CTSV
07-19-2015, 11:13 AM
This is the best type 2 pump you can get for any use and competition so if you know about KRC i will leave the descriptive short
this is a pro pump with attached aluminum reservoir. Polished 6 inch splined V belt pulley and the flow valve set letters and numbers. Approx 600 miles of use on the pump of street driving only
pump cost $729
Pulley cost $89
flow valves were another $125
asking $400 for everything shipped. You can also use a serpentine pulley as well on this pump which you can purchase direct from KRC or mail order catalogs
You can also use this pump with a remote reservoir as well with a -8 or -10 adaptor available through KRC for $19
I'm converting my entire front drive to a March Serpentine system and this pump will not work with the bracketry so i am using a polished March Pump instead.
this pump will fit all fords and chevy motors including LS and KRC makes the proper brackets for mounting so check their website for more details
PM, serious buyers only. Will ship worldwide but i am only offering free shipping in the USA
this is a pro pump with attached aluminum reservoir. Polished 6 inch splined V belt pulley and the flow valve set letters and numbers. Approx 600 miles of use on the pump of street driving only
pump cost $729
Pulley cost $89
flow valves were another $125
asking $400 for everything shipped. You can also use a serpentine pulley as well on this pump which you can purchase direct from KRC or mail order catalogs
You can also use this pump with a remote reservoir as well with a -8 or -10 adaptor available through KRC for $19
I'm converting my entire front drive to a March Serpentine system and this pump will not work with the bracketry so i am using a polished March Pump instead.
this pump will fit all fords and chevy motors including LS and KRC makes the proper brackets for mounting so check their website for more details
PM, serious buyers only. Will ship worldwide but i am only offering free shipping in the USA