View Full Version : Project RedOne SS '70 Chevelle Convertible 572 Procharged RS Chassis Sema Project
customshop
08-19-2014, 04:22 PM
1970 Chevelle convertible SS Project for Goodmark at Sema. Roadster Shop Chassis, 572cu in GM Crate motor with F1 Procharger, Holley Terminator EFI with TB Injection on a Blow thur hat. Holley Fuel Pump and reg. Weld Racing RT wheels, Continental tires Track 295/30/18 and 265/35/18,
all new GoodMark Sheetmetal, Coilover shocks, Wilwood brakes, Stainless tank,
Custom built bumpers with chin spoiler built in and custom LED and HID lights,
Been working on this about 2 months now. all sheetmetal work is done finished primer and ready to block and paint.
driveit
08-20-2014, 05:31 AM
Wish they made one of those for a 74 Chevelle. That looks amazing!
customshop
08-20-2014, 03:55 PM
sheet metal work all done all new Good Mark Ind. panels
front bumper has LED day time running lights and amber turn signals molded in.
Protouringstang73
08-20-2014, 11:28 PM
Looking good.. Where did you purchase those LED running lights and amber turn signals? :)
customshop
08-21-2014, 07:55 PM
We made them for it.
Protouringstang73
08-22-2014, 10:10 AM
I really like it.. Do you have a picture of it when the LED's are turned of? I would really like to see it :)
customshop
08-22-2014, 07:12 PM
Here is a pic of it not Lit and primered and ready for paint.
I just finished painting the body an adding the graphics.
Chevy Bow Tie Ghosted in the the stripes.
Faded front to back.
Hope to get the bumpers painted asap.
customshop
08-23-2014, 01:22 PM
Front and rear bumper are all painted charcoal met and silver Prospray Spectra pearl faded on the top.
LED light are molded on and almost disappear when off.
Protouringstang73
08-24-2014, 03:19 AM
Wow, it looks so cool, beautiful paint and those LED's are outstanding!
customshop
08-25-2014, 03:31 PM
lots of sanding and buffing now.
Procharger parts just showed up.
customshop
08-29-2014, 06:03 PM
got the rear bumper and LED tail Lights installed today.
572 Cu IN BBC with Procharger F1 with Holley EFI Ternimator with 2225 lb Injectors.
est 1,000 hp we will see.. all polished brackets Tuff Stuff Poilshed water pump, alt, and P/S
Hedmen Headers Ceramic coated, we are working on the Pypes Exhaust system next.
Steele Rubber seals going on as well.
A blown FI 572, it doesn't get any better than that. Awesome.
What transmission are you going to use?
Those LEDs are pretty slick, flexible and with blinkers and back up lights integrated, bad ass.
customshop
09-02-2014, 08:14 PM
were going with a 4L80E or a T400 from Bowler Perf.
customshop
10-12-2014, 05:41 PM
Weld Racing WHeels and Continental tires installed
Holley EFI with 225 lb Injector in a TB Terminator system
Procharger F1 Blow thur system
Pypes Stainless Exhaust All welded up and Stainless tank installed
Trunk panels built and Covered with Sony amplifers.
customshop
10-19-2014, 06:21 PM
Weld Racing Rims and Continental Auto Cross tires. all mounted up.
customshop
10-27-2014, 05:49 PM
We only a few more days be for Sema. We are looking pretty good have a few more thing to do but
really close. it running and driving good. a few minor thing to wrap up.
customshop
11-13-2014, 05:01 PM
Sema Was Great RedOne SS went over well.
Congrats man, it looks amazing.
Must be a blast to drive to.
customshop
12-04-2014, 07:18 PM
thnx winter will keep us from driving it much till spring time.
customshop
04-10-2015, 08:54 PM
all finished up ready for some road time and Shows.
Powered by vBulletin®