PDA

View Full Version : 1972 Nova Pro Street



hdw64
05-25-2014, 07:29 PM
9632096321963229632396364

1972 nova pro street Nova. It runs on 92-octane pump gas and puts out 900hp at 7100rpm and 705tq at 5700 rpm. Construction on this primo-build was started in 2007 painted in 2008. All engine and chassis work finished in 2013. Fit and finish was worked on from 2008 to current and all parts have less than 100 miles on them. This car is virtually brand new.

The car sports a 565 cubic-inch Chevy big block with all forged internals, Edelbrock heads with 420flow. it's topped off with an Edelbrock intake and an 1150cfm Dominator carb. and 10.5:1 compression. It has a built Power glide transmission and a 40-spline Mark Williams 9-inch rear end with 4.30 gears. with custom Fab-9 housing

The front has tubular upper and lower control arms, QA1 coil overs, Strange hubs, disk brakes and rack and pinion steering. The rear has and adjustable four link, wish bone centering link, adjustable anti-squat bar Strange coil overs and disk brakes.

The car weights 3,000lbs wet and has a 8.50 certified roll cage. It has a 16 gallon fuel cell and Magnum ProStar 500 fuel pump.

Interior includes a full array of Autometer gauges in a carbon fiber dash. Padded Kirkey seats and a custom paneled interior with a Stealth Pro Ratchet Shifter.

The Hole Shot wheels are 15x15 wrapped with 33x18.5x15 Mickey Thompson Sportsman tires in the rear, and 15x4 with 26x7.50x15 Mickey Thompson Sportsman in the front. Fiberglass hood and bumpers make up the exterior. with much more.

The car is ultra clean top to bottom. The tube cassis is clean enough to eat off of. You couldn't dream to build this car for what I'm asking.
price-$63.000 Located in Ramsey, Minnesota

bad86ss
05-25-2014, 08:04 PM
Best of luck on the sale. Car is beautiful, build seems solid as well. Someone will be very happy and that price sounds low for what has been done . Like is said, beautiful car and good luck with the sale!

Bill Howell
05-26-2014, 04:45 PM
As per forum rules, location required

hdw64
05-26-2014, 06:07 PM
Thank you Bill corrected my bad

Bill Howell
05-26-2014, 07:16 PM
no problem, thanks!

hdw64
06-27-2014, 05:11 AM
--------SOLD-------on it's way to Phoenix