ryeguy2006a
08-18-2015, 07:01 AM
I originally made these for my car and bought some extra materials. So now I have decided to make a second run of the aluminum fender braces and looking to see if there is anyone else that wants a set. I am looking to get $85 $60 shipped to the lower 48 states. I will consider shipping outside the lower 48 states for an added fee. I have a few sets made now, and here are pictures of what you can expect to receive. Here are the pictures of my braces installed on my car. They turned out really great, and I am very happy with them. Just as a note, I will take care of 98% of the scratches, but to make 100% perfect you will need to get some fine grit sandpaper and polish it.
These are the photos of the braces I made on my car. I have installed them with new J-nuts and stainless hardware.
https://static1.pt-content.com/images/pt/2015/08/9884109235_d798dcfa15_c-1.jpg
https://static1.pt-content.com/images/pt/2015/08/9884102325_6343fd70cc_c-1.jpg
https://static1.pt-content.com/images/pt/2015/08/9884098276_d1d6d6a97e_c-1.jpg
Here is the first set that I made to sell. You can see that there was a blemish on the bottom left brace that I sanded down, but to be 100% perfect you will need to sand it further and put a little more time into it. As is, they are ready to be bolted down onto the car and will look great.
https://static1.pt-content.com/images/pt/2015/08/9884085064_e785ce5294_c-1.jpg
https://static1.pt-content.com/images/pt/2015/08/9884175503_70fbd51b8c_c-1.jpg
https://static1.pt-content.com/images/pt/2015/08/9884060836_e00f925d57_c-1.jpg
I have sent messages to all those that have expressed interest. Please send me a personal message to me in order to let me know you would like a set.
Thanks,
Ryan
These are the photos of the braces I made on my car. I have installed them with new J-nuts and stainless hardware.
https://static1.pt-content.com/images/pt/2015/08/9884109235_d798dcfa15_c-1.jpg
https://static1.pt-content.com/images/pt/2015/08/9884102325_6343fd70cc_c-1.jpg
https://static1.pt-content.com/images/pt/2015/08/9884098276_d1d6d6a97e_c-1.jpg
Here is the first set that I made to sell. You can see that there was a blemish on the bottom left brace that I sanded down, but to be 100% perfect you will need to sand it further and put a little more time into it. As is, they are ready to be bolted down onto the car and will look great.
https://static1.pt-content.com/images/pt/2015/08/9884085064_e785ce5294_c-1.jpg
https://static1.pt-content.com/images/pt/2015/08/9884175503_70fbd51b8c_c-1.jpg
https://static1.pt-content.com/images/pt/2015/08/9884060836_e00f925d57_c-1.jpg
I have sent messages to all those that have expressed interest. Please send me a personal message to me in order to let me know you would like a set.
Thanks,
Ryan