gardnerme
08-26-2014, 02:22 PM
I have two separate sets of Small Block Chevrolet headers for 1st generation F-bodies and presumably 68-72 or so Novas.
The first set is a set of Stainless Works ceramic coated w/ 1 3/4" primaries and 3" slip-fit collectors. Have O2 senor bungs at the collectors. The front passenger's side primary has been dimpled to clear the front upper a-arm bolt. They also have some scrapes on the bottom where it looks like they did not quite make it over a speed bump (they are not TOO bad and the pic below is the worse of the two sides). It does look like they would clean up pretty well with a little aluminum polish and time. I had bought them second hand, but they do not work with my aftermarket subframe and steering rack so I cannot use them (or I would!). $400 OBO.
https://static1.pt-content.com/images/pt/2014/08/IMG_1963-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1963.jpg.html)
https://static1.pt-content.com/images/pt/2014/08/IMG_1964-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1964.jpg.html)
https://static1.pt-content.com/images/pt/2014/08/IMG_1965-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1965.jpg.html)
https://static1.pt-content.com/images/pt/2014/08/IMG_1966-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1966.jpg.html)
The second set came on my car when I bought it, and they are steel (not stainless). I do not know the manufacturer, but the primary pipes look to be about 1 5/8" in diameter (they measure 1.65" O.D.) and the collectors are 3". Other than the light surface rust, these are in very good shape. There are not dents, dings, dimples or scrapes on them. $50 OBO.
https://static1.pt-content.com/images/pt/2014/08/IMG_1961-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1961.jpg.html)
https://static1.pt-content.com/images/pt/2014/08/bb49fb3f61eb44a58c5bb4aa9fdd9556-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/bb49fb3f-61eb-44a5-8c5b-b4aa9fdd9556.jpg.html)
I am going to the Run to the Music City event this weekend (at least Friday and Saturday) and could bring them up there is anyone is interested. All reasonable offers considered. I want them out of my garage. :getout: Just reply or shoot me a PM with questions or comments, and thanks for looking!
The first set is a set of Stainless Works ceramic coated w/ 1 3/4" primaries and 3" slip-fit collectors. Have O2 senor bungs at the collectors. The front passenger's side primary has been dimpled to clear the front upper a-arm bolt. They also have some scrapes on the bottom where it looks like they did not quite make it over a speed bump (they are not TOO bad and the pic below is the worse of the two sides). It does look like they would clean up pretty well with a little aluminum polish and time. I had bought them second hand, but they do not work with my aftermarket subframe and steering rack so I cannot use them (or I would!). $400 OBO.
https://static1.pt-content.com/images/pt/2014/08/IMG_1963-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1963.jpg.html)
https://static1.pt-content.com/images/pt/2014/08/IMG_1964-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1964.jpg.html)
https://static1.pt-content.com/images/pt/2014/08/IMG_1965-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1965.jpg.html)
https://static1.pt-content.com/images/pt/2014/08/IMG_1966-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1966.jpg.html)
The second set came on my car when I bought it, and they are steel (not stainless). I do not know the manufacturer, but the primary pipes look to be about 1 5/8" in diameter (they measure 1.65" O.D.) and the collectors are 3". Other than the light surface rust, these are in very good shape. There are not dents, dings, dimples or scrapes on them. $50 OBO.
https://static1.pt-content.com/images/pt/2014/08/IMG_1961-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/IMG_1961.jpg.html)
https://static1.pt-content.com/images/pt/2014/08/bb49fb3f61eb44a58c5bb4aa9fdd9556-1.jpg (http://s918.photobucket.com/user/gardnerme/media/Parts%20for%20sale/bb49fb3f-61eb-44a5-8c5b-b4aa9fdd9556.jpg.html)
I am going to the Run to the Music City event this weekend (at least Friday and Saturday) and could bring them up there is anyone is interested. All reasonable offers considered. I want them out of my garage. :getout: Just reply or shoot me a PM with questions or comments, and thanks for looking!