Does anyone know anything about my new car? 67 Camaro Pro Touring

[ProTour2V]

Just picked this up for a killer deal last weekend out of Washington. I believe it was built in longview, Oregon. The guy I bought it off of was no help at all. Luckily, I know a thing or two about cars and was able to tell this was a solid car. Someone has to know something about it. I believe it was done 7 years ago.

https://www.pro-touring.com/attachment.php?attachmentid=111793&stc=1https://www.pro-touring.com/attachment.php?attachmentid=111794&stc=1

[srh3trinity]

Nice car. What suspension, engine and trans? That might help jog somebody's memory.

[ProTour2V]

Detroit speed coilover conversion kit with sway bar, dse minitub kit, dse subframes.

Mildly built 350 with a richmond 5 speed. Vintage air, hydratech hydroboost, baer brakes.....

[cactuss4]

looks great!

[A.I.I.]

Minus the wheel the car is absolutely beautiful. Any interior and engine shots?

[Bonehead]

Don't recall seeing it before. But that's not unusual. We get maybe 4 months out of the year to drive up here. Most stuff that's nice stays in the garage till the rain stops.

[TheJDMan]

Love the car, hate the wheels!

[Josh@Ridetech]

Looks good! It also looks like you can stuff a bigger tire in the rear too.... :)

[ProTour2V]

Sure can. Narrowed moser 12 bolt and dse mini tub kit. I have the wheels in the for sale section. Im going with 18x12 and 18x8 setup.

[bret]

Sure can. Narrowed moser 12 bolt and dse mini tub kit. I have the wheels in the for sale section. Im going with 18x12 and 18x8 setup.

With a Tru Turn front suspension we can get you an 18x9.5 with a 275 tire under that oem frontend with no fender mods at all. 18x10 with minor mods. AND dramatically improve the suspension/steering geometry. http://www.ridetech.com/store/tru-turn/

[paulk68]

With a Tru Turn front suspension we can get you an 18x9.5 with a 275 tire under that oem frontend with no fender mods at all. 18x10 with minor mods. AND dramatically improve the suspension/steering geometry. http://www.ridetech.com/store/tru-turn/

Hey Bret what backspacing would you suggest to accomplish this?

[TheJDMan]

The Forgeline CR3 wheels in Satin Gunmetal would look killer on that car especially in 18x10 and 18x12.

https://static1.pt-content.com/images/noimg.gif

[ProTour2V]

that looks pretty nice. probably going to go with a rated x with brushed and cleared centers.