67 C10 Rendering

[Ben@SpeedTech]

I just wrapped up this rendering for our new shop truck build. Plans are a high hp LS3, our new C10 complete chassis system, and some cool subtle body mods. Check out more here... https://www.pro-touring.com/threads/110416-Project-CT-67-C10-by-Speedtech Let us know what you think!

https://static1.pt-content.com/images/noimg.gif

[csouth]

Very nice Ben! I'll definitely be following the build.

[Ben@SpeedTech]

Very nice Ben! I'll definitely be following the build.

Thanks Chris! This will be a fun one!

There are already a handful of cool trucks in the P-T community, and we're looking forward to doing our version too. Hopefully it will inspire the movement, right now the thing to do with a truck is set the frame on the ground at the car show. That looks cool but usually those type suspensions aren't practical for much more than normal driving or sitting still in the grass. Our aim is to help the C10 guys realize they can have a low stance and wicked handling. With our frame design it should be about the lowest static stance on the market, so with an air ride the frame should still hit the ground (or be super close) and at normal height it will tear up the autocross track and will still drive nice.

[audioman]

Wish I would have done the 67 when I built my 69 C/10. I want to do a 4WD in the future, but fisrt have to get a friend's 69 nova pro-touring car completed.
103845103846

[Ben@SpeedTech]

when I built my 69 C/10.
https://www.pro-touring.com/attachment.php?attachmentid=103846&stc=1

That's really nice and clean. Good looking truck!

[Bob in St. Louis]

Yea, that's about perfect right there. Super sharp, very classy.