View Full Version : Lateral Dynamics 3 link Rear Suspension for 1St Gen Camaro 67-69
Probably one of the last un installed virgin LD kits left in existance. Same rear suspension as Bad Penny & One lap Camaro. Kit is complete minus Shocks & Axles. All bars and major parts are there with the watts link. Housing is approximately 50 inches wide. Pick up in Scottsdale AZ or can bring to Orange Co CA over the next two weeks.
Ready to sell this $old pending funds!!
Call Corey 714-658-6291
https://www.pro-touring.com/attachment.php?attachmentid=114273&stc=1
If anyone in SoCal want’s the LD 3 link I will driving down to OC next Thursday. Call me to set it up.
Thanks, Corey
colorado80439
06-20-2015, 09:01 AM
What 3rd member does it come with?
What 3rd member does it come with?
It doesn’t. It’s a 3 link suspension.
colorado80439
06-20-2015, 10:03 AM
It doesn’t. It’s a 3 link suspension.
?
Anyway do you have that AM Tri-4 link for sale? Just asking since it's listed above your pic.
Thanks
?
Anyway do you have that AM Tri-4 link for sale? Just asking since it's listed above your pic.
Thanks
No it’s installed in my 69.
I’m leaving Phoenix today at noon for Socal. If you want me to bring it to OC call me ASAP. Corey 714-658-6291
I’m moving back to OC from Scottsdale and am clearing out the garage. Make me a reasonable offer.
Ready to sell this $2650 OBO.
Bump for a unicorn. GLWS. I want it bad
Bump for a unicorn. GLWS. I want it bad
Thanks for the bump. Let's work out a deal. 714-658-6291 Corey
Looks like the local “I’ll take it” buyer flaked. Back to the top bump!
chevelletiger
08-25-2015, 01:49 PM
Wow,im really shocked this thing hasnt been bought already.
This was the cats ass awhile ago,i think its better than the quadralink.
Is it really that dated or is it because theres no more customer support?
If you have it still by tax time id want it just to make a jig off it to start making them for sale. Glws the sale friend.
Bump,bump for you.
Wow,im really shocked this thing hasnt been bought already.
This was the cats ass awhile ago,i think its better than the quadralink.
Is it really that dated or is it because theres no more customer support?
If you have it still by tax time id want it just to make a jig off it to start making them for sale. Glws the sale friend.
Bump,bump for you.
Thanks for the bump. I’ve got a couple of people interested back east. I’ve been avoiding shipping. Crating is a PIA. I should know next week if this thing goes to Florida.
Mark Antrim
09-05-2015, 07:51 AM
Wish I was local, im doing a rear suspension swap this winter. Bump for a great deal.
bump...bump...bump....
maybe this is why Lat D went out of business...everyone says they want one....but no one buys one...
Wish I was local, im doing a rear suspension swap this winter. Bump for a great deal.
I’ll ship it if you’re intrested.
Thanks for the bump guys. I can’t believe this hasn’t sold yet. I need it out of my auto transport.
vintageracer
10-01-2015, 09:11 AM
I remember their booth and talking to them at SEMA when they first debuted this setup.
Ready to sell this $2650 OBO.
1nastyZ06
11-11-2015, 05:36 PM
What was the ford 9" housing going to be used for? 48" is really narrow isn't it? Interested if I can make it work.
What was the ford 9" housing going to be used for? 48" is really narrow isn't it? Interested if I can make it work.
48 flange to flange puts you at 53-54 brake rotor to brake rotor. Ideal for mini tubs and a visually appealing deep wheel on a 67-69 Camaro. I believe stock width is 59.5 brake rotor to brake rotor so it’s only a couple of inches more narrow to get a deeper wheel.
What was the ford 9" housing going to be used for? 48" is really narrow isn't it? Interested if I can make it work.
Let’s do this I’ve got a Tranzila to buy. Call 714-658-6291
Update. The housing is 50 inches wide. I had a chance to measure it today.
Sleeper68
02-17-2016, 11:52 AM
I'd love to buy it, I need a roll center adjustment for the rear badly but college + 3 link + required new wheels/tires + coilovers = debt.
DarkoNova
02-17-2016, 01:13 PM
Wow I can't believe this hasn't sold yet!
This was the hot ticket that everybody wanted! I'd have bought this in a heartbeat if I didn't spend money rebuilding my stock rear end. :/
I'd love to buy it, I need a roll center adjustment for the rear badly but college + 3 link + required new wheels/tires + coilovers = debt.
I can take credit card via Pay Pal.:twothumbs
another69
02-17-2016, 07:18 PM
What is the flange to flange measurement?
MangeMD
02-17-2016, 07:53 PM
Update. The housing is 50 inches wide. I had a chance to measure it today.
This. ^^
BlackHD
03-09-2016, 10:26 AM
How does this compare to the ridetech 4-link?
How does this compare to the ridetech 4-link?
The 3 link with watts bar is thought to be a superior set up handling wise. However everyones needs and skills are different. I have one car with the LD 3 link and one car with the Art Morrison 4 link.
Still here...Now located in Orange County.
tom091074
03-27-2017, 11:33 PM
What's the price now?
qnitro
03-28-2017, 07:29 AM
:drool:
What's the price now?
Ready to sell this $2150 OBO.
Ready to sell this $2150 OBO.:seizure:
New price $2,150!!!!
See OG post. Call or text me
Bump! $2,000 $$$$$$$$$$$$$$$$$$$$$
No buyers at this price? Make me an offer...
gcallahan
08-05-2017, 05:45 AM
Guys this is an awesome deal. Somebody needs this. I was considering this suspension or the DSE. Went with the DSE, but really wished I would have gone with the Lateral Dynamics. You really can't beat a watts linkage.
Zl1427
08-05-2017, 12:42 PM
PM sent,
Also need to know how this would work / in a Mini-Tubbed car and the rear ratio.
Thanks Marc
Hey guy’s. Been real busy and haven’t been on here much. I’m moving right now.
It’s just the suspension. No 3rd member or gear ratio. No axles.
Just the suspension/bars/watts link/crossmembers
Please call or text me instead of PM’s. 714-658-6291
Thanks!
Powered by vBulletin®