PDA

View Full Version : Another rusty C10 build



slowcpe
11-24-2014, 08:06 PM
I'm pretty active on 67-72chevytrucks but like the performance oriented tech side of this board. While I've been lurking on this site for a while so I guess its time to share my build for those who care. Its not going to be a nice as a lot of rides I see on here, but should be a fun truck to drive. I will warn you I'm very slow on progress and change my mind with the wind. Well here goes:

Currently:

Truck: 1967 C10 Short Stepper
Drivetrain: 250 I-6/3-spd manual
Suspension: Drop Spindles, Rear Drop Springs and Blocks, Front cut stock springs
Brakes/Rearend: 1972 5-lug, front discs, factory 12-bolt
Body: Red and Rust

Winter 2014 Plans:

Drivetrain: 50k mile LQ4/4L80e w/cam, stall and supporting mods
Suspension: Porterbuilt Stage 1 Front and Stage 2 Rear Air Ride
Rearend: Posi Unit and new gears (more than likely 3.73s)
Body: Stick with Red and Rust and add my Grandpa's old trucking company logo on the doors
Fuel: Boyd Welding tank under the bed
Cooling: 4-Core Big Block Truck Radiator w/Electric Fan
Interior: Recover Buddy Buckets, High Hump Trans Tunnel

Still need:
Air Management (more than likely Accuair e-Level)
Gauges (leaning towards Dakota Digital VHX)
Stall, valvetrain upgrades, oil pan, and headers
Rearend components
No Limit Swaybars (definite front, maybe rear)
Swap KYB shocks for Ridetech HQs (if budget allows)

Future (we will see if any of this happens)
Porterbuilt front Dropmember, Rack and Pinion, and Control Arms
Wilwood 4-wheel Disc Brakes
Billet Wheels
Turbo
Paint and Body

Well on to some pics:

What the truck looks like now:
https://static1.pt-content.com/images/pt/2014/11/14369539516_0130bf2275_z-1.jpg

https://static1.pt-content.com/images/pt/2014/11/14197520981_c09e32ed56_z-1.jpg

https://static1.pt-content.com/images/pt/2014/11/13789663015_9fac26883a_z-1.jpg

slowcpe
11-24-2014, 08:12 PM
Parts laying in the garage awaiting install:

https://static1.pt-content.com/images/pt/2014/11/12229553974_4f173cbdb0_z-1.jpg

https://static1.pt-content.com/images/pt/2014/11/12105911704_35eba53813_z-1.jpg

https://static1.pt-content.com/images/pt/2014/11/15756364811_0593bc8bb1_z-1.jpg

https://static1.pt-content.com/images/pt/2014/11/15153711763_c479dac9dd_z-1.jpg

Yelcamino
11-25-2014, 04:24 AM
Nice truck! It looks like you're on your way to having a fun ride!

bovey
11-25-2014, 08:34 AM
Cool. Couple of things.

1) I use the Ridetech HQs and love them.

2) For the amount of effort you are going through, buy proper springs.

Otherwise, have at it. Your gonna love LS power.

bovey

slowcpe
11-25-2014, 09:16 AM
Thanks all.

I've already got Air Lift Dominator 2600 air bags, they came with my Porterbuilt kit. Most C10 guys run them and really like them.

slowcpe
01-27-2015, 12:20 PM
A few updates. I move at a snails pace due to little time out in the garage and I'm pretty green to most of the work being performed. I'm definitely not scared to learn and enjoying the process.

Tore the truck apart:

https://static1.pt-content.com/images/pt/2015/01/15891391766_9afaac8684_z-1.jpg

https://static1.pt-content.com/images/pt/2015/01/15889951239_9475268e33_z-1.jpg

https://static1.pt-content.com/images/pt/2015/01/16187365807_08742ee9e2_z-1.jpg

slowcpe
01-27-2015, 12:25 PM
Started mocking up the rear suspension:

Before

https://static1.pt-content.com/images/pt/2015/01/15753251773_58249cb649_z-1.jpg

Porterbuilt rear frame crossmembers installed and layed out the tank and air compressor mount

https://static1.pt-content.com/images/pt/2015/01/15750801004_64d7b44294_z-1.jpg

C-notches installed

https://static1.pt-content.com/images/pt/2015/01/15753250513_9342005f07_z-1.jpg

Current look of the back of the truck

https://static1.pt-content.com/images/pt/2015/01/16371121891_627726355c_z-1.jpg

slowcpe
01-27-2015, 12:30 PM
I've still be doing a lot of reading, making decisions, and collecting parts. I picked up all of my valvetrain, currently leaning towards swapping the 317s for a set of 799/243s, and changing cams to either a BTR Stage 3 or 4 cam. I also bit the bullet and ordered a Porterbuilt Mild Front Dropmember, Tubular Control Arms, and Rack & Pinion steering kit. Should be here in the next 7-9 weeks.

Shot of valvetrain stuff (boring pic)

https://static1.pt-content.com/images/pt/2015/01/16371514091_02ee204a0d_z-1.jpg

Also picked up a cool vintage cooler for throwing in the back of the truck

https://static1.pt-content.com/images/pt/2015/01/16266119952_3f68c55340_z-1.jpg

Tig
01-28-2015, 06:03 PM
Awesome build on an awesome truck.

Lookin forward to your updates

mooseknuckles
04-02-2015, 01:51 PM
lookin' good!

joemac
04-02-2015, 05:41 PM
Subbed

slowcpe
08-26-2015, 03:09 PM
Well summer is starting to wind down and its almost time to get back to working on the truck. Been collecting parts, but unfortunately still have more to acquire. Next on the list is as follows: T56, Brakes, Air Management, RT HQ Shocks. That should hopefully conclude the chassis.

Some goodies sitting in the garage waiting to go on the truck:

Full Porterbuilt Level 1 front end with R&P and control arms

https://static1.pt-content.com/images/pt/2015/08/20722082508_4dfa97b428_c-1.jpg

Porterbuilt tubular trailing arms and longer trac-bar

https://static1.pt-content.com/images/pt/2015/08/20722003750_b6d62a417b_c-1.jpg

243 heads. Going to clean these up a bit, mill, and install my BTR valvtrain

https://static1.pt-content.com/images/pt/2015/08/20287452514_ce7a227de2_z-1.jpg

TAT
09-10-2015, 12:36 AM
Can't wait for the updates! Looking good.

RBEAST
09-17-2015, 04:38 PM
thats gonna be a nice truck when you finish it up!

slowcpe
09-25-2015, 12:52 PM
Well been doing a little bit of work and a whole lot of spending money.

Got the engine and transmission out of the corner of the garage. Engine is on the stand, halfway torn apart, and the transmission is with its new owner.

https://static1.pt-content.com/images/pt/2015/09/21525452549_4d64b6b273_z-1.jpg

I sold the 4L80e to make room for this guy: T56 Magnum

https://static1.pt-content.com/images/pt/2015/09/21524469158_ef3ca23276_z-1.jpg

Drove up to Jasper the other day and picked up these beauties

https://static1.pt-content.com/images/pt/2015/09/21524875149_194f178235_z-1.jpg

And Summit delivered this along with a new oil pan gasket

https://static1.pt-content.com/images/pt/2015/09/21720970381_73772148ce_z-1.jpg

The boat goes in storage in two weeks and then its hopefully time to really start making headway on the chassis.

T_Raven
09-25-2015, 07:12 PM
Nice truck. It's got good patina. You've got some sweet parts going on it.

dpruden
10-05-2015, 12:50 PM
I see you are in Evansville, thats awesome! I am back here after 6 years Navy and 3.5 years in the oil and gas industry. Let me know if you ever need a hand, I am trying to get funds together for my next build, so nothing at the moment. Give me a call if you need anything 337-322-4272

2ndroundko
10-07-2015, 03:56 PM
love the patina. the look works really well as long as the panels are all the same color. Nice plan and collection of parts. should come together nicely I'll be watching this one.

slowcpe
12-30-2015, 11:24 AM
Well I'll post up a quick update. Things move very slow in my world as there never seems to be enough time to do it all. Pulled everything off the front and started working on the front dropmember. I've got half of that installed right now. I also went ahead and ordered the Porterbuilt Inner Frame Stiffener. Well it arrived yesterday. Now I hope to make some major headway as I've got everything I need to mock up the chassis.

[https://static1.pt-content.com/images/pt/2015/12/24069036085_d6c8a22ff4_z-1.jpg

Slick68
12-31-2015, 07:14 PM
I'm officially jealous! lol Looks like a fun project.

Auto Rod Technologies
12-31-2015, 08:13 PM
Nice project, and porterbuilt makes some nice stuff.

slowcpe
02-28-2016, 05:33 PM
Very slow process but I've got most of the front end mocked up. I'd be ready for brakes if I had a better ball joint press.

124559

69_Chevy_C10
08-28-2017, 07:00 PM
I am building a 69 1/2 ton short bed right now. I have a porterbuilt inner frame stiffener installed currently. Have you installed your LS/T56 in the truck yet with the frame stiffener? If so, did you have to clearance the stiffener to get it to fit? My stiffener is a bit beefier in the top bracket area. I bought mine in 2014. Not sure if this is something that Porterbuilt is doing now to provide more clearance for larger transmission installs. Man, any help you can give me with knowledge here will really help. I am close to pulling the trigger on an LS3/T56 powerplant combo. I really like what you are doing with your project. Good Luck with it!!

slowcpe
09-11-2017, 02:26 PM
I am building a 69 1/2 ton short bed right now. I have a porterbuilt inner frame stiffener installed currently. Have you installed your LS/T56 in the truck yet with the frame stiffener? If so, did you have to clearance the stiffener to get it to fit? My stiffener is a bit beefier in the top bracket area. I bought mine in 2014. Not sure if this is something that Porterbuilt is doing now to provide more clearance for larger transmission installs. Man, any help you can give me with knowledge here will really help. I am close to pulling the trigger on an LS3/T56 powerplant combo. I really like what you are doing with your project. Good Luck with it!!

Honestly I haven't gotten to that point yet. This project is moving at a very slow pace. lol. Once I get my front brakes installed then I'm going to install the motor/trans. Porterbuilt does know what trans I'm using and they never mention any issues.

slowcpe
09-11-2017, 02:30 PM
Since I'm in here and posting I might as well give a bit of an update.

Most of the chassis is assembled and front suspension installed. I need to order my front brakes so I can wrap up the front end and install the engine/trans. I also decided I'm going to box in part of the rear frame by the upper shock crossmember. Since the weather is getting cooler and my other hobbies are in good places, I hope to make some real progress this winter.

https://static1.pt-content.com/images/pt/2017/09/37003103762_834ebb6223_z-1.jpg

https://static1.pt-content.com/images/pt/2017/09/37174872865_cb0b2f3ffa_z-1.jpg