View Full Version : Its in!!! Its in!!!
Genros
09-15-2014, 11:26 AM
I feel like a kid at Christmas. I had a hang up with the clutch (another $1300 later) new clutch is on its way. then install the trans. Adjust a few things then melt the tires!!!!!!!!!!
http://i1240.photobucket.com/albums/gg497/domgw/7B332575-FE9A-40BD-A8E7-E6EBC2C21F13_zpskpjxgvcq.jpg
http://i1240.photobucket.com/albums/gg497/domgw/0150A672-258A-4C3B-AEFF-D47A8C23382E_zps6kqlgonb.jpg
GeoffP
09-15-2014, 04:32 PM
Nice! How much of the Corvette accessory drive did you use from the LS6 and how well does it line up?
steery
09-15-2014, 08:23 PM
I'm using the same Alt/ps set up on my LSA conversion too, also a 69 Camaro. What did you do with the power steering reservoir? Would love to see a picture of it if possible.
ADiCarlo
09-15-2014, 08:59 PM
All these LSA's are making me jealous.
Genros
09-16-2014, 04:13 AM
ill takes some pics and send it over. We used alot of the drive from the LS6 again ill sed some pics over. Ill be back there tomorrow or Thursday hoping to set trans and start dyno tuning
andrewb70
09-16-2014, 06:27 AM
Did you swap out the ECU? The LS6 is a 24 tooth engine and the LSA is a GenIV 58 tooth engine.
Andrew
mikewoods
09-16-2014, 06:53 AM
This is going to be NASTY! I can't wait to see some burn out videos!
Genros
09-16-2014, 05:35 PM
andrew, we used one of the lingenfelter conversion box
mike, yes 700 plus sounds like a few sets of tires will be blown off
Powered by vBulletin®