VooDoo - 1969 Camaro at GAP Racing

[GAP Industries]

VooDoo is a 1969 Camaro that came to us for Vintage Air, Suspension Upgrade, new wheels, and a few other minor mods. It soon changed direction and turned into a complete build. We started making some body mods and noticed the car had a lot of filler in it. So then we had it media blasted. Once the car became a full build, we sat down with the customer to come up with a game plan. The car titled "VooDoo" will have a Twin Turbo BBC, Full DSE Suspension, Custom Cowl Hood that extends to the windshield, Goolsby Door handles, Custom rear spoiler, 67/68 Fuel filler, Raised fuel tank into trunk floor, DSE Mini Tubs, Forgeline wheels, and a bunch of other body modifications.
https://static1.pt-content.com/images/pt/2014/01/IMG_1664_zpsc60e23c3-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1664_zpsc60e23c3.jpg.html)

[GAP Industries]

Here is the car that we started with
https://static1.pt-content.com/images/pt/2014/01/IMG_4037_zpse7b41f6d-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_4037_zpse7b41f6d.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/IMG_4038_zpsfef58291-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_4038_zpsfef58291.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/IMG_4039_zpsebc54aa7-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_4039_zpsebc54aa7.jpg.html)

[GAP Industries]

The tear down begins
https://static1.pt-content.com/images/pt/2014/01/IMG_4063_zps5646662d-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_4063_zps5646662d.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_4161_zps18be43df-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_4161_zps18be43df.jpg.html)
We started to smooth out the firewall and then ended up modifying the column area too
https://static1.pt-content.com/images/pt/2014/01/IMG_4464_zps37b3b1bd-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_4464_zps37b3b1bd.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_4599_zpsda868715-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_4599_zpsda868715.jpg.html)

[GAP Industries]

Then we welded up a few items like side markers and the antenna hole
https://static1.pt-content.com/images/pt/2014/01/IMG_0052_zps240cd98e-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_0052_zps240cd98e.jpg.html)

[GAP Industries]

Mini Tubs and trunk floor/fuel tank
https://static1.pt-content.com/images/pt/2014/01/IMG_0053_zps410a3c09-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_0053_zps410a3c09.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_0063_zps5feabfbf-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_0063_zps5feabfbf.jpg.html)
Shaved the Drip rails
https://static1.pt-content.com/images/pt/2014/01/IMG_0122_zps14851fea-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_0122_zps14851fea.jpg.html)
Started fitting the new trunk lid
https://static1.pt-content.com/images/pt/2014/01/IMG_1124_zpsbe63b9f7-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1124_zpsbe63b9f7.jpg.html)
DSE Frame connectors going in
https://static1.pt-content.com/images/pt/2014/01/IMG_1225_zps2a39d0e0-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1225_zps2a39d0e0.jpg.html)
Then we decided to send the car to be media blasted
https://static1.pt-content.com/images/pt/2014/01/IMG_1239_zps43ddb0d4-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1239_zps43ddb0d4.jpg.html)

[GAP Industries]

The new DSE Subframe arrived while the car was out getting blasted
https://static1.pt-content.com/images/pt/2014/01/IMG_1320_zpsd4f50563-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1320_zpsd4f50563.jpg.html)
Moser 12 Bolt rear end was ready to be welded up too
https://static1.pt-content.com/images/pt/2014/01/IMG_1355_zps9a80402f-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1355_zps9a80402f.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_1359_zps71273e1c-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1359_zps71273e1c.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_1360_zps1bad23e1-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1360_zps1bad23e1.jpg.html)

[GAP Industries]

Now on to the good stuff
https://static1.pt-content.com/images/pt/2014/01/IMG_1382_zps2a89f1df-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1382_zps2a89f1df.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_1371_zpsf26904f6-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1371_zpsf26904f6.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_1519_zpsfbbb634b-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1519_zpsfbbb634b.jpg.html)
Tires arrived so we could use the Wheel Works tool to get the correct backspace
335/30/20 and 285/35/19
https://static1.pt-content.com/images/pt/2014/01/IMG_1539_zps926a343c-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_1539_zps926a343c.jpg.html)

[GAP Industries]

Started to mod the tail pan
https://static1.pt-content.com/images/pt/2014/01/1385417_589800754398996_1570266312_n_zps-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/1385417_589800754398996_1570266312_n_zps950ac6ae.j pg.html)
https://static1.pt-content.com/images/pt/2014/01/1382272_589802681065470_2128956758_n_zps-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/1382272_589802681065470_2128956758_n_zps4372c155.j pg.html)

[GAP Industries]

Goolsby Handles installed
https://static1.pt-content.com/images/pt/2014/01/photo1_zps298f6877-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/photo1_zps298f6877.jpg.html)
and a better shot of the drip rails
https://static1.pt-content.com/images/pt/2014/01/photo2_zps48331dba-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/photo2_zps48331dba.jpg.html)

[GAP Industries]

Forgeline GA3 wheels 20x12 and 19x10 with a custom center cap
https://static1.pt-content.com/images/pt/2014/01/IMG_2532_zps5bb9199d-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_2532_zps5bb9199d.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_2533_zpsb706a60b-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_2533_zpsb706a60b.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_2534_zpsf4cb6db3-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_2534_zpsf4cb6db3.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_2574_zps7c8beb41-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_2574_zps7c8beb41.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_2586_zps03eed803-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_2586_zps03eed803.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/IMG_2588_zpsc860f152-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_2588_zpsc860f152.jpg.html)

[GAP Industries]

Started working on the rear spoiler. Still have a lot more work to do on it
https://static1.pt-content.com/images/pt/2014/01/IMG_2504_zps2e412674-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/IMG_2504_zps2e412674.jpg.html)

[GAP Industries]

Spoiler is pretty much finished up. Cut it open, now we need to cap the ends
https://static1.pt-content.com/images/pt/2014/01/2CC3EB908FF44862AE118263E15F28AB_zps49xl-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/2CC3EB90-8FF4-4862-AE11-8263E15F28AB_zps49xlk6mz.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/566C9E99F225446B9EDDCF7EDF416230_zpsd9av-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/566C9E99-F225-446B-9EDD-CF7EDF416230_zpsd9avim8j.jpg.html)

[GAP Industries]

Also did more work on the rear bumper. We cut it down and made it tight to the body. Also added a little length to it to make it fit the look we were going after. Still need to build the license plate area and raise it up so we have room for the center exit exhaust. The bumper is going to be molded into the car.
https://static1.pt-content.com/images/pt/2014/01/7133E57D3BE04E9484D610CA8B3B2944_zpsfcyz-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/7133E57D-3BE0-4E94-84D6-10CA8B3B2944_zpsfcyzydqt.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/49AAC64E361E4AE9A6F77EEBCE70F32D_zpsdgpw-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/49AAC64E-361E-4AE9-A6F7-7EEBCE70F32D_zpsdgpwjivp.jpg.html)

[GAP Industries]

We tightened up the trunk gaps and capped the ends of the spoiler. We can check that off the to do list
https://static1.pt-content.com/images/pt/2014/01/21A296F07D6F4BD498DE1A70A4AFD2C3_zpsqh59-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/21A296F0-7D6F-4BD4-98DE-1A70A4AFD2C3_zpsqh594yh7.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/8CB835D5432D4EBDA6B0AEACCABB750A_zpsbxcl-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/8CB835D5-432D-4EBD-A6B0-AEACCABB750A_zpsbxclevcq.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/ABDCD79B7B2C4193A88507F2B84A5306_zps98zd-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/ABDCD79B-7B2C-4193-A885-07F2B84A5306_zps98zdtnc8.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/9201E214E7734FFD94A3C7618ED4C1D7_zps6xxq-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/9201E214-E773-4FFD-94A3-C7618ED4C1D7_zps6xxqo5gy.jpg.html)

[SD67]

Build looks great! Can you tell me how many hours it took to complete the spoiler? Thanks, Lee

[GAP Industries]

Started on the extended rockers
https://static1.pt-content.com/images/pt/2014/01/9895349CBDA143A1A9B4ED9BEE2AE8EF_zpsbqss-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/9895349C-BDA1-43A1-A9B4-ED9BEE2AE8EF_zpsbqssdb4n.jpg.html)

[GAP Industries]

Here are more photos of the rocker progress. Still have a lot of finishing work to do
https://static1.pt-content.com/images/pt/2014/02/85D38EB771DC40D1AF66192461D2D5D2_zpsxec5-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/85D38EB7-71DC-40D1-AF66-192461D2D5D2_zpsxec5ht0z.jpg.html)
https://static1.pt-content.com/images/pt/2014/02/8AD926932B054D548BA94C1EAFA98CFC_zpsgbvm-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/8AD92693-2B05-4D54-8BA9-4C1EAFA98CFC_zpsgbvmelhk.jpg.html)
https://static1.pt-content.com/images/pt/2014/02/E95B4672B6724B429D91B84AAF83DF0A_zpsgsrt-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/E95B4672-B672-4B42-9D91-B84AAF83DF0A_zpsgsrtzopp.jpg.html)
https://static1.pt-content.com/images/pt/2014/02/60F4EA81B1CC4FE68945830252E22E45_zps5gzy-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/60F4EA81-B1CC-4FE6-8945-830252E22E45_zps5gzyyrme.jpg.html)
Still need to finish shaping the rear transition too.
https://static1.pt-content.com/images/pt/2014/02/11AADBDB77984266B3CE36623FD7EBB8_zpsqkw7-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/11AADBDB-7798-4266-B3CE-36623FD7EBB8_zpsqkw7f0lr.jpg.html)

[tmadden]

Just plain sexy!!!!

[GAP Industries]

Got the rocker welded up and re-shaped the rear section a bit
https://static1.pt-content.com/images/pt/2014/02/E85101DA5AA640B894AFE56043EC2A07_zpsnf55-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/E85101DA-5AA6-40B8-94AF-E56043EC2A07_zpsnf55ppgh.jpg.html)
https://static1.pt-content.com/images/pt/2014/02/E3B85280BA4D4667AB2065091B42843C_zpsri4a-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/E3B85280-BA4D-4667-AB20-65091B42843C_zpsri4aapyk.jpg.html)

[GAP Industries]

Got it on the ground. Made some coil over adjustments. Still have a lot of metal fab to do. Next we will work on the twin turbo setup, the engine bay area, and start on the roll cage.

https://static1.pt-content.com/images/pt/2014/02/890356574CAA4C4E956702F6EE631D8F_zpshho2-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/89035657-4CAA-4C4E-9567-02F6EE631D8F_zpshho24dsd.jpg.html)
https://static1.pt-content.com/images/pt/2014/02/F09060B0280B4A36B71513C6CC319451_zpsasko-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/F09060B0-280B-4A36-B715-13C6CC319451_zpsaskop70n.jpg.html)
https://static1.pt-content.com/images/pt/2014/02/B3F137C9C25E49C6BDB09C4EB569B6A7_zpshiqw-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/B3F137C9-C25E-49C6-BDB0-9C4EB569B6A7_zpshiqwh9p1.jpg.html)

Also finished up the license plate recess on the rear bumper
https://static1.pt-content.com/images/pt/2014/02/9B20FD0D220C406085A25B5134F71232_zpsswey-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/9B20FD0D-220C-4060-85A2-5B5134F71232_zpssweypflg.jpg.html)

[CliffS]

Nice fab, subscribed!

[GAP Industries]

Center speaker grill in the dash was deleted
https://static1.pt-content.com/images/pt/2014/03/C4DA4B44BE734326873566A92BAE3FE3_zpsth3m-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/C4DA4B44-BE73-4326-8735-66A92BAE3FE3_zpsth3mrvja.jpg.html)
Plus we made a bezel for the shifter
https://static1.pt-content.com/images/pt/2014/03/402FE392AE5840528EFE12EC6F7ECCFF_zpscfxz-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/402FE392-AE58-4052-8EFE-12EC6F7ECCFF_zpscfxzixmq.jpg.html)

[GAP Industries]

Turbo fabrication time
https://static1.pt-content.com/images/pt/2014/03/07B09846530643899AAA559019062633_zpsxnmf-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/07B09846-5306-4389-9AAA-559019062633_zpsxnmfmkx0.jpg.html)
https://static1.pt-content.com/images/pt/2014/03/9DB6315C5ADA40E7A9E4A5C47A7B7CC8_zpszwdk-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/9DB6315C-5ADA-40E7-A9E4-A5C47A7B7CC8_zpszwdkguu9.jpg.html)
https://static1.pt-content.com/images/pt/2014/03/2F59B37AA47146319AF719A38747CFB2_zpswwp8-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/2F59B37A-A471-4631-9AF7-19A38747CFB2_zpswwp8viow.jpg.html)
https://static1.pt-content.com/images/pt/2014/03/4517CF2596594C2F907B5B63BCFBB544_zpssxsh-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/4517CF25-9659-4C2F-907B-5B63BCFBB544_zpssxshp5pn.jpg.html)

[85coupe50]

Great fab skills! Another killer Camaro in the works!

[Build-It-Break-It]

Nice build. Are those off the shelf OBX turbo manifolds?

[GAP Industries]

Been crazy around the shop with so many cars coming back from paint or heading to paint. Got the turbos mocked into place. Not sure if we are going to leave them here or find a better location for them in the future.
https://static1.pt-content.com/images/pt/2014/04/78E5D33F2F9046AD84691E2A392B27E0_zpsvuxz-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/78E5D33F-2F90-46AD-8469-1E2A392B27E0_zpsvuxzzfjg.jpg.html)
Also got the new "wide" fenders and lower valance in from Anvil Auto
https://static1.pt-content.com/images/pt/2014/04/255B049FB3E8483DB155A92AD914B5CD_zps5y3l-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/255B049F-B3E8-483D-B155-A92AD914B5CD_zps5y3lm3wx.jpg.html)
https://static1.pt-content.com/images/pt/2014/04/58080617F84A4AEB999B6F56BA3204C3_zpsl7d2-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/58080617-F84A-4AEB-999B-6F56BA3204C3_zpsl7d2uso8.jpg.html)
https://static1.pt-content.com/images/pt/2014/04/752F314992B643ABBB5B6336E297FB72_zpsboxf-1.jpg (http://s1337.photobucket.com/user/GAPracing113/media/VooDoo/752F3149-92B6-43AB-BB5B-6336E297FB72_zpsboxfp7ys.jpg.html)

[zamora7]

Damn, sick build. Will keep an eye on this one.

[SD67]

Anymore updates? Great build, need to see more!