MonzaRacer
06-06-2014, 10:50 AM
My Pastor has picked up a 96 'Stang 3.8 manual. We had to replace rear brake line fuel and return line to filter. so NOW we have the pressure line from tank side of filter to top of tank at pump thats rusted out.
It's partially braided steel thats crimped to steel line.
What I need is either someones take off as long as it will fit a 5/16 inlet fuel filter, or a possible way to tie into the factory braided steel and hook to either new steel line or replacement plastic/nylon fuel line. Thats what I ran from midship back from my SUR&R fuel line kit for pressure and return.
This is the flex line that allows tank too come down so it can be removed.
HELP, spare parts or a better idea is needed here.
ThAnks,
Lee
It's partially braided steel thats crimped to steel line.
What I need is either someones take off as long as it will fit a 5/16 inlet fuel filter, or a possible way to tie into the factory braided steel and hook to either new steel line or replacement plastic/nylon fuel line. Thats what I ran from midship back from my SUR&R fuel line kit for pressure and return.
This is the flex line that allows tank too come down so it can be removed.
HELP, spare parts or a better idea is needed here.
ThAnks,
Lee