350 390HP SBC Long Block, Demon 750 Carb, Snap-on Solus Ultra Scanner

[Olds502]

350 4 bolt main SBC 390HP crate motor purchased from Speed Unlimited in '02, was in my girls 69 Chevelle which is a weekend cruise car. She did not like it, too radical, so we bought a 290hp 350 GM motor for good idle and vacuum, long story short, I kept this for my Camaro but like everyone else, I'm going LS. So up for sale it is!
350 4 bolt block, 10:1 hypereutectic pistons, World Products Sportsman Heads, 292H cam 2200-6000rpm, 230 dur, .465 lift.
Less than 5k over 10 years of car show cruising miles, on an engine stand for the last 3.
$1500
Prefer not to ship but if you arrange it I'll pallet it up.
pictures taken yesterday
https://www.pro-touring.com/attachment.php?attachmentid=111633&stc=1https://www.pro-touring.com/attachment.php?attachmentid=111634&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=111635&stc=1https://www.pro-touring.com/attachment.php?attachmentid=111636&stc=1

Demon 750 double pumper, also been sitting since motor was removed
$200 plus the ride
https://www.pro-touring.com/attachment.php?attachmentid=111637&stc=1https://www.pro-touring.com/attachment.php?attachmentid=111638&stc=1https://www.pro-touring.com/attachment.php?attachmentid=111639&stc=1

Snap on Solus Ultra Scanner, paid for, I own it, so no worries if you get updates.
Domestic and Asian Coverage OBD1 and OBD2 including all the OBD1 adapters and cables up to 2012.
Over 4k new. Asking
$2000
Excellent condition, just trying to finance my project so if this stuff doesn't sell its going in my car!
Thanks for looking!
https://www.pro-touring.com/attachment.php?attachmentid=111640&stc=1https://www.pro-touring.com/attachment.php?attachmentid=111641&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=111642&stc=1https://www.pro-touring.com/attachment.php?attachmentid=111643&stc=1

[aronhk_md]

sent you a PM

[BBBluey]

Hello,

do you still have that 750 Demon for sale?

[Olds502]

Yes sir everything still available.

[Paraman1]

I really wish this was on my side of the country , or I knew someone who was coming across the country with some room to spare :)

[Olds502]

pictures inside motor
111914111915111916111917

[indyjps]

Oops double post

[indyjps]

You sure on the cam specs, 292H is 501 lift. I ran that cam in the past, 355 bow tie heads, comparable to the one youre selling, great running engine for street strip.

Not trying to mess up your thread, just want people to know what their buying. Good price for that engine.

http://www.jegs.com/webapp/wcs/stores/servlet/m20ProductDisplayView?catalogId=10002&langId=-1&productId=29600&storeId=10001

[Olds502]

You sure on the cam specs, 292H is 501 lift. I ran that cam in the past, 355 bow tie heads, comparable to the one youre selling, great running engine for street strip.

Not trying to mess up your thread, just want people to know what their buying. Good price for that engine.

http://www.jegs.com/webapp/wcs/stores/servlet/m20ProductDisplayView?catalogId=10002&langId=-1&productId=29600&storeId=10001


Yes I'm sure, have the cam card, Wolverine Blue Racer cam, card comes with motor. Thanks