hotrodneb
09-07-2015, 06:33 AM
This ended up not working on my final assembly due to the fact that I moved my front bumper back so far (see my build thread link below)
I only modified the upper portion of my bumper and the bottom of the bumper was too wide to fit into the narrowed openings of the vailance.
Openings are narrowed about 4" on the outside if I remember right, and you can still reach the factory hood release since the center is unmodified.
69+ park/turn lights included
NO guarantee but I would believe this should fit a stock mounted bumper. You will need to modify your lower bumper bracket since the lights fall right where they go.
Installed pics can be seen on my build thread link below
$100 + ship
Private message please
https://www.pro-touring.com/attachment.php?attachmentid=116964&stc=1
I only modified the upper portion of my bumper and the bottom of the bumper was too wide to fit into the narrowed openings of the vailance.
Openings are narrowed about 4" on the outside if I remember right, and you can still reach the factory hood release since the center is unmodified.
69+ park/turn lights included
NO guarantee but I would believe this should fit a stock mounted bumper. You will need to modify your lower bumper bracket since the lights fall right where they go.
Installed pics can be seen on my build thread link below
$100 + ship
Private message please
https://www.pro-touring.com/attachment.php?attachmentid=116964&stc=1