Speedtech (SW's) LS1 swap 1 3/4" headers

[Mizzouri]

I bought these from Speedtech (they are Stainless Works headers) when I had originally planned to run my stock subframe. I spoke with Blake the other day and he said these would most definitely NOT fit their new 1st gen subframe which is about to come out. The fitment can be seen in my build thread: https://www.pro-touring.com/threads/99675-Mizzouri-s-68-Camaro-build?highlight= and they have maybe 35 minutes of runtime in the shop. Great care was taken while installing/removing them and they are as I received them from Speedtech. From Speedtech's website these retail for $1199.00 plus shipping. Due to low use and condition I'd cut them loose for $700 shipped.

[jeeper90]

What part number are they?
Thanks

[Mizzouri]

I called Speedtech to get a part# and was advised that this header is built to Speedtech's design and not an off the shelf item you'd find at Jegs. Having said that he stated that it will work with the stock steering configuration and a few others. I am using their motor mounts and an Autokraft pan and there is good fitment all around. If you have questions beyond that I would steer you there way since they are vendor (and were very happy to answer questions). Thanks for the inquiry.

Speedtech's part#: 10600

[sginphx]

Mizzouri...I would be interested. Please PM me as I have a couple questions. Thanks, Shane

[Mizzouri]

PM coming

[Mizzouri]

Sale pending......

[Mizzouri]

Sold!