Pedal layout information

[Alaska GTO]

been searching the threads but can't find any info on laying out my pedals for my ls2 conversion in 66 lemans, it was originally an auto car and I'm going manual 6 speed, anything on after market or using the setup i puled from my 04 gto, i have the drive by wire pedal, brake and clutch and master cylinder assembly. or should I use something else for ease of installation thanks

[Bonehead]

Not overly complicated. I used a clutch/brake pedal assembly from a donor and will use the pedal assembly out of the donor truck my LQ4 came out of. Haven't gotten to the gas pedal yet, but its coming quickly as I tie up the interior. Should be a post on the hydraulic clutch assembly on my blog. Link in my sig. 67 El Camino, so the same basic under dash as yours.

[Alaska GTO]

Thanks will check it out