Post pics of your lowered first gen please

[Death trap]

I couldn't find a thread like this so I'm hoping there isn't one already. Getting ready to order some suspension parts for my 68 firebird and want to make sure I'm getting the parts that will give me the stance I want. If you wouldn't mind posting a pic of you lowered first Gen with a list of suspension parts, wheel/tire sizes would be cool and I guess the motor that's in it might be helpful too. I'm sure I'm not the only one that would find this helpful as well. Thanks in advance everyone, can't wait to see some pics

[67rally]

'67 Camaro with Hotchkis 2" lowering springs/Bilstein shocks in front, Speed Tech tubular UCA/LCA and Hotchkis 1.5" lowering leafs/Bistein's in the rear. I also have a 1/2" lowering block on the rear. 6.0l LQ9 (iron block w/aluminum heads). 245/40/18 & 275/40/18 Nitto 555's.

Side:
https://static1.pt-content.com/images/pt/2014/08/Autocrossx_zps0055da45-1.jpg (http://s228.photobucket.com/user/modi_photos/media/Autocrossx_zps0055da45.jpg.html)

3/4 view:
https://static1.pt-content.com/images/pt/2015/04/Larz20Anderson20Chevy20Day20201420small_-1.jpg (http://s228.photobucket.com/user/modi_photos/media/Larz%20Anderson%20Chevy%20Day%202014%20small_zpssc nhvcmf.jpg.html)

[Death trap]

Nice car, thanks for posting. I didn't think a 2" drop would get down that low. I'm planing about the same set up, ls, 18s... any complaints or any thing you would change or do differently?

[TheJDMan]

You can see a lot of pics in the Project Update section.

[67rally]

Nice car, thanks for posting. I didn't think a 2" drop would get down that low. I'm planing about the same set up, ls, 18s... any complaints or any thing you would change or do differently?

Thanks. Yeah, I just posted this in another thread. I think the Bilstein's are a little harsh over road irregularities. I would probably go with the new adjustable Hotchkis/Fox shocks, but they weren't offered when I did my setup.