Which gauges are you running?

[hotrod56]

What gauges are you running? Stock dash? Pics would be great!

[mmosley]

Stock appearing. Redline Gauge http://www.redlinegaugeworks.com/ Custom Gauges using a reproduction factory bezel. The temperature and oil pressure are factory Stewart Warner. Voltmeter and Fuel are custom, speedo is custom and calibrated, tach is aftermarket Stewart Warner 8k tach refaced to appear stock, colored/lettered with redline of my choosing. Factory voltage regulator swapped to solid state. Set up to use the factory one plug harness connection with all the indicator lights functional. I am considering backlighting the tach with a large shift light, or just putting one inside an AC vent. The only deviation from stock appearance on the dash will be the push to start button in place of the ignition key. That is on the underside inset in the lower dash pad, so it will not stick out. I even have a factory four speed console and boot that fit over the T56 six speed. I swapped the shifter ball to an old cue ball style so it looks much like an old four speed.

Antique Auto Radio will be coming out with a drop in replacement head unit that will appear factory for my car later this year. This year Barracuda comes with an unusual thumb dial radio which is quite cool. I can easily set it up with Bluetooth for my phone, music, and etcetera; it also has RCA outs if I want to run a sub or amp. The '68-'69 Barracuda radio is similar to other "A" body cars, but has unique brackets, so I need to make sure they will offer the option. I may just send my factory AM radio to Ward's and have them convert the innards so I can keep the simpler look of the AM radio with the "Solid State by Plymouth" lettering on the face.
Here is the "B" body version from Antique Auto which is similar: http://www.radiosforoldcars.com/newradiomoparB68.htm

102360

[David LaBuda]

Autometer Cobalt gauges. The blue led lighting looks awesome at night! My dash isn't exactly stock though...

https://static1.pt-content.com/images/pt/2014/01/DSC_0059_zps1974d1cd-1.jpg (http://s44.photobucket.com/user/dlabooda/media/1970%20Chevelle/DSC_0059_zps1974d1cd.jpg.html)
https://static1.pt-content.com/images/pt/2014/09/DSC_0157-1.jpg (http://s44.photobucket.com/user/dlabooda/media/1970%20Chevelle/DSC_0157.jpg.html)

[65 drop top]

I just ordered up some dakota digital vhx gauges today. They will fit into my factory bezel and look good.

[Yelcamino]

I have Dakota VHX gauges in my C10...

https://static1.pt-content.com/images/noimg.gif (http://s263.photobucket.com/user/hlumpp/media/1963%20C10/DSC04465_zpsd2ad2eaa.jpg.html)

[ChevelleNV]

Autometer Elite's in a custom 70 Chevelle dash....

https://static1.pt-content.com/images/pt/2014/09/IMG_2079e1406040771281-1.jpg

[hotrod56]

Greg
Nice; Can you tell us how you made that dash/bezel? Do you have any pics of it without the gauges (front and back)?

[ChevelleNV]

Greg
Nice; Can you tell us how you made that dash/bezel? Do you have any pics of it without the gauges (front and back)?
The bezels are 3D printed out of plastic on a MakerBot 3d printer and then epoxied to the dash which was fiber glassed to fill in the factory holes. and I have a bunch of pictures on a post on my blog @ http://chevellenv.com/2014/07/custom-dash-progress/

[hotrod56]

I really like your build concept and the dash is great. Makes me want to copy it but I wont because of your one off status. Might come close though.

[ChevelleNV]

I really like your build concept and the dash is great. Makes me want to copy it but I wont because of your one off status. Might come close though.

Have at it...keep in mind that I have somewhere in the neighborhood of about 120+ hours in this dash project so far, and still have a lot of other small bezels to make (A/C controls, A/C vents, etc...)...

I had to do a lot of fiberglass work on the dash and getting the correct curvature i wanted, digitizing the dash on a CNC and learning soildworks to model the dash curve and all the bezels, and print and test the parts multiple times until I was happy with the final print and fit of the parts.

so be prepared to spend some time on it.....but it will be worth it... :)

[WallaceMFG]

I put Speedhut gauges in my Torino and I'm very happy with them. The ability to completely customize the gauges is pretty cool.

102380

Here's what I plan on using for my Chevelle, I've started building the dash panel for them already

102381

[Arrowhead]

I put Speedhut gauges in my Torino and I'm very happy with them. The ability to completely customize the gauges is pretty cool.

I'm thinking of switching to Speed Hut also. Having a hard time finding a six gauge set that I can get matching fuel pressure and boost pressure. I also want them backlit as I have Auto Meter now and might as well have no gauges at night - they are so hard to read with the side lighted faces. I can get all 8 Speed Hut gauges for under $800

[Motown 454]

69 Camaro Metrom billet gauge panel with 3-3/8 Ultralite II speedo and tach and 2-1/6" full sweep Water temp, oil psi, Fuel level, and Volt meter.

[hotrod56]

Motown:

Do you feel that the 3 3/8 and 2 1/16 gauges are big enough or do you wish they were bigger?

[scott_fx]

speedhut for sure for one simple reason... you can customize the gauge so you don't have a brand/logo repeated 5+ times on your dash:
102633
102634

[hotrod56]

speedhut for sure for one simple reason... you can customize the gauge so you don't have a brand/logo repeated 5+ times on your dash:
102633
102634

What size are those?

[scott_fx]

smaller ones are 2-1/16
speedometer and tach are 3 3/8"

[130fe]

Running dakota digital VHX in my 68, they are very nice!

[Barrrf]

Does anyone do LCD style displays anymore? MiMod is gone. The Pioneer AVG has been discontinued for a long time. Everything else is OBDII dependent.

[scott_fx]

Does anyone do LCD style displays anymore? MiMod is gone. The Pioneer AVG has been discontinued for a long time. Everything else is OBDII dependent.
autometer:
https://www.youtube.com/watch?v=IaORsNLo0Wo

and me...if i didn't give up on the project :\
http://youtu.be/caR26RecI4E

[Barrrf]

Autometer doesn't sell those to the public yet. Only project builders and race teams. And it ain't cheap - I asked.

Makes me want to wait until I get the LM7 done so I can do obd2 stuff.

[hotrod56]

I asked too. Probably 5K. They said that they are coming out with a street version that will probably be from 1500 to 2500 (the guy I talked was purely speculating though).

[FirebirdSteve]

AutoMeter

https://static1.pt-content.com/images/pt/2013/04/DSC_0851_zps827208e3-1.jpg (http://s1231.photobucket.com/user/westcansteve/media/Firebird%20Build/DSC_0851_zps827208e3.jpg.html)

[KEV 190164]

speedhut in my trans am . https://static1.pt-content.com/images/pt/2014/07/SDC11568-1.jpg (http://s260.photobucket.com/user/kevinbreedon/media/SDC11568.jpg.html)

https://static1.pt-content.com/images/pt/2014/07/SDC11354-1.jpg (http://s260.photobucket.com/user/kevinbreedon/media/SDC11354.jpg.html)

[DSL]

Does anyone know if Autometer Sportcomp II gauges have integrated turn signal and/or high beam indicators?

[ChevelleNV]

Does anyone know if Autometer Sportcomp II gauges have integrated turn signal and/or high beam indicators?

No they dont

[DSL]

Any suggestions on a auto meter style gauges that have integrated turn and high beam indicators built in?

[hotrod56]

speedhut has them built in if you want.

[DSL]

Has anyone tried to undo Dakota Digital VHX gauges and install a more "Race" style analog gauges, such as Autometer or Speedhut?

Easy process or reinventing the wheel?

Dakota Digital's central control unit seems to be a simple, but is it easy to undo?

Was thinking about taking on this project on my own vs sending to speed shop.

[hotrod56]

just out of curiosity, what specifically would prompt this move?

[DSL]

Anyone running Stewart Warner gauges these days?

Is Stewart Warner the gauges of yesterday?

[hotrod56]

Anyone running Stewart Warner gauges these days?

Is Stewart Warner the gauges of yesterday?

The blackberry of gauges.

[DSL]

GPS or hard wired Speedo?

[manOwar]

Classic Instruments

[Barrrf]

FYI Autometer is releasing their digital dash to the public in December.

[hotrod56]

hopefully so. That is what they said last year also (12-2013)

[Barrrf]

They just announced it on their FB page last week. Doesn't matter to me, wont fit in my stock location or even with the Covans dash :(

[Nicks67GTO]

Is anyone running the VHX gauges in a 66-67 GTO? Iv'e been trying to find pics of them installed in an actual car and I cannot find them....

[au1991rx]

Cant say enough good things about Mark at New Vintage USA.. great customer service. Integrated turn signals with bright indicator and check engine light. I have not seen them lit up yet, but there is always hope that one day I will get this car back together, sorta. Sorry the pic is big.. cant seem to fix, sorry.

[Dave95Z28]

Cant say enough good things about Mark at New Vintage USA.. great customer service. Integrated turn signals with bright indicator and check engine light. I have not seen them lit up yet, but there is always hope that one day I will get this car back together, sorta. Sorry the pic is big.. cant seem to fix, sorry.

Whose dash insert is that?

[au1991rx]

http://mattsclassicbowties.com/contents/en-us/p9968

Purchased from Matts, Thunder Road panel... also great customer service.

[CapSS92]

Stock 95 Camaro gauges in a Covans blank panel installed in a 65 Chevelle. I wanted to be able to use off the shelf sending units. I still have to make a clear bezel for the front but otherwise it fit great.

Alex

[scott_fx]

That's pretty awesome!


Stock 95 Camaro gauges in a Covans blank panel installed in a 65 Chevelle. I wanted to be able to use off the shelf sending units. I still have to make a clear bezel for the front but otherwise it fit great.

Alex

[will69camaro]

Either going with NVU gauges or more likely a Racepak.

William

[camaro jeff]

I used classic gauges on both my 68 and 69 . I was satisfied with their product and would buy again. They have many styles to choose
from and you also can customize what you want. Very good customer service.
Jeff

[67CamNKC]

Installed my Dakota Digital VHX gauges today.
https://static1.pt-content.com/images/pt/2015/01/IMG_20150106_192157170_zpstexkglky-1.jpg (http://s874.photobucket.com/user/beal095/media/IMG_20150106_192157170_zpstexkglky.jpg.html)

[Interceptor5588]

Autometer in 70 GTO. Still the best to read at a glance. I looked seriously at the DD's and they're really nice, with the cruise control option for the GPS speedo and all, but just a little too gimmicky for me and a little harder to read.

[thumpt]

I will be using this one.


https://static1.pt-content.com/images/pt/2015/02/prd_880_zpscef4f346-1.jpg

[Motorcitydak]

Racepak is what i will be using!

[davidomilligan]

Holley efi digital dash

[kylewo0]

Phantoms,

May go back to the stock look. But these appealed to me years ago and I still like the look.

[GRNOVA]

Holley Digital Dash
https://static1.pt-content.com/images/pt/2015/03/59D36874F87D4E8CA6E2FEC83509F14D_zpsnu6y-1.jpg (http://s300.photobucket.com/user/tnt342/media/59D36874-F87D-4E8C-A6E2-FEC83509F14D_zpsnu6ys0eb.jpg.html)

[kylewo0]

that's cool.

[RadLS67]

I'm currently running Autometer nexus gauges. I don't have any good pictures of them at the moment but I like the ability to set warning points for the gauge to flash red, record parameters onto an SD card and instantly change the color of the gauges is just amazing. Installing them is pretty straight forward as well. REALLY digging on some of the Speedhut gauge setups some of you guys have as well!

[car_designer]

Currently have Speedhut in my Cutlass.

I'm probably going to be switching to Dakota Digital VHX.

Here is the current setup:

https://static1.pt-content.com/images/pt/2013/08/interior007_zps7f380d38-1.jpg

https://static1.pt-content.com/images/pt/2013/08/interior006_zps4bc2d871-1.jpg

https://static1.pt-content.com/images/pt/2013/08/gauge_panel_night_zps9eaf8aa8-1.jpg

[scott_fx]

why are you switching?

[car_designer]

If you're asking me, it is a combination of things.

The main reason is that last summer I was having overheating issues with my Cutlass was keeping a close eye on the temp gauge. I realised that with the size of the gauges I got (biggest I could fit) the numbers on the quad gauge were too small to easily read while driving at night. My choice of blue backlighting probably didn't help.

Second, I've had some technical issues with the speedometer. But I'm going to look into getting them fixed through the warranty.

[Interceptor5588]

Auto Meter FTW

[Tincup]

Autometer Carbon Face gauges in my Dart,

110092

Speedhut for my truck

110093

[hotrod56]

Tincup:

Nice. Where did you get the carbon? What type and how thick is it?

[Tincup]

Tincup:

Nice. Where did you get the carbon? What type and how thick is it?

It's actually 1/4" thick aluminum with 3M carbon vinyl on top.

[67RS]

111987111988

[1976CamaroGuy]

I put the New Vintage 69 series gauges in a 70-78 Camaro covan bezel I textured. I also used the led's that came with the new vintage kit and relocated them in the panel for a stealth look

https://static1.pt-content.com/images/pt/2014/04/20140423192249_zpse8126f0a-1.jpg

https://static1.pt-content.com/images/pt/2014/04/20140423192255_zps627bc73d-1.jpg

I installed my lens and wired up my led's. I basically cut up the lens from my new vintage kit for my install.

For the turn signals I drilled holes in the bezel and used nylon spacers to mount the led's from behind the arrow lens . I hot glued the lens first then the spacer...it's really bright lol

I wrapped tape around it to diffuse the light from lighting up the spacer

https://static1.pt-content.com/images/pt/2014/04/20140424185451_zpseeba02ba-1.jpg

https://static1.pt-content.com/images/pt/2014/04/20140424185501_zpsf8937f91-1.jpg

https://static1.pt-content.com/images/pt/2014/04/20140424203546_zpsa466c24f-1.jpg


The lens actually has a texture face and blends in with the bezel when the led's aren't on...pretty low key

https://static1.pt-content.com/images/pt/2014/04/20140424203427_zpsb7a2f555-1.jpg

One thing I did notice was that my colors were reversed on the check engine and brake warning. I used the housing supplied by new vintage and the led's were already glued in. my kit came with a vertical lens and they sent me a horizontal lens free of charge so I guess there was a different layout between the two ....oh well it still looks pretty good. I since relocated the led's and the brake light is red and the check engine is amber now



https://static1.pt-content.com/images/pt/2014/04/20140424203453_zps87f37f12-1.jpg

[boomerjv]

Just received my Speedhut gauges.
I went back and fourth Btwn auto meter and Speedhut. The warranty and being able to pick your own lighting color made it a easy decision. Took about 3 weeks to get them.

[BillSalZman]

Dakota Digital VHX series inside the original '67 bezel/cluster assy.

[CampbellshotrodsAZ]

I guess now that I have my gauges I can add them to this thread, thought I think I voted Dakota Digital before, you can add Speedhut to my list.
https://static1.pt-content.com/images/noimg.gif (http://s26.photobucket.com/user/blazinred87/media/71%20Firebird/0928151750_zpshahbgeua.jpg.html)

[WallaceMFG]

I posted in here a while ago with the Speedhut gauges in my Torino. Here's a picture of the Speedhuts I put into the Chevelle. Fabricated a panel into the dash so the gauges are all Frenched in instead of a flat panel.

https://static1.pt-content.com/images/pt/2015/08/20150524_175929_zpshlk1fc6o-1.jpg (http://s44.photobucket.com/user/hondaman117/media/20150524_175929_zpshlk1fc6o.jpg.html)

[Alwhite00]

Intelletronix - Definitely not as cool as most of these on here but they work for my 6.0 swap. Also have 1/4 mile time, 0-60, etc. This is in a 67 Chevelle - Made a plexi backer molded in the oven to get everything to match up. Car is not on the road yet so can not report on how they work.

https://static1.pt-content.com/images/pt/2015/10/IMG_20150728_174745_zpsfb4wsw4z-1.jpg[/URL]

https://static1.pt-content.com/images/pt/2015/10/DSCF7490_zpseopqhtee-1.jpg (http://s925.photobucket.com/user/alwhite00/media/White%2067/DSCF7490_zpseopqhtee.jpg.html)

[R1N2L3R]

dbl post

[R1N2L3R]

I guess now that I have my gauges I can add them to this thread, thought I think I voted Dakota Digital before, you can add Speedhut to my list.
https://static1.pt-content.com/images/noimg.gif (http://s26.photobucket.com/user/blazinred87/media/71%20Firebird/0928151750_zpshahbgeua.jpg.html)

Great looking gauges josh. How did you get the Trans Am logo in there? I tried to go on their site but could not find that image. did you find it somewhere else?

[CampbellshotrodsAZ]

Great looking gauges josh. How did you get the Trans Am logo in there? I tried to go on their site but could not find that image. did you find it somewhere else?

Thanks, they look a lot better in person. It's hard to visualize with their online simulator, but they're definitely nice high-end pieces. As far as the logos, I asked them about that directly. They said due to copyright issues, they couldn't have these original emblems on their page, but they have a box to upload whatever logos you want. So I Google imaged this one, and placed it on with their builder. Pretty simple to do.

[feeble]

Got my panel cut, clear powder coated to protect the brushed finish and Speedhut gauges installed.

https://static1.pt-content.com/images/noimg.gif

[corvettekid1973]

I put Speedhut gauges in my Torino and I'm very happy with them. The ability to completely customize the gauges is pretty cool.

102380

Here's what I plan on using for my Chevelle, I've started building the dash panel for them already

102381

Similar to my Speed Huts

[FLYNAVY53]

I just wish Speed Hut offered a 5" speedo and tach....

[AKlowriderZ71]

Removed these AutoMeter Phantom gauges from the car.

https://static1.pt-content.com/images/pt/2015/12/511C6CDE51F745829333E1F7F80D0B97-1.jpg (http://s557.photobucket.com/user/aklowriderz71/media/67%20Camaro/511C6CDE-51F7-4582-9333-E1F7F80D0B97.jpg.html)


I decided to use the 1969 series from New Vintage USA. Just need to get them wired up!

https://static1.pt-content.com/images/pt/2015/12/38F7CAEE710C483CA589EC306B52983F-1.jpg (http://s557.photobucket.com/user/aklowriderz71/media/67%20Camaro/38F7CAEE-710C-483C-A589-EC306B52983F.jpg.html)

[OldTimer]

I decided to go with a carbon fiber dash insert from Classic Dash. Still researching which gauges, but top of the list right now are the New Vision's pictured below (Photoshopped mock-up). I like the center spin gauges, and the blue detail... my '69 Camaro is LeMans Blue. Plus the gauges light up blue. Idiot lights have to be figured out, but worse case is the LED panel lights shown.

https://static1.pt-content.com/images/pt/2017/04/DKDPopulatedCFDash05_zpsduuqzmz0-1.jpg

I think the dash insert and gauges will go nicely with my MOMO wheel, and my intention is to selectively use carbon fiber on the dash and restored OEM console to tie it all together. Got the insert last week, hope to decide on the gauges this week so I can get them installed soon.

https://static1.pt-content.com/images/pt/2017/04/MOMO_5107_zpsn9mcblx2-1.jpg

Mike

[1sikride]

Auto meter. - muscle

[OldTimer]

Looks like SpeedHut is the only manufacturer that actually lets you design your own gauges. I might've considered Auto Meter but I'm not nuts about their fonts, they seem to be crammed. Originally my heart was set on a aluminum grey gauge face, and of course New Vision CFR only comes in black although they supposedly offer some custom work. I called, waiting for a call back.

Speed Hut let's you pick the face color, the font and tick color and style, the nighttime color, the pointer color, the center button. Their big gauges are a strange size, 4-1/4" hole bore. Classic dash uses a 4-1/2" bore size. Speed Huts gps speedo can also have the directional and hi-beam leds built in.

A little more research.

[Camaro68+69]

in my 68 Camaro I have Autometer Ultra-Lite in a custom gauge pod mounted to a 2010 Camaro center Console139926

[lxg44]

Dakota Digital installed their VHX gauges in my 69 Cougar factory gauge panel. Great people to work with.

139932139933

[nokones]

Since, I am running the Holley HP EFI Compter on my 1989 Corvette, I thought about going with the Holley Digital Display. I decided not to because the intent was to get away from the OEM Digital Instruments and get back to real analog gauges so I went with Speedhut because you can customize the gauge to your specs. without any additional cost. Also, I had the Corvette Logo added to my GPS driven Speedometer, and the Tach. The custom dash work was designed and fabricated by JCG Restoration and Custom in Oxnard, CA
139951
139952
139953

[OldTimer]

Was wondering about toeing in the idiot lights, for those of you with these newer electronic gauges, does the gauge light up when fuel is low or water temp is very high?

Kenny, that's a nice looking setup above.

[nokones]

Thanks for the comment. Yes, I Speedhut does offer the idiot lights on either some or all of their gauges. I elected to not have any idiot lights. I wanted to keep it simple.

[OldTimer]

The thing I like about SpeedHut is the various customizing options. I roughed up a couple of approaches in Photoshop to see the overall look. In the end, I opted for their white face with black markings since my Camaro is LeMans Blue with white interior and white hockey stripes. Also added a Camaro script in the two main gauges along with a color band redline on the tach. The nighttime color of the gauge faces was spec'd as light blue (see comment below).

https://static1.pt-content.com/images/pt/2017/05/4i7kAeO-1.jpg

Here's a shot while trial fitting the insert. This is what I see through the steering wheel while driving. Its a big improvement on the stock layout. I might think about tweaking the angle of the two lowest gauges, but I'm not having a problem.

https://static1.pt-content.com/images/pt/2017/05/JWGC6Ne-1.jpg

Just recently got this installed, I have one minor gremlin to iron out... its the lights on background color for the gauges. I may have a bad inverter because when I turn on the lights, the pointers all glow nice and red, but the white face is supposed to be blue and its not lighting up at all. Hope to tackle that tomorrow. Calibrating the gas tank was challenging, but I got it done. Also reset the GPS speedo odometer to read what was on my original speedometer because MASS DMV checks your mileage once a year at inspection time. Wouldn't look good if I had next to nothing on the odometer when they have a historical record on file.

144619

I decided that everybody and his mother seems to have the OEM woodgrain trim on their '69 SS cars, so thats why I went with the carbon fiber look. I had everything dipped in the most realistic pattern we could find. That included the console trim panels and the soon to be installed grab bar pane that goes above the glove box. I think it ties tit all together and I've received many compliments at last weeks cruise night.

[GoodysGotaCuda]

SpeedHut
143939

[MAGONSTERZ68]

Currently installed NVU 68 CAMARO gauge set.
Im setting up for occasional auto cross days and have installed both oil cooler with temp sensor and trans cooler with temp sensors but debating on where to cleanly mount up two more gauges. Overall keeping the stockish look of the interior and dont want out of place gauges to drown out the simplicty and clean look of the factory dash.
Has any one set up the coolant temp gauge on a multi pole switch to be able to toggle between all three sources?

[USAZR1]

My 70 Elco has a Dakota Digital VHX dash, with white faces and blue lighting.

https://static1.pt-content.com/images/pt/2017/09/IMG_0386_750x801-1.jpg

[OldTimer]

I haven't installed any "idiot" lights yet but I'm going to use the 12mm dash panel lights pictured below for at least the Emergency Brake and the Generator. Any working idiot light needs a sending device. In truth, we add analog gauges because idiot lights are very often useless. My SpeedHut GPS speedo... I ordered it with built in directional and high beam leds. They are tiny, but they are right in front of me not out of sight. The SpeedHut fuel gauge has a built in low fuel led so when you calibrate the tank and set empty & full parameters the gauge will light up before it goes empty... supposedly ar 1/8th tank.

The 12mm directional arrow units draw so little current that you could drive both the speedo directional and the somewhat larger and more graphic 12mm by simply tapping into the directional lines. Same goes for brights. I started off thinking I needed a slew of indicators, but I've been driving with this for two weeks and I'm having second thoughts about some of the indicators. The second image below shows a populated insert. I may actually put a Bluetooth capable radio in the "normal" position and use the left lower side for switches. I removed the cigarette lighter already and put in a dual port USB device that works great.

[mert.celet]

Soooo in love with my Speedhuts!

[pittpens24]

I went with the Carbon Fiber Autometer gauges. Love 'em. Only thing I had to mod was turn signal lights - used small leds and drilled them into the top of the speedo and tack housing. Never even notice they are there unless you are looking for them. Still under construction, but about ready to turn over to the upholstery shop.

[csouth]

Speedhut

146621

[GoodysGotaCuda]

146821

[nokones]

Did anyone count up the different brand of gauges and see which brand was the most popular? Just curious. I think Speedhut may be the most popular brand.

[thedugan]

Just wrapping up putting a Racepak Iq3 Street in my 67.

[railroad bob]

I saw Speedhut mentioned, ordered 3 gauges. They have a large number of options available for many of the features.
Type of bezel, needle, face colors, number fonts, sizes,etc. You can get a custom label on the face.
I haven't made a final decision on the dash they will go in. Speedo is GPS. Quarter mile, 60 foot, other performance can be measured. Tach has adj red line and shift points.

151416151417151418151419151420151421

[SD67]

Not too many Classic Instruments fans out there? Why? Anything other than just looks?

[MAGONSTERZ68]

not shooting for concours resto - tons of pro touring mods - compatability for conversions - more data than my basic fuel, speed and idiot lights.......are the a few i contemplated when swapping out.

[xavier296]

NVU custom gauges. Before and after below.
151661
151662
No clue why they are upside down, sorry.

[MAGONSTERZ68]

nice im runnin NVU as well with they built in the tic toc tac in new retro style

[c4racer2]

All autometer pro white face in stock dash locations here.
71 Camaro. Looks great and functions as you would expect.
Never an issue.