PDA

View Full Version : Edelbrock E-Force Mustang 5.0L Supercharger Street Legal Kits 1588



Cdog
04-14-2014, 01:53 PM
Smokin deal you won’t get anywhere else. Brand new in the box. Located in Torrance. Call me to discuss details for pick up. Corey 714-658-6291


$5200


Specs from site.

Edelbrock # 1588 E-Force Supercharger System for 2011-2013 Ford Mustangs with 5.0l V8 Engines. One of Ford's most legendary engines.... the 5.0l is back! This Supercharger System is exclusively designed by Edelbrock to provide instant, reliable & safe HP for a stock Mustang 5.0l with low boost or minimum engine stress. It features minimum air restriction in & out of the supercharger, along with individual 15" long intake runners that allow for maximum low end torque for great performance. Edelbrock Supercharger provide the most power at the lowest amount of boost, resulting in performance that is safe to operate on a completely stock engine. This Supercharger Features:

• Designed for 11-13 Ford Mustang 5.0l V8 Applications
• Produced 559HP & 503 ft/lbs on Edelbrock's Dyno Test
• Supercharger Manifold Assembly (Featuring Eaton TVS Rotors)
• Cast Aluminum Front Drive Bracket
• Heavy Duty Automatic Belt Tensioner
• Cast Aluminum Water Crossover
• Large 110 Sq-in Intercooler
• Full Face, Low Temp Heat Exchanger for Intercooler System
• Goodyear Gatorback Serpentine Belt
• Electric Intercooler Water Pump
• Intercooler Recovery Tank
• Custom Molded Intercooler Hoses
• Fuel Injectors (50 lb/hr)
• Supercharger Pulley 3.75"
• Steel Idler Pulleys with Heavy Duty High Speed Bearings
• High Flow Panel Air Filter for Stock Airbox
• Extruded Aluminum Fuel Rails
• Handheld Calibration Module, Preloaded with All Tunes
• Plug & Play, Electrical Harness & Installation Hardware

93884
93883
93882
93881

Cdog
04-17-2014, 10:24 AM
Where are all the Ferd guys? Am I priced too high? Make me an offer!!!

Cdog
04-23-2014, 07:51 AM
Bump for the Ferd huffer.

Cdog
04-28-2014, 11:32 AM
Make a offer!

medbali76
04-28-2014, 11:49 AM
:-( I would buy a kit like this for my 4.6 3v...

Cdog
04-28-2014, 11:54 AM
:-( I would buy a kit like this for my 4.6 3v...

We can ship!!

medbali76
04-28-2014, 11:56 AM
Shipping is not a big deal but this kit is for the 5.0 not for the 4.6 3V

Cdog
04-28-2014, 11:59 AM
Shipping is not a big deal but this kit is for the 5.0 not for the 4.6 3V

Ah! I’m not a ferd guy so I’ll have to take your word for it. You should upgrade to a 5.0. LOL!

medbali76
04-28-2014, 12:02 PM
Ah! I’m not a ferd guy so I’ll have to take your word for it. You should upgrade to a 5.0. LOL!

Yes, I know :)

Cdog
04-28-2014, 12:16 PM
Yes, I know :)

How is it over in Hungry? It’s on my places to visit. Do they have a big hot rod culture? The food and women both look delicious! LOL!

medbali76
04-28-2014, 12:53 PM
How is it over in Hungry? It’s on my places to visit. Do they have a big hot rod culture? The food and women both look delicious! LOL!


OOOOH Yessss they are :) :)
There are many nice cars as well not really pro tourers and track cars but nice American hot rods and drag cars from the early to the late models. We have US car meets pretty frequently.

bigbirdwpg
07-21-2014, 08:08 AM
Smokin deal you won’t get anywhere else. Brand new in the box. Located in Torrance. Call me to discuss details for pick up. Corey 714-658-6291


$5200


Specs from site.

Edelbrock # 1588 E-Force Supercharger System for 2011-2013 Ford Mustangs with 5.0l V8 Engines. One of Ford's most legendary engines.... the 5.0l is back! This Supercharger System is exclusively designed by Edelbrock to provide instant, reliable & safe HP for a stock Mustang 5.0l with low boost or minimum engine stress. It features minimum air restriction in & out of the supercharger, along with individual 15" long intake runners that allow for maximum low end torque for great performance. Edelbrock Supercharger provide the most power at the lowest amount of boost, resulting in performance that is safe to operate on a completely stock engine. This Supercharger Features:

• Designed for 11-13 Ford Mustang 5.0l V8 Applications
• Produced 559HP & 503 ft/lbs on Edelbrock's Dyno Test
• Supercharger Manifold Assembly (Featuring Eaton TVS Rotors)
• Cast Aluminum Front Drive Bracket
• Heavy Duty Automatic Belt Tensioner
• Cast Aluminum Water Crossover
• Large 110 Sq-in Intercooler
• Full Face, Low Temp Heat Exchanger for Intercooler System
• Goodyear Gatorback Serpentine Belt
• Electric Intercooler Water Pump
• Intercooler Recovery Tank
• Custom Molded Intercooler Hoses
• Fuel Injectors (50 lb/hr)
• Supercharger Pulley 3.75"
• Steel Idler Pulleys with Heavy Duty High Speed Bearings
• High Flow Panel Air Filter for Stock Airbox
• Extruded Aluminum Fuel Rails
• Handheld Calibration Module, Preloaded with All Tunes
• Plug & Play, Electrical Harness & Installation Hardware

93884
93883
93882
93881

What does the kit weigh and what is the shipping weight (in the crate)?

Cdog
07-21-2014, 10:53 AM
What does the kit weigh and what is the shipping weight (in the crate)?

I believe it’s all in boxes so no crate is needed. The shop can take CC +fee for your protection. I’ll find out the weight. Can you PM me your address and contact info?

Thanks,

Corey