jake72ss
01-02-2015, 10:55 AM
I have an American Powertrain Hydramax hydraulic clutch setup. I had this installed in my Father's chevelle, it worked great, but he could never get used to it. This could be used in other vehicles with only adjusting the length of the pushrod which is threaded. It works with just about any trans other than a T-56 without any extra parts and would work with a t-56 if the extra parts were purchased from American Powertrain. It is a complete kit, It has less than 100 miles on it. The master cyl is a tilton 7/10" bore, this is to only major difference from the standard kit which uses a 3/4" bore. This was done to give it a lighter pedal feel. i believe the hydraulic throwout bearing is a Ram but Im not !00% on that. I stripped the threads in the original firewall bracket, so I purchased a new bracket from American Powertrain. The list price for this kit is 638.00 on their website, I want 350.00 shipped to the lower 48. 931-644-6381 call or text.
https://www.pro-touring.com/attachment.php?attachmentid=107080&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=107080&stc=1