Anvil 2nd Gen Camaro blems at big discounts [Archive]

hotwheels

11-11-2014, 07:55 PM

We have two gloss finish power bulge hoods that are carbon top, fiberglass bottom blems. The only thing wrong with one of them is that the carbon fiber weave is a little less than perfect on the corner of the bulge on both sides. Other than that, it's a very nice hood. That one is on sale for $550. The other one has the same problem, but also has a slight haze to the surface which is only noticeable in the right light. That one is $395. Normal retail on these is $995.

https://www.pro-touring.com/attachment.php?attachmentid=105125&stc=1https://www.pro-touring.com/attachment.php?attachmentid=105126&stc=1https://www.pro-touring.com/attachment.php?attachmentid=105127&stc=1

aronhk_md

11-11-2014, 08:45 PM

now if only they were early 2nd gen formula hoods............sigh

71maroesteban

11-11-2014, 09:32 PM

For the one that is 550 is that shipped?

Steve N 69 69 69

11-12-2014, 02:02 AM

I would buy either today, but I'm working in Shanghai till next year. Maybe I'll have a buddy pick one up.

g-machine

11-12-2014, 03:38 AM

PM sent

hotwheels

11-12-2014, 05:38 PM

I would buy either today, but I'm working in Shanghai till next year. Maybe I'll have a buddy pick one up.

Hey Steve, I wanted to see if we could use your car for some test fitting a month ago, but I couldn't find your number. Hope all is well with you! What's happening in Shanghai? All good, I hope! Look me up when you're back, maybe we will have some parts you could use.

Cheers, Matt

hotwheels

11-12-2014, 05:40 PM

Both hoods sold in less than 24 hours! Luckily, we have a few more 2nd gen hoods, but I'll have to take some pictures.

Steve N 69 69 69

11-12-2014, 06:39 PM

Wow, that was fast. I should have jumped on it.
I'm here managing the fabrication and soon the installation of themed scenery for large section of the new Shanghai Disney Resort. I've been here for one year today, probably another 10 months or so to go. Good news for the bank account, bad news for car building at the moment. Sorry I couldn't help you out with the car, its up on jack stands at the shop. Ill be in touch when I get back, all the projects will be getting finished finally.

badazz81z28

11-12-2014, 06:55 PM

Both hoods sold in less than 24 hours! Luckily, we have a few more 2nd gen hoods, but I'll have to take some pictures.

Flat hoods?

kirt70camaro

11-13-2014, 05:45 AM

How tall are they? I haves 4 in cowl now to clear the throttle body. What do they weigh.

Bygblok

11-13-2014, 06:48 AM

These are pin on and not the bolt on's?

g-machine

11-13-2014, 07:17 AM

They look like bolt-on. The internal framing is here and the boards shown are bolted into the hinge bolt holes.

hotwheels

11-13-2014, 08:11 AM

Our power bulge hoods add about an additional 2 1/2 inches of celarance over a stock steel hood and weigh anywhere between 1/3 to 1/4 of the weight of a steel hood.
All Anvil hoods are bolt on like factory hoods and use stock or aftermarket hinges and latches.
We have a couple of flat hood blems, but I think they may have some cracks that need some repair. The good news is you can save a lot of money. I'll try to get some pics posted as well as some pics of some other power bulge hoods we have as blems.

hotwheels

11-13-2014, 12:34 PM

dipren443

11-13-2014, 12:38 PM

Here is one more 2nd gen power bulge hood blem.
This is a satin finish 100% carbon hood that has some weave imperfections and a few minor scratches. We're asking $750 + shipping, normally goes for $1,950.
https://www.pro-touring.com/attachment.php?attachmentid=105175&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=105174&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=105176&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=105177&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=105178&stc=1

PM Sent. I am all over this!

Its all mine!

vdaviemusclecars

11-14-2014, 10:06 AM

Any left?

Vince

hotwheels

11-15-2014, 04:06 PM

We have a couple more power bulge hood blems left and one of two flat hood blems have been spoken for. I'll know more by the end of the week and will post more pictures.

hotwheels

11-25-2014, 08:03 PM

Here's another 100% carbon fiber power bulge hood. Glossy on top, satin on the bottom. It's light (about 23.5 lbs.) and the only problem with it is that it has some hazy spots on the top side. The underside is really nice, so it would be a good candidate for painting the top side and leaving the underside satin carbon. This one is $750 (regular price is $1950). This is a killer hood for a killer deal for anyone who wants to put their second gen on a diet and lift the hood for a lot of oohs and aahs.

105727
105728
105729

Bygblok

11-25-2014, 09:43 PM

PM sent.......

Shotaro

02-11-2019, 06:52 PM

still for sale? It is impossible to say so.

Tpichevy

02-11-2019, 09:14 PM

2014....

badazz81z28

02-11-2019, 09:20 PM

2014....

Let’s see some 2018 blems

7firebird1

02-12-2019, 02:38 AM

Do you have any 71 Firebird blems? I have your but am in need of a nose.

dhutton

02-12-2019, 05:53 AM

Call them and ask them....

7firebird1

02-12-2019, 06:25 AM

Meant to say good...lol.

72 matte gold

02-15-2019, 03:43 PM

Any hoods left

badazz81z28

11-28-2019, 03:01 PM

Any more Hoods?!?!?

Tpichevy

11-28-2019, 10:02 PM

Yes im also wondering this

John McIntire

11-29-2019, 05:19 AM

Try emailing this guy Storm. I bought my parts from him originally and check in with him from time to time looking for first gen blems. He's usually pretty quick to respond.

[email protected]

72 matte gold

11-30-2019, 04:58 AM

Try emailing this guy Storm. I bought my parts from him originally and check in with him from time to time looking for first gen blems. He's usually pretty quick to respond.

[email protected]

What blend do you have

John McIntire

11-30-2019, 10:58 AM

I bought the front lower valence with the 69 driving lights in it and the smooth cowl cover to get rid of the vents since I'm running Vintage Air.

I'm looking for a 2" cowl hood blem since I'm just going to paint it anyways.

John McIntire

11-30-2019, 11:09 AM

https://i.hmjimg.com/images/2019/11/30/E5DB10FE-3F13-4E08-B25F-7471FB1A9554.jpg

https://i.hmjimg.com/images/2019/11/30/29CDC7B8-E602-4A6C-9DA6-1FE6B885469B.jpg

Shotaro

01-02-2023, 08:14 AM

hotwheels

01-03-2023, 07:37 PM

still for sale? It is impossible to say so.

This original post was from 2014, so these parts were sold a long time ago, sorry! I think we might have some 2nd gen flat hoods in stock that we can discount. We are making new molds for the power bulge hood, so we won't be making more of them for a few months.

Steve68

01-04-2023, 03:42 PM

How come a moderator doesn't delete these OLD, LIKE ANCIENT threads!!!!!!

Shotaro

01-07-2023, 03:50 AM

This original post was from 2014, so these parts were sold a long time ago, sorry! I think we might have some 2nd gen flat hoods in stock that we can discount. We are making new molds for the power bulge hood, so we won't be making more of them for a few months.

okay Thank you

srode

01-07-2023, 03:53 AM

https://i.hmjimg.com/images/2019/11/30/E5DB10FE-3F13-4E08-B25F-7471FB1A9554.jpg

https://i.hmjimg.com/images/2019/11/30/29CDC7B8-E602-4A6C-9DA6-1FE6B885469B.jpg
What lower valance is that?

dhutton

01-08-2023, 04:25 AM

What lower valance is that?
https://anvilauto.com/products/1967-1968-lower-front-valance-3

srode

01-08-2023, 03:37 PM

Too bad they don't make a 69 like that - like the Marquez design.

hotwheels

01-09-2023, 08:56 PM

Thanks for posting the link! :twothumbs

hotwheels

01-09-2023, 08:59 PM

Too bad they don't make a 69 like that - like the Marquez design.

We do make one for '69s that have light pods that are separate so you can place them anywhere within the opening, or not have the lights at all. It also includes the fender extensions.

1969 Lower Front Valance – Anvil Auto (https://anvilauto.com/products/1969-lower-front-valance)