1976CamaroGuy
04-16-2015, 04:24 AM
This is a repop header panel, it fit pretty good except for one spot where I had to bring the gap in some at the front where it meets the hood.
You can see that mod in my build thread.
I changed hoods and the gap was larger in that area...so rather than mod this again I just got a new panel.
$75 + shipping
shipping to lower 48 will be around $40-45 depending on where your at.
https://static1.pt-content.com/images/pt/2015/04/2015041420150137_zpsgtcwkot7-1.jpg
https://static1.pt-content.com/images/pt/2015/04/2015041420150145_zps2xlj7ooj-1.jpg
https://static1.pt-content.com/images/pt/2015/04/2015041420150149_zpsnbrnrf2p-1.jpg
area I modded
https://static1.pt-content.com/images/pt/2015/04/2015041420150142_zps32vxjoo0-1.jpg
https://static1.pt-content.com/images/pt/2015/04/2015041420150158_zps3u2dg3gj-1.jpg
You can see that mod in my build thread.
I changed hoods and the gap was larger in that area...so rather than mod this again I just got a new panel.
$75 + shipping
shipping to lower 48 will be around $40-45 depending on where your at.
https://static1.pt-content.com/images/pt/2015/04/2015041420150137_zpsgtcwkot7-1.jpg
https://static1.pt-content.com/images/pt/2015/04/2015041420150145_zps2xlj7ooj-1.jpg
https://static1.pt-content.com/images/pt/2015/04/2015041420150149_zpsnbrnrf2p-1.jpg
area I modded
https://static1.pt-content.com/images/pt/2015/04/2015041420150142_zps32vxjoo0-1.jpg
https://static1.pt-content.com/images/pt/2015/04/2015041420150158_zps3u2dg3gj-1.jpg