BuddyP
01-20-2015, 08:45 PM
EDIT: For photos, click on my build page link in my signature
Front suspension for the budget minded person. Fits 67-69 Camaro or 68-72 Nova. Ran this setup with the Guildstrand mod. For photos click on my build page at the bottom of this post. The components have approx. 3500 miles on them now. If you are only looking to drive your car on the street this setup is great, even if you only plan on a event or two a year (auto-x or road course) this is still a good setup. I am looking to get more involved in tracking the car so am selling this setup to upgrade accordingly.
This consists of the following off my car:
Stock powdercoated upper and lower control arms
Stock Drum style spindles with steering arms, all powdercoated
Global West Del-a-lum bushings for upper and lower control arms
Offset shaft for upper CA mounting
Hotchkis drop springs (3/4 coil cut off)
Note: Comes with set of spring rubbers to change ride height if needed
Hotchkis valved bilstein shocks
MOOG inner and out tie rods (one has a cracked boot, I think I have a replacement)
Aluminum tie rod sleeves
Keep in mind these parts have been mounted and are used, so there is some random marks and scrape or two but still clean and good overall condition.
$900 + shipping
PM for interest or for more info.
Front suspension for the budget minded person. Fits 67-69 Camaro or 68-72 Nova. Ran this setup with the Guildstrand mod. For photos click on my build page at the bottom of this post. The components have approx. 3500 miles on them now. If you are only looking to drive your car on the street this setup is great, even if you only plan on a event or two a year (auto-x or road course) this is still a good setup. I am looking to get more involved in tracking the car so am selling this setup to upgrade accordingly.
This consists of the following off my car:
Stock powdercoated upper and lower control arms
Stock Drum style spindles with steering arms, all powdercoated
Global West Del-a-lum bushings for upper and lower control arms
Offset shaft for upper CA mounting
Hotchkis drop springs (3/4 coil cut off)
Note: Comes with set of spring rubbers to change ride height if needed
Hotchkis valved bilstein shocks
MOOG inner and out tie rods (one has a cracked boot, I think I have a replacement)
Aluminum tie rod sleeves
Keep in mind these parts have been mounted and are used, so there is some random marks and scrape or two but still clean and good overall condition.
$900 + shipping
PM for interest or for more info.