
10-25-2005, 08:25 PM
I'm sure Stainless Works (www.stainlessworks.net) has what you need.

HHStang
12-26-2005, 03:49 PM
try summit

dhardison
12-26-2005, 04:59 PM
Jeg's carries StainlessWorks 3.5" pipe in 90 and j-bend.

http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10002&storeId=10001&categoryId=26183&parentCategoryId=10263&langId=-1

Dan

gen3bu
12-26-2005, 06:45 PM
i got a flowmaster 3.5" tailpipe kit and a 4' stick form jegs

Tom Nelson
12-28-2005, 04:02 PM
I've Got A Customer That Has A Single Four Inch We Are Going To Change For A 84 Camaro If Interested I'll Contact Him And See If Hell Get Rid Of It.