67-9 camaro 17" torque thrust/nto5 mini tubbed wheels/tires

[alnoe]

Full set of 17" torque thrust 2's with nitto nto5 tires for dse mini tubbed stock width rearend 67-9 camaro or firebird. 17x8 fronts with 255/40/17. 17x11 rears with 315/35/17 tires. Tires have about 1/3-1/2 tread. Wheels are in good shape. Could use repolishing. Approximately $2k new. Asking $1,000 plus shipping. Prefer local pickup but can ship at buyers expense. May trade for full floater 9" stock width rearend.

[alnoe]

I have had several pms on the rearend width. I purchased a stock width currie 9" many years ago and that was in the car prior to and after mini tubbing. I will measure the exact width and post up this weekend. Al

[alnoe]

The rear ended measures 60 1/2" from the mounting face to the mounting face of the Baer rotors. In other words, I removed the wheels and used two straight edges across the rotor flanges where the wheels bolt up. Any ?? Let me know

Thanks
Al

[alnoe]

The front wheels are 17X8 with 4 3/4" Backspacing. Rears are 17X11 with 7 3/4" backspacing (4 3/4" of original wheels plus 3" wider wheel=7 3/4". Bolt pattern is standard GM 5 on 43/4. Any questions, let me know.

Edit-thanks for the catch on my earlier post. My hands did not type what I was thinking!!

Thanks
Al

[Z06vet]

That rear end width & rear back space measurement doesnt seem right. I would think the backspace on the 11" rear would have to be around 7" or the wheel would be sticking out of the wheelwell. Might want to re-check that so you dont run off any potential buyers. Great price on this setup. Scott

[alnoe]

Z06 vet-you are 100% correct. Don't know what I was thinking! I edited the measurements-thanks for the catch!

[alnoe]

SOLD!!! Thanks pro-touring.com!!!

[LXCam]

Just wanted to say thanks to Al for the smoking deal. Everything arrived today safe and sound and it was a fantastic experience all the way around. I happen to be a vendor on a couple of other sites and I can't say enough good things about this purchase. Everything was better then advertised and went very smoothly, a great guy to deal with!.