Scorpion Endurance Series Rockers

[jtwoods4]

Hey Guys,

I am upgrading the Rocker Arms on my 1970 Trans Am road racer. After a road race this weekend at Road Atlanta I cracked the trunion on my cheap Chinese made Steel PRW Rocker. Anyway, Scorpion offers a RACE series and an ENDURANCE Series rocker. The Endurance series is new for 2013 and is marketed for Endurance Racing Situations. It is also 30 grams lighter than the Race series rocker. I called Scorpion and they said for a road race application with constant high RPM shifts they would recommend the Endurance Series rocker because it will be light on the valve train. Scorpion also includes a lifetime warranty on all there rockers. I am running a vintage Pontiac 400 engine so the Shaft mount system was not available for me, Stud mount only.

Anyway, do any of your have any experience with the Endurance Series rockers?

Endurance Series
http://www.scorpioncheckout.com/Endurance_Series_Stud_Shaft_Mount_Rockers_s/192.htm
Available in many ratios
For high endurance racing engines including offshore powerboat racing engines
Designed with a lower profile to assist in fitting under stock height valve covers with no interference
Lightweight design with short polylocks

[silvermonte]

I havnt used them, but my good buddy runs them on his dirt modified. He has never had an issue with them.

[jtwoods4]

I havnt used them, but my good buddy runs them on his dirt modified. He has never had an issue with them.

Hell if they last on a dirt modified then they will be fine on a track day 70 Trans Am :). I'm excited :yum: