xx_ED_xx
05-24-2014, 08:59 PM
:headbang: I haven't posted on here in a while, back then there wasn't much truck love. But it seems that has changed
I have had the truck since 07 started life as a v6 5 spd. Got a 454 6 months later and then a 496 and a mild 505 and then a rear mount turbo and now a better 505 and finishing up a front mount setup. I also did a full ride tech air ride. c6 z06 brakes on all 4 corners 15 inch rotors front 14 inch rear. Now I am upgrading the stock rear end for the new found power. The one thing i didn't like about the ride tech kit was the panard bar so when i layed out the truck the rear end would shift over. So I am attempting to install a corporate 14 bolt in it and i also want to move the bags forward of the axle so i can install a watts link. Unfortunately i dont have a lot of experience with this stuff i am going to buy a 3/8 thick off road cover for the 14 bolt and from there I am lost on how to figure out the best way to set this up. So if any of you can give me some input much appreciated.
And now since most of us dont read penthouse for the articles I will post some pictures...
https://static1.pt-content.com/images/pt/2014/05/20131213161645_zpsf9c36daf-1.jpg (http://s1239.photobucket.com/user/S_B0MB/media/BODY/2013-12-13161645_zpsf9c36daf.jpg.html)
https://static1.pt-content.com/images/pt/2014/05/DSC01124-1.jpg (http://s1239.photobucket.com/user/S_B0MB/media/Intake/DSC01124.jpg.html)
I have had the truck since 07 started life as a v6 5 spd. Got a 454 6 months later and then a 496 and a mild 505 and then a rear mount turbo and now a better 505 and finishing up a front mount setup. I also did a full ride tech air ride. c6 z06 brakes on all 4 corners 15 inch rotors front 14 inch rear. Now I am upgrading the stock rear end for the new found power. The one thing i didn't like about the ride tech kit was the panard bar so when i layed out the truck the rear end would shift over. So I am attempting to install a corporate 14 bolt in it and i also want to move the bags forward of the axle so i can install a watts link. Unfortunately i dont have a lot of experience with this stuff i am going to buy a 3/8 thick off road cover for the 14 bolt and from there I am lost on how to figure out the best way to set this up. So if any of you can give me some input much appreciated.
And now since most of us dont read penthouse for the articles I will post some pictures...
https://static1.pt-content.com/images/pt/2014/05/20131213161645_zpsf9c36daf-1.jpg (http://s1239.photobucket.com/user/S_B0MB/media/BODY/2013-12-13161645_zpsf9c36daf.jpg.html)
https://static1.pt-content.com/images/pt/2014/05/DSC01124-1.jpg (http://s1239.photobucket.com/user/S_B0MB/media/Intake/DSC01124.jpg.html)