455HO Formula project

[71LS5Formula]

Hello yall. I have a 71 Formula I've been working on between deployments.

As you see the body was hurting. And yes....someone installed TTops at some point

https://static1.pt-content.com/images/pt/2014/12/DSC00222-1.jpg (http://s254.photobucket.com/user/muddy19/media/DSC00222.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/DSC00221-1.jpg (http://s254.photobucket.com/user/muddy19/media/DSC00221.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/DSC00219-1.jpg (http://s254.photobucket.com/user/muddy19/media/DSC00219.jpg.html)

We took it completely apart to do it right.
https://static1.pt-content.com/images/pt/2014/12/0023-1.jpg (http://s254.photobucket.com/user/muddy19/media/0023.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/003-1.jpg (http://s254.photobucket.com/user/muddy19/media/003.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/006-1.jpg (http://s254.photobucket.com/user/muddy19/media/006.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/getattachment1-1.jpg (http://s254.photobucket.com/user/muddy19/media/get-attachment-1.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/getattachment-1.jpg (http://s254.photobucket.com/user/muddy19/media/get-attachment.jpg.html)

https://static1.pt-content.com/images/pt/2014/12/ben022_zps44da7161-1.jpg (http://s254.photobucket.com/user/muddy19/media/ben022_zps44da7161.jpg.html)

https://static1.pt-content.com/images/pt/2014/12/getattachment20-1.jpg (http://s254.photobucket.com/user/muddy19/media/get-attachment-20.jpg.html)

https://static1.pt-content.com/images/pt/2014/12/073-1.jpg (http://s254.photobucket.com/user/muddy19/media/073.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/075-1.jpg (http://s254.photobucket.com/user/muddy19/media/075.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/getattachment41_zps4a002162-1.jpeg (http://s254.photobucket.com/user/muddy19/media/get-attachment-4-1_zps4a002162.jpeg.html)
https://static1.pt-content.com/images/pt/2014/12/009_zps3a1261db-1.jpg (http://s254.photobucket.com/user/muddy19/media/009_zps3a1261db.jpg.html)

TTops Gone!!!
https://static1.pt-content.com/images/pt/2014/12/010_zps62314a8d-1.jpg (http://s254.photobucket.com/user/muddy19/media/010_zps62314a8d.jpg.html)

That is Guards Red
https://static1.pt-content.com/images/pt/2014/12/0012_zps6ec7e8ff-1.jpg (http://s254.photobucket.com/user/muddy19/media/0012_zps6ec7e8ff.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/011_zps3e2e4102-1.jpg (http://s254.photobucket.com/user/muddy19/media/011_zps3e2e4102.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/012_zpsaaed273f-1.jpg (http://s254.photobucket.com/user/muddy19/media/012_zpsaaed273f.jpg.html)

https://static1.pt-content.com/images/pt/2014/12/20140412_135648_zpsa3be3b11-1.jpg (http://s254.photobucket.com/user/muddy19/media/20140412_135648_zpsa3be3b11.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/20140103_170018_zpsbcc8b21c-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20140103_170018_zpsbcc8b21c.jpg.html)


LS1 Fbody Brakes and the Global West suspension is installed.
https://static1.pt-content.com/images/pt/2014/12/20140104_171622_zpsab74d10d-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20140104_171622_zpsab74d10d.jpg.html)

Interior being done. Seats are off getting covered right now. Procar Rally's.
https://static1.pt-content.com/images/pt/2014/12/20140101_190306_LLS_zps4b27104a-1.jpg (http://s254.photobucket.com/user/muddy19/media/20140101_190306_LLS_zps4b27104a.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/20140104_170624_zps40e3820d-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20140104_170624_zps40e3820d.jpg.html)
https://static1.pt-content.com/images/pt/2014/12/20140104_170643_zps32548c52-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20140104_170643_zps32548c52.jpg.html)

And the motor waiting to go to Butler performance.
https://static1.pt-content.com/images/pt/2014/12/IMAG0346-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/IMAG0346.jpg.html)

It's a long project that's taking to long due to deployments, but hey. It's worth it.

[Clutch93]

Good looking bird! Can't wait to see more!

[71LS5Formula]

I appreciate it. She's pretty much gonna be sitting there till at least June without any progress. On another deployment.

[71LS5Formula]

Forgot to list what's goin on with the car.

-455HO
-Short block is going to be prepped by Butler Perfomance. Built loose like the SD455 and bump in CR to 9-9.5.
-HO heads and intake ported.
-FAST EZ EFI
-Custom HR cam by Butler Perf.
-March serpentine belt system
-Built t56 with low 5th and 6th gears.
-3''Aluminum driveshaft
-Built 10 bolt 3.08's or 3.23's. Haven't decided.
-RARE Exhaust manifolds 2.5'' opening.
-Custom 2.5'' exhaust with chambered mufflers.
-LS1 Fbody front and rear brakes
-Global West front and rear suspension, 1''-1.5'' drop, Tubular upper and lowers, Del-a-lum bushings, front sway bar, subframe connectors, and solid body
bushings.
-Koni single adjustables on all four corners.
-Black Leather seats. ProCar Rally front and stock rear(nobody sits back there)
-Currently sitting on 91-91 WS6 rims. Will be getting 17x8's or 17x9.5s up front and 17x9.5's or 17x10's in the rear. Not sure who from or what rim yet.

[saltfuture]

Wow! Pretty impressive metal work. Looks like you started with just a pair of frame rails and replaced everything else!

[Motown 454]

First Thanks you for your service and welcome. Wow Nice work! It looks great. I can't wait to see more.

[lucky13firebird]

Loving the bird, body came out pretty darn good. AND i'm pretty jelous of those neat round port heads. Have been looking for a pair for cheap but just cant seem to find any for an ok price.

[PontiacJim]

The body work is impressive! Looking foreword to watching this build happen over time.
The engine build looks like it will be alot of fun for sure. Can't go wrong with a Pontiac

[71LS5Formula]

Thanks Saltfuture/PontiacJim. Sometimes it feels like that's all I started with, but the guy who did the paint and metal has always done good work. I knew it come out good, but he surpassed my expectations. I let him know that all the time. While he had it he opened the wheel well with a bfh and trimmed the lip to accommodate wider wheels.

Motown454. Thank you for the support. I went down to the recruiters office a couple days after 911. Felt like I had/have to do something for Merica to pay back all the freedoms we get. You're not the only on that can't wait to see more. Talked to the lady doing my seats and she said the bottoms were about done. So that's cool. She does awesome work. Whenever I get pics of the seats I post them up.

Lucky13firebird. I lucked out with these round port heads. They're from a 71. Got the 2 piece aluminum intake for the 71 too. I maybe able to help you find a set of round port heads. If interested, shoot me a pm with the price range and casting number you're looking for and I'll contact some people.

[71LS5Formula]

I know it's been awhile, but I got to go home on leave back in late April. Got a few things done.

The motor is in there, but not everything. The front is still sitting high cause they are new springs, so they need to settle.
https://static1.pt-content.com/images/pt/2015/05/20150429_122331_zpsa3d1081b-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20150429_122331_zpsa3d1081b.jpg.html)
https://static1.pt-content.com/images/pt/2015/05/20150429_122305_zpsbc92511f-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20150429_122305_zpsbc92511f.jpg.html)

Finally got the column back. Looks great. I miss judged the horn button sticker. Whoopsie. That's an original/unrestored steering wheel. I think it gives the car some character.
https://static1.pt-content.com/images/pt/2015/05/20150509_124028_zps4952c67a-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20150509_124028_zps4952c67a.jpg.html)
https://static1.pt-content.com/images/pt/2015/05/20150509_124009_zps2aeec3b1-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20150509_124009_zps2aeec3b1.jpg.html)

[71LS5Formula]

I was goin to go with the Stealth design Pro Wheels, but they don't offer the size I want. Gonna go with Torque Thrust 2's.

[keepat]

Great looking Pontiac! Color is awesome!
Welcome back and good luck with your build!
Thank you for your service!
Pat

[andrewb70]

...Gonna go with Torque Thrust 2's.

Please don't...surely something else would look really nice. How about these?

http://www.vintagewheelworks.com/products/wheels/v48

Andrew

[NOT A TA]

Not sure why Andrew doesn't want you to get TT II's. Although the V 48's would probably look good also, I think TT II's can look really nice on a 70-73 bird because they go well with the rounded lines of the early 2nd gens.

https://static1.pt-content.com/images/pt/2010/07/14less005-1.jpg (http://s240.photobucket.com/user/NOTATA/media/Firebird/14less005.jpg.html)

[71LS5Formula]

Those vintage V48's do look nice, but I don't think they'd look right on the car.

[yellow1098Greg]

Quick question about the short block....did you have your own block and send it in to get assembled and prepped by butler? Or did you just buy a short black from them and the rotating assembly? And which ever you did what did it run you? Thank you! Get looking car!

[lucky13firebird]

Torque thrust 2's aren't a bad look on those cars... looking forward to the progress when you get back.

[CampbellshotrodsAZ]

Sharp looking car! Looking forward to seeing the end result!

[Later-A-body]

I agree with Andrew. Skip the TT II's. The Year One 17" Honeycombs would look better or the VWW wheels suggested.

[PonchoJohn]

I vote for the US Mag Trans Am rims, or their Bandit wheels, or Year One's Honeycombs... LOL- like it's my money ;)
This link shows both of the US Mag wheels... http://transamcountry.com/community/index.php?topic=67983.0
https://static1.pt-content.com/images/noimg.gif

[PonchoJohn]

https://static1.pt-content.com/images/noimg.gif

[1965gp]

The car is looking great- what is the color if you don't mind me asking?

[Buryingthesun]

Such a beautiful car

[71LS5Formula]

Quick question about the short block....did you have your own block and send it in to get assembled and prepped by butler? Or did you just buy a short black from them and the rotating assembly? And which ever you did what did it run you? Thank you! Get looking car!

The shortblock in the pic turned out to be bad. Has a crack on the drivers side across the freeze plugs. The shortblock I put in was from my uncle. It's an original that was
running. I checked the bore on it and it's still factory bore. 4.15. He pulled it out of his car cause it drank fuel like was it was going out of style and it leaked oil.
The dipstick was not installed right. I got that one free. Traded a Pontiac 350 for it. Whenever I go to put a new shortblock in it I'll be getting something from Butlers. Great
guys up there. They're working on my HO heads right now. Their new shop is awesome.

I've never really been a fan of the Honeycomb rims. Something about them turns me off about them. I'm not sure about the US Mags either. They nice, but I'm not sure they'd give the
stance attitude I'm looking for. 17x9.5's up front and 17x11's rear.

The car is 1999 Porsche Guards Red. The brightest red you can get.

I appreciate it too all. I can't wait to get it done.

[71LS5Formula]

Found the pair of torque thrust 2's I bought for my 3rd Gen a few years ago in my attic. Forgot they were there, so I dragged them down. 17x11s. Thought they had a 6 1/2 inch backspacing and need 6 inch to fit. Looked them over and the sticker is still on them telling the info on them. 6 1/4. So I need to come up with a little space and they'll go on just right. The rotor is not installed, so it should be real close when done. The leaf spring to the rim is right at 3/8s gap. Same with the shock. The other spot may need a little trim, but we shall see when I get there. Otherwise I'll back it down to 9 1/2s all the way around.

https://static1.pt-content.com/images/pt/2015/06/20150618_191416_zps78926ddd-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20150618_191416_zps78926ddd.jpg.html)
https://static1.pt-content.com/images/pt/2015/06/20150617_180708_zpsb4c9fec4-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20150617_180708_zpsb4c9fec4.jpg.html)
https://static1.pt-content.com/images/pt/2015/06/20150617_180701_zps3841d893-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20150617_180701_zps3841d893.jpg.html)
https://static1.pt-content.com/images/pt/2015/06/20150617_180620_zpsf1ea1133-1.jpg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20150617_180620_zpsf1ea1133.jpg.html)


I'll have more updates when I get moved to Montana.

[cdoggy81]

Looks great!

[71LS5Formula]

Thanks. Got a little ways to go before it's done.

[71LS5Formula]

Gonna be a no go with 17x11s on the back. Sick out too far so it ruins the looks. Gonna stick with 17x9.5s on all 4 corners, so these 17x11s will be going up for sale soon.

[71LS5Formula]

Well. I got the March pulley kit for my car. The 13105-08. Parts look great. Instructions are difficult/challenging even with the pictures and the pics are kinda vague to understand. So I kinda " winged it " and guessed. I only needed the kit for the alternator and power steering. Got it mostly done today, but ran into a big snag. The instructions have 2 ways to run the belt depending on how you route it. If you're running a fan off the water pump you need a 66 inch belt and 69 inch belt if not. Well I'm running a fan off the water pump. So I get a 66 inch belt. Doesn't fit. Belt is too long. So I've been back and forth to the parts stores trying to find a belt most of the day. Gonna be looking again tomorrow for a belt. Hopefully I can find. So far I'm not happy with anything but the looks of the parts. I'm not even sure the alt is lining up with the rest of the pulleys.

[RMMiller]

Man I love the small back window F Bodies! Sure glad you saved that car, it turned out beautiful. If I were to guess, I think the resistance to the Torque Thrust has more to do with popularity than looks. Kind of like my hatred for Flowmaster mufflers, love the sound but it seems every car on the road is running them.

[71LS5Formula]

Man I love the small back window F Bodies! Sure glad you saved that car, it turned out beautiful. If I were to guess, I think the resistance to the Torque Thrust has more to do with popularity than looks. Kind of like my hatred for Flowmaster mufflers, love the sound but it seems every car on the road is running them.

I like them better too. The pictures don't do it justice. I think you're right about the torque thrust rims . I think they'll look great on the car. I hate flowmasters. They do sounds nice on some cars, but I won't be putting them on. I've gota custom setup that'll make the car sound wicked, but still have the old school sound.

[71LS5Formula]

Well. I got the March pulley kit for my car. The 13105-08. Parts look great. Instructions are difficult/challenging even with the pictures and the pics are kinda vague to understand. So I kinda " winged it " and guessed. I only needed the kit for the alternator and power steering. Got it mostly done today, but ran into a big snag. The instructions have 2 ways to run the belt depending on how you route it. If you're running a fan off the water pump you need a 66 inch belt and 69 inch belt if not. Well I'm running a fan off the water pump. So I get a 66 inch belt. Doesn't fit. Belt is too long. So I've been back and forth to the parts stores trying to find a belt most of the day. Gonna be looking again tomorrow for a belt. Hopefully I can find. So far I'm not happy with anything but the looks of the parts. I'm not even sure the alt is lining up with the rest of the pulleys.

Found a belt. Went to a 65 inch belt. Still not impressed. There's not really a way to tighten the belt. The idler pulley has an adjustment and the alt has an adjustment. Had to adjust the idler to where I thought the belt would be tight. Force the belt on the idler. The rod that's "suppose" to tighten the belt doesn't really tighten the belt. Also with the movement of the power steering pump. Need to a different pressure hose. Hopefully I can make the low side work. Also noticed that there's an extra bolt that instructions don't really tell me where it goes. Think I would've been better sticking with the original stuff.

[rohrt]

subscribing

[71LS5Formula]

Sorry for the delay. I do have updates on the pulley setup. It'll be over the weekend that I get pics and info loaded. Standby for the exciting conclusion of the pulley kit shenanigans.

[cdoggy81]

Cant wait to hear this one... March is the worst to deal with. Not sure if it is just Pontiac based kits or what but they just haven't figured it out. O had 2 friend go through the same thing that you are experiencing :( Hope it turned out well for you in the end.
I sure hope their LS stuff is better too!

[71LS5Formula]

Ok. Here we go. Called March to get it figured out. Help was great. Think his name was Doug. We went through it and come to find out the instructions are for the old design. Once we figured that out. It's good now. The the extra bolt I had went into the back of the pump where the stud was. The belt routing used now is for the 69 inch belt setup. One the belt is installed the idler is adjusted so the belt is snug. Then the alternator is used to tighten the belt. Now for the power steering hoses. I had to use a 90 degree fitting right off the gear box and run it a little different for the low pressure side. The high pressure side I had to get a 45 degree fitting off the gearbox and a 90 off the pump. Everything seems to be back on track for the bird.
https://static1.pt-content.com/images/pt/2015/11/20151121_154254_zpskjwiceed-1.jpeg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20151121_154254_zpskjwiceed.jpeg.html) https://static1.pt-content.com/images/pt/2015/11/20151121_154308_zpsvaqeerwf-1.jpeg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20151121_154308_zpsvaqeerwf.jpeg.html)

[71LS5Formula]

I do have updates to the car, but it'll be this weekend before I get the pics and info up.

[cdoggy81]

Nice, looking forward to seeing them :)

[71LS5Formula]

Sorry for the long delay. Lot's going on here. So here goes.

Finally got the brakes done and while I was bleeding them I wasn't getting any pressure to the rear even though I was getting fluid. Took the master back off and set it level. Lot's of air in the back half of the cylinder. Once the air was gone. What a difference.

I rebuilt the trans. Ran into a bunch of problems with that. First it was during assembly that the two shift pins broke as I was putting them back in. That was fun getting the trans taken back apart to remove them for new. Went to put the tail housing on and remembered that I still needed to add the location for the speed sensor, so material was added and a the hole was machined. Then went to put the tail housing on again and notice the bearing was gone. Went to get another, but it was discontinued across the board. Found a bearing that does the job and machined it out to fit. Trans is finally back together. Won't go it until I get the clutch kit.
https://static1.pt-content.com/images/pt/2017/01/20170124_194138_zpselacfnsy-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170124_194138_zpselacfnsy.jpg.html)

Had the dash bezel restored. Looks awesome! Nothing more that can be said about it.
https://static1.pt-content.com/images/pt/2017/01/20170124_190621_zps2oroocvw-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170124_190621_zps2oroocvw.jpg.html)
Got my front seats finished up. Look and feel great! Can't wait to actually sit in it while driving instead of a temp gaming chair.
https://static1.pt-content.com/images/pt/2017/01/20170124_190846_zpsgjvdnlui-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170124_190846_zpsgjvdnlui.jpg.html)

Everything is slow right now due to funds and snow on the ground here in Great Falls, Mt, but the next projects are what wheels, fuel system, cooling system, and diff. That'll be a little bit though.

[71LS5Formula]

I forgot to add. I figured out why the nose is still high. The front springs are wrong,so I ordered the correct ones and they'll go in one the trans is back in.

[71LS5Formula]

The Summit Racing fairy showed up to my house today and left me something.
https://static1.pt-content.com/images/pt/2017/02/20170223_183720_zps1ydy2hmh-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170223_183720_zps1ydy2hmh.jpg.html)https://static1.pt-content.com/images/pt/2017/02/20170223_185331_zpsa45psyyv-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170223_185331_zpsa45psyyv.jpg.html)

[71LS5Formula]

Been a few days since I last updated. Got off work early today, so I got a few things done. Finally got the rear seat done. That was a fun chore to get them covered and installed, but they look good. Not a big empty spot anymore. Got the dash panel installed with the trim rings too. Looks awesome. Also spent most of the afternoon getting the left front spring swapped out. Tomorrow I'll be getting the other side done. Got the trans installed last weekend. I'll probably be ordering the rims sometime next week. Might even have electrical about done too, but that is the most dreaded part of a restoration.
https://static1.pt-content.com/images/pt/2017/03/20170301_184928_zpsnapsnb5w-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170301_184928_zpsnapsnb5w.jpg.html)
https://static1.pt-content.com/images/pt/2017/03/20170305_191630_zpsdjlgdvfz-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170305_191630_zpsdjlgdvfz.jpg.html)
https://static1.pt-content.com/images/pt/2017/03/20170303_195700_zps94ylooep-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170303_195700_zps94ylooep.jpg.html)

[71LS5Formula]

Teaser pic till tomorrow.
https://static1.pt-content.com/images/pt/2017/03/20170317_132819_zpsaxolo2w0-1.jpeg (http://s254.photobucket.com/user/muddy19/media/Mobile%20Uploads/20170317_132819_zpsaxolo2w0.jpeg.html)

[birdsandbowties]

are you going to paint the parking brake arm ? lolo

[71LS5Formula]

Nah. There are several things that have been left original and unrestored. Keeps some of the nostalgia feel to it.

[71LS5Formula]

Finally back on the ground and ended up sitting perfect. Wheel gaps are great. The rims really stand out on the car. 17x9.5's. with 275/40/17 all the way around.
https://static1.pt-content.com/images/pt/2017/03/20170318_161914_RichtoneHDR_zpsvxzqb3j9-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170318_161914_RichtoneHDR_zpsvxzqb3j9.jpg.html)
https://static1.pt-content.com/images/pt/2017/03/20170318_182457_zpsuk90w8th-1.jpg (http://s254.photobucket.com/user/muddy19/media/20170318_182457_zpsuk90w8th.jpg.html)

[rreichert82]

So I am swapping a T56 into my 78 and having an issue figuring out tunnel mods and output shaft angle. You have any pictures showing what you had to do to make that work. Yours looks pretty clean on the inside.

[71LS5Formula]

I didn't do any tunnel mods. I have a t56 with the viper tail housing on it, so it put the shifter in the stock location. My bell housing kit came from Weir Hotrod, but there are other companies make one now. For the output angle I kept motor sitting at the stock angles, so I should be where I need to. Thank you. Today I'm gonna roll it out of the garage again an really clean the interior up. It needs it. Probably put the driver seat in it, but it makes such a great game chair to play video games! Decisions, decisions.

[71LS5Formula]

Hello to everyone. I know it's been awhile for me to update my car. I got the exhaust done on the car. Very similar to the optional 69 Z/28 exhaust system. Sounds really good and dirty. Might put a pair of resonator's on it to tone it down from the drone that it has. Here's some pics of the system.
https://drive.google.com/file/d/1GOE358EF-REfrsAga_3ZpwgnhJZckIjR/view?usp=sharing

https://drive.google.com/file/d/11aKxwtPPnji1-ylbx8a4L5gyiLOiD5TY/view?usp=sharing

https://drive.google.com/file/d/1RO2Bl6QoYJ6sWntQCi4BQDiegXyUBOIV/view?usp=sharing

https://drive.google.com/file/d/1PQlTRNwthLVaISVHdU8pcTgInvZLJS7K/view?usp=sharing

https://drive.google.com/file/d/1WYiii25xUPdMeiEUiAgla0DaKfzqWf2z/view?usp=sharing


I have been driving the car around town and enjoying the car. Converted the car to EFI with FiTech. Was working on tuning the timing control before I deployed. Converted the HEI to be able to be controlled by the FiTech. Works really good. I think I advance the timing a little much, so when I get back I'll be starting back at 0 on the timing.

https://drive.google.com/file/d/1CwF6Emly50KaqE8u8HkHNkQknLCzgPQc/view?usp=sharing

[71LS5Formula]

Let's try this again.

https://photos.app.goo.gl/gXkUIPOmJaXMTqIK2

https://photos.app.goo.gl/kUpJvub87TQ8X12E2

https://photos.app.goo.gl/z7prMSJfzcNyNSat2

https://photos.app.goo.gl/QN5babvrPId3shKz2

https://photos.app.goo.gl/wwda10Q631Reb6TU2


https://photos.app.goo.gl/B7Y6iy5DmCenucy42