"Project Lowbrow" 1961 F100 Unibody

[lungerbrothers]

Hey there heres my latest project a 1961 Ford F100 Unibody doing all kinds of stuff to her ill be posting build pics on here

Enjoy, Solomon

https://www.pro-touring.com/attachment.php?attachmentid=102330&stc=1
heres the rendering i got made for her done by hermance design

https://www.pro-touring.com/attachment.php?attachmentid=102331&stc=1

https://www.pro-touring.com/attachment.php?attachmentid=102332&stc=1

https://www.pro-touring.com/attachment.php?attachmentid=102333&stc=1

https://www.pro-touring.com/attachment.php?attachmentid=102334&stc=1

https://www.pro-touring.com/attachment.php?attachmentid=102335&stc=1

https://www.pro-touring.com/attachment.php?attachmentid=102336&stc=1

how she looked when i got her

https://www.pro-touring.com/attachment.php?attachmentid=102337&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=102338&stc=1

https://www.pro-touring.com/attachment.php?attachmentid=102339&stc=1

pulled the front clip off
https://www.pro-touring.com/attachment.php?attachmentid=102340&stc=1
time to yank the motor & trans out
https://www.pro-touring.com/attachment.php?attachmentid=102341&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=102342&stc=1
someone welded the mounts had to plasma them open
https://www.pro-touring.com/attachment.php?attachmentid=102343&stc=1
we have liftoff
https://www.pro-touring.com/attachment.php?attachmentid=102344&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=102345&stc=1
the original chassis undisturbed
https://www.pro-touring.com/attachment.php?attachmentid=102346&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=102347&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=102348&stc=1
out with the old, axles that is
https://www.pro-touring.com/attachment.php?attachmentid=102349&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=102350&stc=1
frame getting striped down
https://www.pro-touring.com/attachment.php?attachmentid=102351&stc=1
cutting out a few crossmembers and cleaning over 50 years of gunk
https://www.pro-touring.com/attachment.php?attachmentid=102352&stc=1
https://www.pro-touring.com/attachment.php?attachmentid=102353&stc=1

[compos mentis]

Those are good looking trucks.

What driveline is it getting?

[redmist]

Will be watching this... I have a 1965 Ford F-100 that is awaiting it's day. It was my first vehicle, and my wife and I dated in it through high school!

Looks motivating!

[lungerbrothers]

thanks buddy and im planning on using a 5.0 coyote motor with some extras ;)

[lungerbrothers]

Hey there here iss a little update.

I got the frame up on the frame bench, got my ride height established (5" from rocker), built some fixtures to hold it in place, had to make some room in the bed cut out majority of it for now, layed out my cut lines on the frame and started cutting. Im moving up the rear of the frame 14" from factory so there is going to be alot of modifying, Ill keep you guys posted.

Until next time, Solomon

102479

102480

102481

102482

102483

102484

102485

102486

102487

102488

102489

102489

102490

102491

102492

[Peter Mc Mahon]

Awesome, Love the rendering as well.

[lungerbrothers]

Awesome, Love the rendering as well.

thanks buddy

[Arrowhead]

Awesome! I've been looking for a uni for about a year to build a pro touring truck. Since you beat me to it I'll just sit back and soak up all the coolness.

[lungerbrothers]

Awesome! I've been looking for a uni for about a year to build a pro touring truck. Since you beat me to it I'll just sit back and soak up all the coolness.

sorry to hear that i spoiled the fun, Solomon

[lungerbrothers]

hey guys heres what i got done for her this week

102730

102731

102732

102733

102734

built the transition made it out of 3/16ths flat stock


102735

102736

got the fab 9 rear end built - made from 3/16ths flat stock and 3" x 250 wall tubing


102737

102738

102739

102740

102741

made a body cart so i can move the body around and free up the rack


Ill post up another update next week, Solomon

[Auto Rod Technologies]

Sick rendering!!! Love that interior!!!

[lungerbrothers]

Sick rendering!!! Love that interior!!!

thanks buddy

[topstring]

Any updates on this project? Id love to know the color.

[Dukguy]

Was it finished?