83hurstguy
11-05-2014, 09:01 PM
Used Painless F5 dual fan controller for sale, approximately 3 years old with very low street mileage. Worked perfectly, removed last fall due to a Holley EFI swap. Temperature sending unit and inline power fuse included. Asking $110 shipped to lower 48. SOLD!
Brand new Canton Racing trap door oil pan for 307-455 Olds engines (15-502), with pickup (15-503) and oil pan studs (22-300). This is the only off the shelf baffled/road racing type pan you can buy for an Olds engine. These three items from Summit Racing cost $272 + $34 + $12. I then had the brand new pan powdercoated satin black to hide the ugly gold plating, the powdercoated was able to prep the pan without blasting, so there's no fear of media trapped inside. The powdercoating cost another $50. Therefore, I have $368 into this pan as it sits. Never even been bolted to an engine, sold my project and have no need for it. Asking $300 shipped to the lower 48, which is slightly cheaper than summit racing lists it for, and you get the powder coating free.
https://www.pro-touring.com/attachment.php?attachmentid=104866&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=104867&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=104868&stc=1
Corvette reproduction L-88 air cleaner base with aftermarket aluminum lid for 14" filter. I clearanced a few small sections of the base by adding minor dents to work on a quadrajet carb, and it's not really noticeable. The L-88 bases have a huge drop and have been tested to make more power than most other typical drop base air cleaners on the market from what I had researched. Both parts are new and have not been used on an engine. I gave the aluminum lid a quick polish by hand, to be show quality it would need a bit more time/effort, though it it certainly presentable. Asking $70 shipped to the lower 48 for the lid and base, as shipping will be $20 on the package. Air filter shown in picture is NOT included.
https://www.pro-touring.com/attachment.php?attachmentid=104869&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=104871&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=104870&stc=1
Set of SBC serpentine brackets and pulleys. SOLD!
Brand new Canton Racing trap door oil pan for 307-455 Olds engines (15-502), with pickup (15-503) and oil pan studs (22-300). This is the only off the shelf baffled/road racing type pan you can buy for an Olds engine. These three items from Summit Racing cost $272 + $34 + $12. I then had the brand new pan powdercoated satin black to hide the ugly gold plating, the powdercoated was able to prep the pan without blasting, so there's no fear of media trapped inside. The powdercoating cost another $50. Therefore, I have $368 into this pan as it sits. Never even been bolted to an engine, sold my project and have no need for it. Asking $300 shipped to the lower 48, which is slightly cheaper than summit racing lists it for, and you get the powder coating free.
https://www.pro-touring.com/attachment.php?attachmentid=104866&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=104867&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=104868&stc=1
Corvette reproduction L-88 air cleaner base with aftermarket aluminum lid for 14" filter. I clearanced a few small sections of the base by adding minor dents to work on a quadrajet carb, and it's not really noticeable. The L-88 bases have a huge drop and have been tested to make more power than most other typical drop base air cleaners on the market from what I had researched. Both parts are new and have not been used on an engine. I gave the aluminum lid a quick polish by hand, to be show quality it would need a bit more time/effort, though it it certainly presentable. Asking $70 shipped to the lower 48 for the lid and base, as shipping will be $20 on the package. Air filter shown in picture is NOT included.
https://www.pro-touring.com/attachment.php?attachmentid=104869&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=104871&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=104870&stc=1
Set of SBC serpentine brackets and pulleys. SOLD!