1971 Nova Build ?? [Archive]

Kiquee71

01-13-2014, 10:49 AM

Hello, new member here. Always been reading this forum and now ready to post our build ( my 7 yr old ) who knows quite of bit about cars lol.

Bought the Nova back in 2011 for $3500 from a son who was selling his fathers vehicles when he passed. Sold my Chevelle that I built a while ago, cause drag racing in southern CA got to be too much. Here are a few pics of the all original, (still had the spare tire and manual) Nova before the tear down. Will post more and details of plan when I get a chance, doing this while at work :) enjoy

https://static1.pt-content.com/images/pt/2014/01/565614723A94458A9372A33314E564BC_zpsqcvy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/56561472-3A94-458A-9372-A33314E564BC_zpsqcvybmng.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/25BA8FCE87734898BD548A90B9363C9A_zps2chi-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/25BA8FCE-8773-4898-BD54-8A90B9363C9A_zps2chis3b2.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/DD079772A0A44698968AE714D092BC78_zpsa8hd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DD079772-A0A4-4698-968A-E714D092BC78_zpsa8hdqqy5.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/C56A33070EB04549939612D62172EED4_zpsb2ef-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C56A3307-0EB0-4549-9396-12D62172EED4_zpsb2efychv.jpg.html)

Kiquee71

01-13-2014, 11:31 AM

Ok, photos not uploading from my iPhone. Damn. Anyone have any suggestions? Or will have to wait till I get home later. I'll read some more to try and figure this out.

novaboy009

01-13-2014, 11:35 AM

Upload to a site like photobucket, then post the link to the image URL here.

Kiquee71

01-13-2014, 12:01 PM

Ok, got the photos going on this Woo hoo. I'll update with more tomorrow, getting late.

Kiquee71

01-13-2014, 09:26 PM

:pics2::cheers:

Ok, got the photos going on this Woo hoo. I'll update with more tomorrow, getting late.

Ben@SpeedTech

01-14-2014, 08:28 AM

Very Cool!! What's that thing under the dash?? Looks like a loud speaker, maybe a 1971 answer to a modern day big amp? ;) Lol.

Looks like a great project, as a huge Nova fan I'm looking forward to seeing more.

DVS51

01-14-2014, 09:55 AM

Looks like a great car to start with. What upgrades are you planning?

Kiquee71

01-14-2014, 11:52 AM

Update: Hehe it was a speaker connected to original stereo. Ok my plans for this build is to be a everyday car that can handle just as good as a new sports car and run a drivetrain of this time. Here are my goals for the Nova-

-Clean up subframe & re-weld all welds & seams
-Ridetech front suspension
-Speedtech Torque Arm rear suspension with Ridetech coilover shocks.
-Ly6 / Mast Cam swap, full length headers and full exhaust
-4L80E tranny
-Ford 9in rear end
-Body mods include, firewall filler plate and fill holes, home made sub frame connectors, DSE mini tubes, fill in side lights, move gas filler between tai lights,
-aftermarket fuel tank
-Power windows
-Wheels are yet to be determined after mini tub, but am looking at 18x11 or 12 for rear and 18x9.5 up front, tires 265 or 275 up front & 315 or 335 for rears
-body work and paint will Not be done by me lol. Will be looking for a shop.

I'm sure I'm forgetting somethings, but here are some photos of the progress.

https://static1.pt-content.com/images/pt/2014/01/AC2CDBA4A90140DC9232E4EA1B6F16D3_zpsogxf-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/AC2CDBA4-A901-40DC-9232-E4EA1B6F16D3_zpsogxfqps5.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/607AE4D2612743198AAF0C5C88EDCC44_zps7pud-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/607AE4D2-6127-4319-8AAF-0C5C88EDCC44_zps7pudgwz7.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/502C9F4D471B4E41BE1FFC3C012CF3AF_zpsvywa-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/502C9F4D-471B-4E41-BE1F-FC3C012CF3AF_zpsvywai8wz.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/14EEA0CA47D24CF098355EBBEA4982EF_zps85s4-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/14EEA0CA-47D2-4CF0-9835-5EBBEA4982EF_zps85s4pnfo.jpg.html)

Ben@SpeedTech

01-14-2014, 03:20 PM

Kiquee71

01-14-2014, 09:14 PM

Sounds Awesome! Those wheel caps are what came on my granny fresh 73 Nova when I bought it, I loved those things, lol! Looks like you're well under way. :)

Thanks, we're excited you've chosen the Torque Arm suspension. It's a great way to go and eliminates the inherent issues with 3 or 4 link suspensions, keeps the rear solidly planted and is easy to install. Just curious, what made you decide to not use our matched front suspension? Are you going with Air Ride? Novas with the frame on the ground look wicked. If not, our Chicane coilover conversion kit would work great with a stock subframe and our super tough race quality and track proven control arms have stainless cross shafts, greasable Delrin bushings, and have extra caster built into them.

Are you going to keep it Yellow?? Hmmm, would look cool with some gunmetal centers and brushed lips for wheels and satin sheen gunmetal gray trim and bumpers, a cool graphic on the hood, ...

Our Custom Hot Rod Shop (http://www.speedtechperformance.com/index.cfm/page/ptype=results/category_id=2/home_id=2/mode=cat/cat2.htm) can tackle that paint and body work when you're to that point, give us a call and we can set you up with an estimate. Let us know if there's anything else we can help you with. Keep the progress and photos coming! Looking forward to more. :twothumbs

Thanks Ben, and I have been in contact with your shop when I was trying to figure things out before I started. I sold all that OLD stuff that was on the car that I knew I wasn't going to use. I going with Ridetech cause of the whole package and simplicity of it. I know it doesn't make sense to me either lol, but wasn't sold on their rear suspension. No AirRide, coilovers. My son wants the yellow, says it Bumble Bee lol. Not doing yellow, not sure on color yet. I would love to have you give me an estimate, but I'm in Orange County, CA. Again thanks, and I will be in contact soon as the mini tubs are done, wheels fitted for measuring for rear end.

Kiquee71

01-14-2014, 09:51 PM

Ok, I've had a bunch of parts including the subframe off to get sandblasted.

https://static1.pt-content.com/images/pt/2014/01/6844039CCA314D50A453869886B2C86F_zpsafjg-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/6844039C-CA31-4D50-A453-869886B2C86F_zpsafjge40c.jpg.html)

Picked up subframe from being sandblasted and getting ready to clean er up, weld and threw a quick coat of primer to use later for mocking up the drivetrain, suspension. Boy the welds on this frame are UGLY!!!!!! Don't know how these car held together all these years. Lets get to work.

https://static1.pt-content.com/images/pt/2014/01/460C6B1832404273B2D707282014C9FB_zpskg4t-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/460C6B18-3240-4273-B2D7-07282014C9FB_zpskg4tp3cs.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/77F8912044AF4C579BBA94B1F3AAB685_zps6nmn-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/77F89120-44AF-4C57-9BBA-94B1F3AAB685_zps6nmnoleg.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/013819A0935C4755AF960E199DC83E3A_zpsjdhj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/013819A0-935C-4755-AF96-0E199DC83E3A_zpsjdhje51a.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/35FC91960CE74272BC132366D476AEFD_zpsprby-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/35FC9196-0CE7-4272-BC13-2366D476AEFD_zpsprbywzcy.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/0E33D25C090B4BB892A8360232979D66_zpsskfl-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0E33D25C-090B-4BB8-92A8-360232979D66_zpsskfl7nef.jpg.html)

craigs73

01-14-2014, 10:58 PM

wow looks great.....nice welds on frame

LUV2XLR8

01-15-2014, 05:04 AM

How much for the CLUB?... haha

Hello, new member here. Always been reading this forum and now ready to post our build ( my 7 yr old ) who knows quite of bit about cars lol.

Bought the Nova back in 2011 for $3500 from a son who was selling his fathers vehicles when he passed. Sold my Chevelle that I built a while ago, cause drag racing in southern CA got to be too much. Here are a few pics of the all original, (still had the spare tire and manual) Nova before the tear down. Will post more and details of plan when I get a chance, doing this while at work :) enjoy

https://static1.pt-content.com/images/pt/2014/01/565614723A94458A9372A33314E564BC_zpsqcvy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/56561472-3A94-458A-9372-A33314E564BC_zpsqcvybmng.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/25BA8FCE87734898BD548A90B9363C9A_zps2chi-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/25BA8FCE-8773-4898-BD54-8A90B9363C9A_zps2chis3b2.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/DD079772A0A44698968AE714D092BC78_zpsa8hd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DD079772-A0A4-4698-968A-E714D092BC78_zpsa8hdqqy5.jpg.html)
https://static1.pt-content.com/images/pt/2014/01/C56A33070EB04549939612D62172EED4_zpsb2ef-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C56A3307-0EB0-4549-9396-12D62172EED4_zpsb2efychv.jpg.html)

Kiquee71

01-15-2014, 07:23 AM

Thanks Craigs73, yea the welds are much better
now that I cleaned them up and filled up holes that the welders did back in days :).

Hey LUV2XLR8 sure you can have the Club for FREE + shipping. ;)

Ben@SpeedTech

01-15-2014, 08:02 AM

Yeah, nice welding, just a little better than stock!! Looks real good.

Lol! I bet kids think any yellow car now is "bumble bee". Amazing how a simple movie can affect the course of history. If you need help with ideas we offer rendering and design services too. Hmmm, that yellow's kinda catchy, though ;).

Keep the pics coming!! Looking forward to more.:twothumbs

LUV2XLR8

01-15-2014, 08:30 AM

Deal!!!!!!... haha... keep up the good work

Thanks Craigs73, yea the welds are much better
now that I cleaned them up and filled up holes that the welders did back in days :).

Hey LUV2XLR8 sure you can have the Club for FREE + shipping. ;)

bergers59

01-15-2014, 08:37 AM

nice build! I wish I could weld like that. Also if you're selling the dash surround or the kick panels let me know. :naughty:

DC-69

01-15-2014, 09:07 AM

looking good ...... my first car was a 69 Nova I will be watching ;)

craigs73

01-15-2014, 09:56 AM

Thanks Craigs73, yea the welds are much better
now that I cleaned them up and filled up holes that the welders did back in days :).

Hey LUV2XLR8 sure you can have the Club for FREE + shipping. ;)

did you mig or tig? looks like you had some long beads going....i was worried about it getting to hot and warping some how....you notice any problems?

Kiquee71

01-15-2014, 11:21 AM

[/QUOTE]did you mig or tig? looks like you had some long beads going....i was worried about it getting to hot and warping some how....you notice any problems?[/QUOTE]

Sorry Bergers59 keeping that stuff cause they are in great shape.

I TIG the whole frame and was jumping around while welding with low amps. I took some measurements before I started and after it didn't move any. I was running no longer than 6in beads.

Jon @ Hotchkis

01-15-2014, 12:40 PM

Looks like you had a really nice Chevelle. You couldn't have asked for a much better Nova shell to start with it looks like. Where in Orange County are you? Maybe we'll run into each other sometime!

Kiquee71

01-15-2014, 02:30 PM

Looks like you had a really nice Chevelle. You couldn't have asked for a much better Nova shell to start with it looks like. Where in Orange County are you? Maybe we'll run into each other sometime!

Thanks Jon, my mom was the original owner of the Chevelle and then I got it and turned into a beast lol. Yes I was fortunate with this Nova. Original owner kept car in the garage most of the time. To my surprise no big rust spots :), I think someone left a damp towel on the trunk lid and it has small spots of rust in a circular pattern. Still has original paint and small amount of bondo on drivers door. Probably change out the skin tho. I'm in the area by Knotts Berry Farm, it would be a pleasure to meet you sometime.

Kiquee71

01-15-2014, 09:58 PM

Just want to give you guys or gals a heads up, I started this project last summer. I wasn't planning on putting it on a forum, but thought what the hell. Why not another Nova, but its mine :)

So, subframe done and put away for later. Now time for the body mods. First up is the firewall filler plate from DSE, nice piece and easy to install.

https://static1.pt-content.com/images/pt/2014/01/1D31DDEB39B14582BFA8D36A4461309C_zpsrjox-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1D31DDEB-39B1-4582-BFA8-D36A4461309C_zpsrjoxqlf8.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/BC8EF6A1C1534BB5B4612D7C6576995F_zpsgjjj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BC8EF6A1-C153-4BB5-B461-2D7C6576995F_zpsgjjjkhbk.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/B88DDB30C64F42B39D4F2646C82CDDC0_zpsdyve-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B88DDB30-C64F-42B3-9D4F-2646C82CDDC0_zpsdyvet3aa.jpg.html)

Now that the welding and grinding is done time for some quick primer. Next on the list is making some subframe connectors and that's where I'm at at this point. I have a an idea in mind and thanks to all the people who posts I have read in this forum. I'll post photos and soon as I complete this stage.

https://static1.pt-content.com/images/pt/2014/01/2C4AD6FE82A046D19C04499338ABA1A7_zpscjbk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2C4AD6FE-82A0-46D1-9C04-499338ABA1A7_zpscjbk5ogk.jpg.html)

turner-nova

01-17-2014, 10:34 AM

Great work on those frame welds! LOVE the Nova builds!!!

craigs73

01-17-2014, 10:51 AM

Kiquee71

01-17-2014, 12:16 PM

nice......i really need to get started back on mine.....on that dse firewall plate.. Do you weld it over the original firewall? or do you cut it out then weld in? have you checked out stevesnovasite.com? its a good site to.....you could get some ideas there as well... i have a build thread here and there.... but the thread here was started way later so i wouldnt bore anyone to death lol.... its slow going so here i try to post several updates in one post here hahahaha.... i cant wait to see what you do with the sub frame connectors...what other body mods you doing? i have deleted the side marker lights and the body trim and the badges..... also have plans to shave the locks on doors and trunk lid......blah blah blah lol sorry to hijack

No I didn't cut any of the firewall behind the filler plate, but did sooth some the AC hole, primered the back, tack them together from inside of firewall. I've been all over the web lol, been planning in my head since I bought it. Side marker delete is on my list, fuel between the taillights, but keeping the badges and door handles. Kinda like the old school look. No worries Craigs73.

Kiquee71

01-17-2014, 12:18 PM

Well I got started on the subframe connectors last week and got a little bit done today. My son doesn't have to school today so were going to the movies :) Here are some photos of where I'm at now. Maybe get some welding tonight with cold beverages ;)

https://static1.pt-content.com/images/pt/2014/01/D548A83A2B684B099E642C27B1522B2E_zpss9fp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D548A83A-2B68-4B09-9E64-2C27B1522B2E_zpss9fp6dkz.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/9CCA0AF3B2924A1A8EC4328C5CD81D7E_zpsj6qm-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9CCA0AF3-B292-4A1A-8EC4-328C5CD81D7E_zpsj6qmizz2.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/8770797E208A4912B626826122E08EC0_zps7u0s-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8770797E-208A-4912-B626-826122E08EC0_zps7u0sr29r.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/3A9FB267E6E54919A8AEFE60F8ADA28E_zpsfw2g-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/3A9FB267-E6E5-4919-A8AE-FE60F8ADA28E_zpsfw2g39p5.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/5A93E05C24314F0EBE9D018170018115_zpsq0iu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/5A93E05C-2431-4F0E-BE9D-018170018115_zpsq0iu9kkt.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/B0CD116F45644597BEB4DAEA8C801433_zpsd9jx-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B0CD116F-4564-4597-BEB4-DAEA8C801433_zpsd9jxaik7.jpg.html)

Moabdude

01-17-2014, 12:51 PM

Kiquee71

01-17-2014, 04:32 PM

Very nice to see an other Nova build.
I will surely follow this thread.

here is mine to give you some idea's, haha (I know, I stole some idea's from Troy)

https://static1.pt-content.com/images/pt/2014/01/IMG_1504_zps2fbfa262-1.jpg (http://smg.photobucket.com/user/bramrook/media/cars%20overig/IMG_1504_zps2fbfa262.jpg.html)

I'm pretty sure I'm not innocent of stealing ideas :rolleyes: Nice Nova, I'm planning on doing the driving lights or fog lights and incorporating them into the bumper :D keep up the good work.

regal454

01-17-2014, 04:41 PM

Great project...and a Steelers fan to boot! Subscribed.

craigs73

01-17-2014, 09:11 PM

No I didn't cut any of the firewall behind the filler plate, but did sooth some the AC hole, primered the back, tack them together from inside of firewall. I've been all over the web lol, been planning in my head since I bought it. Side marker delete is on my list, fuel between the taillights, but keeping the badges and door handles. Kinda like the old school look. No worries Craigs73.

oh im keeping handles just getting rid of the locks....im also wanting to put a fuel door between tail lights.....it will require some heavy mods for my car including the bumpers alone...... cant wait to see more of the finished product....

Kiquee71

01-21-2014, 09:32 PM

Well I finally got back to finishing up the welding on the subframe connectors that I made. Cleaned everything up and put some primer on
top and underside. Things are going to get a little bit slow, my son started his baseball season yesterday :) He came out to help clean up the Nova before we primered.

https://static1.pt-content.com/images/pt/2014/01/ABE6E845BFC14138B1A98B06139A4BBA_zpshmmk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/ABE6E845-BFC1-4138-B1A9-8B06139A4BBA_zpshmmk8bif.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/98DE8E5D8F8945CE981722833D82FF7C_zpsxvsg-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/98DE8E5D-8F89-45CE-9817-22833D82FF7C_zpsxvsgdeax.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/03808438A9F045A59051AB0AE34A288F_zpss7qj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/03808438-A9F0-45A5-9051-AB0AE34A288F_zpss7qjtqhj.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/ABE034F2101B497EB9DDCB356561B789_zpsue9b-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/ABE034F2-101B-497E-B9DD-CB356561B789_zpsue9byu9d.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/D57DC77FD1194D018B1D0BDA97DD0746_zpstomm-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D57DC77F-D119-4D01-8B1D-0BDA97DD0746_zpstommj21n.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/22047145B7654A05A008948E055F8D07_zps8bmm-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/22047145-B765-4A05-A008-948E055F8D07_zps8bmm7tg3.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/3EE638A3DDA5483E8C34AFE746264B02_zpsjh1z-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/3EE638A3-DDA5-483E-8C34-AFE746264B02_zpsjh1z8llk.jpg.html)

The next stage of this build is going to be the DSE mini wheel tubs, so i can determine wheel & tire size, differential width. Then I can start making some suspension purchases. Will keep posting as I get started on wheel tubs. Until then, don't they look pretty LOL :)

https://static1.pt-content.com/images/pt/2014/01/F1E937CFBA1044B7A1208CFB2B41AA9E_zpsq9je-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/F1E937CF-BA10-44B7-A120-8CFB2B41AA9E_zpsq9jeobjh.jpg.html)

Ben@SpeedTech

01-22-2014, 07:38 AM

Lookin' good. Tell your son we said good luck with baseball! :)

Kiquee71

01-22-2014, 11:43 AM

Thanks Ben, I will do that. I myself am probably more excited that his season started than he is lol.

1971novaSS

01-22-2014, 02:18 PM

Very nice start, hard to find a nova that clean and original. Top notch work by the way! Keep the pics coming!

Kiquee71

01-22-2014, 08:45 PM

Very nice start, hard to find a nova that clean and original. Top notch work by the way! Keep the pics coming!

Thanks 1971novaSS for the comments. By the way nice ride you have there, some day my son and I will be enjoying this ride. Doing what I can when I can, I enjoying building another car. As for the pics, will do.

Kiquee71

01-26-2014, 06:34 PM

So, I got started on the DSE mini tubs. Cut out the section of the stock wheel-well, ready to make the final cuts. More updates coming later.

https://static1.pt-content.com/images/pt/2014/01/D32C326FDF29406E89F7507512D21371_zpswgj3-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D32C326F-DF29-406E-89F7-507512D21371_zpswgj3utbf.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/D0FAB82E822349D9A48283C87FEB473E_zpspy9g-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D0FAB82E-8223-49D9-A482-83C87FEB473E_zpspy9gktyg.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/1C405FB17B854C56904F0A9BE181DE2B_zpsgnhh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1C405FB1-7B85-4C56-904F-0A9BE181DE2B_zpsgnhhbnxa.jpg.html)

https://static1.pt-content.com/images/pt/2014/01/A5B9D45FDF4E42C688C3CA076E755C36_zpsvqvw-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A5B9D45F-DF4E-42C6-88C3-CA076E755C36_zpsvqvwvtqa.jpg.html)

Kiquee71

01-29-2014, 01:55 PM

: update. Got some good and bad news from work, we start working 6-10's now till sometime in March. Money will be good, but everything else gets put on the back burner. I will try and squeeze some time in on the DSE mini tubs to get them done and post up the progress, but it will be slow. Want to say thanks to Cwylie on here for the parts I picked up from him and thanks to all who stopped by to take a look at my build. I will still be on the forum looking as always and getting ideas and pumped up to finish this bad boy. Till then.

Kiquee71

02-01-2014, 10:02 PM

I worked on the mini tubes for a couple of hours Friday evening after work. Made the final cut and cut out the section of the frame. Still need to clean up the existing tub flange, not sure to cut out the spot welds or leave the cut section flange by smoothing out the edges. Will see what I decide to do. Next will be fitting in the mini tubs and see how the fit will be. I think i might have to trim some more, but will see when I get them up in there. Here are some photos of the progress.

https://static1.pt-content.com/images/pt/2014/02/F0D6818D8B004136B313BF8F48A041B9_zps66k2-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/F0D6818D-8B00-4136-B313-BF8F48A041B9_zps66k2st8m.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/461940AD26734F78AD082DD74176F918_zpsc4ld-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/461940AD-2673-4F78-AD08-2DD74176F918_zpsc4ldxehf.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/92CE1F5B291546C189E8C6D7CDAC1045_zpssiz8-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/92CE1F5B-2915-46C1-89E8-C6D7CDAC1045_zpssiz860hr.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/EC1F3A4A2BA244D4819141EFEBB1FEBC_zpszluh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EC1F3A4A-2BA2-44D4-8191-41EFEBB1FEBC_zpszluhfzah.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/27C870CD3E3A43D6A1332A436B447C02_zpsfrac-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/27C870CD-3E3A-43D6-A133-2A436B447C02_zpsfracpscb.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/1E4B01838B6142B597C88B848DF8113C_zps644d-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1E4B0183-8B61-42B5-97C8-8B848DF8113C_zps644dgjdi.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/51D7DA45FDFE40738F1795E5561FEE69_zpsgx3f-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/51D7DA45-FDFE-4073-8F17-95E5561FEE69_zpsgx3ff0bn.jpg.html)

Kiquee71

02-13-2014, 09:52 PM

Ok, have a little bit of an update on the progress of my mini tubes stage. Have the been working on it with what very little time I have. Have the passenger side 95% done, trunk lid bracket and back seat firewall piece still need to be done to call a done deal. Works been getting busy and not sure when I'll get to the drivers side. I'm looking for a or pair of 335/30/18 tires, used preferred, bald, cuts in them whatever for mock up. If anyone knows someone who knows someone please send them my way. Thanks. Here are some pics of my progress.

https://static1.pt-content.com/images/pt/2014/02/513024899442495B83CB60C0AA4A3FF1_zpsbxqs-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/51302489-9442-495B-83CB-60C0AA4A3FF1_zpsbxqsf3go.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/ABAC6A5D9FFD46E182560E98E772A348_zpsb9b9-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/ABAC6A5D-9FFD-46E1-8256-0E98E772A348_zpsb9b9jzmt.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/863D9A2D38934462BFEE2E4352720D46_zpswccs-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/863D9A2D-3893-4462-BFEE-2E4352720D46_zpswccsrbdf.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/62B4065478C24DFC90A72E59E4B51289_zpsyjb9-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/62B40654-78C2-4DFC-90A7-2E59E4B51289_zpsyjb9p9ov.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/9894C8FF2C4F49FAAAD960709E4550FF_zpsjg10-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9894C8FF-2C4F-49FA-AAD9-60709E4550FF_zpsjg10n9dq.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/15144EF0B1D04563B1AF5DA86D73987E_zpsu5bn-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/15144EF0-B1D0-4563-B1AF-5DA86D73987E_zpsu5bnycwm.jpg.html)

https://static1.pt-content.com/images/pt/2014/02/4BAF61C8E62344109AC2EDA2F4CEDE94_zpsnthz-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4BAF61C8-E623-4410-9AC2-EDA2F4CEDE94_zpsnthzcn1k.jpg.html)

Kiquee71

02-14-2014, 01:28 PM

I no longer need the 335/30RZ18, found a Perrelli Zero something in San Diego and will be delivered on Monday :) Can't wait to get this fat tire under there and see
if all clears. Then I can finish the drivers side, check that side and time to order the wheels & tires. Slow progress but enjoying every minute it. Thanks everyone.

Kiquee71

02-17-2014, 09:09 PM

This is not much of of an update, but wanted to show you guys what the tire looks like under car. Also have some questions for all who are running this size tire & wheel combo. Going to post this over at the tires & wheels section too. Ok the tire is a 335/30RZ18 Pirelli Rosso, it measures side wall to side wall 14-1/8" without the wheel mounted. Stuck it under the car and have a little under a 1/4" on each side of the side walls. My question is when the wheel is mounted to the tire does it suck in the side walls a little bit? Does anyone have a true side wall measurement with 335/30RZ18 from BFG KDW2 or BFG Rivals & 18x12 wheel mounted together? This measurement would help with my decision to stay with this tire or go down to a 315/30RZ18. Any info would be great. Thanks.

Update: sorry I accidentally deleted these pics, but the tire in question wasn't was I was going with. I have some pics in my other posts that I've updated showing what I will be going with.

Ben@SpeedTech

02-20-2014, 01:18 PM

Wow, that sucker looks super fat! Yes wheel width will affect sidewall "section" width. We have dealt with different mfgs for tires and the same tire, say a 315, is an actual different width between each one. We've used Michelin, Nitto, and Falkens lately. Personally I've just gone to the mfgs website and looked up tire size dimensions to make the best guess. Tirerack.com is also a pretty good resource for this. Make sure you're comparing apples to apples, i.e. look at the measuring rim, such as a 315 on an 11" rim. Also remember their [315] width is measuring sidewall to sidewall, not tread width. Hope this helps a bit.

Ben@SpeedTech

02-20-2014, 01:42 PM

Jay has BFG G Force T/A KDWs (flame style tread) on his 73 Camaro, 18x12 Forgelines with 335/30/18s and they measure right at 13" sidewall to sidewall using our tire machine's calipers. They look really wide. Here's a link to a couple photos... Speedtech Performance Photo Gallery; Jay's 73 Camaro (http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=292/category_id=7/home_id=-1/mode=prod/prd292.htm)

On the other hand Blake's 315-30-18 Falken Azenis' on 18x11.5 Forgeline wheels measure right at 12" wide sidewall to sidewall with the same calipers and clearly don't look as wide. Technically a 315 should only be 2 centimeters thinner than a 335, but wheel size and tire mfgs inability to read a ruler the same make for different real world overall widths.

Kiquee71

02-21-2014, 02:50 PM

Ok, I've gotten a few responses from members with measurements regarding the various 335/30/18 sizes out there. Have to say thanks to all that responded because I've decide to stay with the 335's after all and when work slows down going to finish up mini tubes and start ordering my wheels and tires. Want to share with everyone what I found out so they don't go through what I've been going through wondering if or not are they going to fit. Have four brands so you guys make your decision in what to run.

1) BFG TA KDW 335/30/18 with
18x12 wheel mounted side wall
to side wall comes in at = 13 1/8
+-
2) BFG RIVALS 335/30/18
w/18x12 wheel side wall to
side wall comes in at = 13 1/8 +-

* these two above now are on back order and hard to come by now a days :( which bites

3) Michelin Pilot Sport
335/30/18 without
wheel side wall to side wall comes
in at = 13 1/8 +-
* this tire is available but is on the pricey side and have many sizes available like 265mm, 275mm for the fronts.

4) Pirelli P Zero Rosso
335/30/18 without wheel side
side wall to side wall comes in
at = 14 1/8 +-
* really WIDE tire for those who can fit it :)

Anyways hope this helps others cause it really helped me out. Until then.

Bad94

02-21-2014, 05:18 PM

Kiquee71

02-21-2014, 05:46 PM

I had a 335/30/18 KDW on my car and they were 13 1/8" on a 12" wheel. Then I mounted a 335/30/18 Rival on the 12" and its 13 1/2" so I now have 315 on a 12" and it 13 1/8"

That's what I'm talking about, how you go from one tire to the other and it can mean you going to a smaller tire. One of the members that chimed in was using the BFG Rival on a 12'' rim that measured 13 1/8'', hmm guess rims play a role in this too. Thanks for sharing Bad94, would like to see some pics of your ride.

rchaskin

02-21-2014, 06:05 PM

This is an awesome build.

Some of you guys make bodywork look like a 3yr old could do it.........

Bad94

02-21-2014, 06:29 PM

That's what I'm talking about, how you go from one tire to the other and it can mean you going to a smaller tire. One of the members that chimed in was using the BFG Rival on a 12'' rim that measured 13 1/8'', hmm guess rims play a role in this too. Thanks for sharing Bad94, would like to see some pics of your ride.

Here my build thread.
https://www.pro-touring.com/threads/82365-My-turn-at-a-project

Kiquee71

02-21-2014, 06:44 PM

This is an awesome build.

Some of you guys make bodywork look like a 3yr old could do it.........

Let me tell you rchaskin, this is not bodywork lol this is metal fabrication and I can handle that. Now working with wood, I'm lost. The real bodywork I will leave to the guys that do it so well, they make it look so easy.

Bad94, I remeber reading you build :) awsome. Your build made me think that if he can do it, so can I lol.

Kiquee71

04-20-2014, 05:02 PM

I know I've been out of the scene with this project, but work finally slowed down. I was able to finish the wheel tubs and I must say after all the work involved my triceps, biceps and wrists had enough working that grinder in that small space lol. Also have the Ridetech fuel fill cap on its way so I can fabricate that in place and going to start on deleting the side marker lights. Sometime next week going to talk to a guy about some wheels and have to say making a decision on wheels suck. Oh I've included a teaser pic of some mock up tires. Happy Easter

https://static1.pt-content.com/images/pt/2014/04/C2D48536271C433791537048D6C8AEC2_zpsafxo-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C2D48536-271C-4337-9153-7048D6C8AEC2_zpsafxol6vr.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/A40179CB74F74E878CEF3ADF4979CFEC_zps85qh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A40179CB-74F7-4E87-8CEF-3ADF4979CFEC_zps85qhhqhk.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/EB6C19CC7F654D30B344510339B79883_zpskpji-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EB6C19CC-7F65-4D30-B344-510339B79883_zpskpjipaxh.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/261E8E4A8A3747E186ADCA7FCE54B979_zpslrrk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/261E8E4A-8A37-47E1-86AD-CA7FCE54B979_zpslrrknz0i.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/1A2E4B323D444A4CB280C7CC5EF48BA2_zpsbgmp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1A2E4B32-3D44-4A4C-B280-C7CC5EF48BA2_zpsbgmpwdjf.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/11C138345B4F4D3599DBD24AE5F8A3F7_zpsx60u-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/11C13834-5B4F-4D35-99DB-D24AE5F8A3F7_zpsx60uwvji.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/690A958F2CE147DC8DD2C3EEC5449559_zpsnwq8-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/690A958F-2CE1-47DC-8DD2-C3EEC5449559_zpsnwq8gs1k.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/399AB9774C744A4EAF16E88415EB0A49_zps2a0e-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/399AB977-4C74-4A4E-AF16-E88415EB0A49_zps2a0eu6w8.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/D69C09C0C4284EAB8C74EBDD04FA3DA0_zpsx675-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D69C09C0-C428-4EAB-8C74-EBDD04FA3DA0_zpsx675jzv4.jpg.html)

MrQuick

04-20-2014, 08:39 PM

looking good!!

tom091074

04-20-2014, 10:54 PM

Looks great! Keep up the good work. I've been trying to build mine for 7 years and life is always getting in the way. Hope mine turns out as nice as yours is.

Ben@SpeedTech

04-21-2014, 06:34 AM

Yeaaaah buddy! Looks fantastic Big meats are a good thing!

Kiquee71

04-21-2014, 08:39 AM

Thanks you for the compliments.

I understand what you mean Tom091074, I don't think anyone can avoid those life's moments when you have to put things on hold. Have patience, don't lose that drive and you'll have yourself a nice ride.

Hey Ben, yea the tires look awesome under there. After cleaning out my garage of all that metal, dust and trash I decided to throw the tires underneath :) Tires are 325/30/19 and fit really good. I hope that when I speak to the wheel guy that I settle on a wheel. Will see.

tom091074

04-22-2014, 02:34 AM

Kiquee71

04-22-2014, 05:24 AM

So you are running the 325/30/19 now? What's the width of those off rim? I'm going in the morning to get a set of 335/30/18's and I'd like to run the 345/30/19 if possible, just curious as to what the difference is between the ones you have listed and the ones in the pictures?

Yes I'm going with the 325/30/19 cause the guy I'm going to be dealing with about the wheels only make 19" wheels and above. I bought some old tires that you see in the photo from a guy who took them off his Z06 corvette, they are Goodyears and they measure 13-1/2" side wall to side wall and no wheel. They fit with about 1/2" clearance on each side, I'll be running a 19x11.5 wheel with Michelin PSS tires. Not sure about the 345/30/19. The difference is the diameter of wheel I'm going with, that's all. Hope this helps.

tom091074

04-22-2014, 07:03 AM

I just bought a set of 335/30/18s like new cheap so I'll make them fit and run 18s. I'll measure them when I get home.

Kiquee71

04-22-2014, 08:03 AM

I just bought a set of 335/30/18s like new cheap so I'll make them fit and run 18s. I'll measure them when I get home.

Hey Tom, glad you got a good deal on them. what brand are those tires you bought? Let us know what those measurements are.

tom091074

04-22-2014, 10:55 AM

They are pilot sport ps2's and I'm getting 14 1/8 not mounted sidewall to sidewall.

Kiquee71

04-22-2014, 11:27 AM

That's a fat tire you got there Tom. One of the first used tires I bought for mock up was a Pirelli
Rosso 335/30/18 and it also measured 14 1/8" with out wheel. Didn't have 1/4" clearance even with the extra metal I cut out for the mini tubs. Let us know how they turn out for you.

tom091074

04-22-2014, 07:30 PM

94453 This is one of the tires with my big fat hand on it to give you an idea of how big it is.

Kiquee71

04-22-2014, 07:54 PM

94453 This is one of the tires with my big fat hand on it to give you an idea of how big it is.

LoL yea that sucker is FAT haha the tire Tom the tire ;) your tire is 5/8" wider than the 325/30/19 tire I'm using to mock up my setup. They do look sweet tho :cool:

BuddyP

04-22-2014, 08:42 PM

Very nice work so far!

tom091074

04-23-2014, 02:32 AM

I was looking through the forum and ran across this might help with your wheel sizing.

http://www.rimsntires.com/specspro.jsp

Kiquee71

04-23-2014, 05:41 AM

Thanks Tom. I have checked it out before and it does give me a pretty good idea of what to go with. I'm meeting with my friends wheel guy today to discuss making me some wheels, he says he can make the style I want. Will see how things go later.

Ben@SpeedTech

04-23-2014, 06:41 AM

Whew! That's a fat dude, the tire that is ;). Killer!

tom091074

04-25-2014, 01:17 AM

Any news on those wheels?

Kiquee71

04-25-2014, 07:22 AM

Any news on those wheels?

Nope, been busy with work. I'm going to speak with him today tho :D I will let you know later how things go with the discussions. I will be ordering my EFI fuel tank, fuel pump, sending unit, brackets, hose, filter regulator from Tanks Inc today :)

Ben@SpeedTech

04-25-2014, 07:51 AM

Thanks for the link Tom!

Kiquee- Although these wheels may not be close to what you're after, but I thought I'd share some pics of a Nova we just wrapped up in the shop. Maybe some motivation for you but also a great illustration of what stance, wheels, and tires can do for a car. Can't wait to see what you're getting!

This car came to us like this with mostly stock suspension and 17" TTs.

https://static1.pt-content.com/images/pt/2014/01/68Nova01_zps5fd4d17a-1.jpg

After a complete suspension overhaul and wheels and tires...

https://static1.pt-content.com/images/pt/2014/04/68Nova40_zpsf2eba0fb-1.jpg

https://static1.pt-content.com/images/pt/2014/04/68Nova41_zps2e9de19d-1.jpg

https://static1.pt-content.com/images/pt/2014/04/68Nova42_zps8f062fd5-1.jpg

mrx

04-25-2014, 02:22 PM

Kiquee:

Looks like a great project......

I am local to you (Irvine), and a Nova guy. Would love to come check out the project some time.

Mike

Kiquee71

04-25-2014, 02:32 PM

Thanks Ben for those pics, I've been following that build :). Anyways ordered my EFI tank, fuel pump, and other stuff that goes with it so I can finish the fuel cap fab work. Also finished up talking with the guy about my wheels ;) it's a done deal. Gave them a pattern I wanted and they are going to build it for me. They are Rugotti Forged Wheels 19x11.5 rears, 19x9 fronts wrapped with Michelin PSS 325/30ZR-19 - 265/35ZR-19 tires. Satin Black Centers, polished dish & lip, hidden valve stem. Will be made to fit ZO6 front & rear brakes & calipers. It will be about a couple of weeks till they are done. Can't wait lol. Will post more and pics when I get some to put up.

Kiquee71

04-25-2014, 02:35 PM

Kiquee:

Looks like a great project......

I am local to you (Irvine), and a Nova guy. Would love to come check out the project some time.

Mike

Hey Mike, thanks. That wouldn't be a problem, just get up with me and we can set something up.

tom091074

04-26-2014, 02:23 AM

Rugotti wheels, looks like they do some high end stuff. Nice! I can wait to see the finished product.

Kiquee71

04-27-2014, 04:33 PM

Started on the fuel fill cap this weekend, waiting to get the gas tank to finish the rest of the plumbing. The fuel fill cap came out ok, but the guys who are going to do the body work will love me lol. Not bad for the first time. More to come later.

https://static1.pt-content.com/images/pt/2014/04/5567C8D9EBDD45EF9F2A0EA35BD97183_zps0gy3-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/5567C8D9-EBDD-45EF-9F2A-0EA35BD97183_zps0gy3u83y.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/D97737EECAA64C6D9CD8502FC99FC282_zpsytee-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D97737EE-CAA6-4C6D-9CD8-502FC99FC282_zpsyteeb5ll.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/A4C129B62D3C4670967A1B8DD9858926_zpsd7wo-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A4C129B6-2D3C-4670-967A-1B8DD9858926_zpsd7wossfn.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/EB03808C1606462AA0D0B8B97A4ACCB8_zpsvktc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EB03808C-1606-462A-A0D0-B8B97A4ACCB8_zpsvktcdnpl.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/586062A1AD3B42649964457034BB5FFE_zpsoqu7-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/586062A1-AD3B-4264-9964-457034BB5FFE_zpsoqu7iocb.jpg.html)

https://static1.pt-content.com/images/pt/2014/04/E4192E3F09464303BE3082E2DDA294D4_zpsvoap-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E4192E3F-0946-4303-BE30-82E2DDA294D4_zpsvoaphwbh.jpg.html)

tom091074

04-27-2014, 07:37 PM

Looks better than I could do. lol

Kiquee71

05-02-2014, 02:57 PM

A little update for now, new rubber came in so I took them to the wheel shop. :)

https://static1.pt-content.com/images/pt/2014/05/3E9A87868ADC4A8FB0991806B86DD8D4_zpshfwk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/3E9A8786-8ADC-4A8F-B099-1806B86DD8D4_zpshfwksrdm.jpg.html)

Also they finished up the centers of the wheels and on their way to get drilled and powder coated. Looks like sometime next week they should be done. Have to say after seeing the centers I can't wait that long. LOL. EFI tank will be here tomorrow, things have busy so haven't had time to work on the Nova. Will keep updating as soon I can.

FRENCHBLUE72

05-03-2014, 11:35 AM

Cant wait to see some wheels..

Ben@SpeedTech

05-05-2014, 06:47 AM

Awesome!

tom091074

05-12-2014, 10:34 PM

Anything on your wheels yet?

Kiquee71

05-13-2014, 02:57 PM

Ok update on the wheels. They are done and I received a photo from them of one of the wheels. They look sweet. So I went down to pick them up today, the back spacing on the fronts were not right so I left them to have them corrected. I have the rears with tires mounted, but I won't be able to post any pics till later tonight. So here is the photo of the wheel. What do you guys think?

https://static1.pt-content.com/images/pt/2014/05/7754217723B74EFA9CAC54ED9FE59B89_zpsqgx6-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/77542177-23B7-4EFA-9CAC-54ED9FE59B89_zpsqgx65tuj.jpg.html)

mrx

05-13-2014, 06:14 PM

I think they are bitchin - love the color. Anxious to see them with a side view shot of the car......Mike

Kiquee71

05-13-2014, 08:13 PM

Ok finally got them home and took some snap shots. Like I mentioned before the fronts are being redone, with the rears I can start taking measurements for the new rear end, Z06 brakes & suspension. That will be the next phase, I'm waiting on some parts to finish the fill fuel cap plumbing to the gas tank and then fill in the side marker lights with some sheet metal. Ok here are those photos of the rear wheels.

https://static1.pt-content.com/images/pt/2014/05/7B95FE2E69ED4005BC57654ADF52D398_zpsnhv1-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/7B95FE2E-69ED-4005-BC57-654ADF52D398_zpsnhv1rizu.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/89CF37122A99485FAC5FB77FDA0EBA69_zpsjzcx-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/89CF3712-2A99-485F-AC5F-B77FDA0EBA69_zpsjzcxifgw.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/7EB6808898F149AC97A2410667D9F897_zps5anq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/7EB68088-98F1-49AC-97A2-410667D9F897_zps5anqxcll.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/4B00054DB694430ABF3ECF39B48D4748_zpszmnx-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4B00054D-B694-430A-BF3E-CF39B48D4748_zpszmnxohpz.jpg.html)

Kiquee71

05-13-2014, 08:16 PM

I think they are bitchin - love the color. Anxious to see them with a side view shot of the car......Mike

By the way Mike that color in that first photo is Satin Black but with the lighting in their shop, flash etc it gave it that somewhat gold color to it lol. Cool huh

sinistir

05-13-2014, 09:26 PM

very kool build.

tom091074

05-13-2014, 10:26 PM

Nice!

Ben@SpeedTech

05-14-2014, 06:33 AM

Very cool. It's nice to see something a little different, and the styling looks great! Good on ya!

rchaskin

05-14-2014, 07:06 AM

Cool.
Reminds me of the Lamborghini Countach wheels.

Kiquee71

05-16-2014, 12:39 PM

Cool.
Reminds me of the Lamborghini Countach wheels.

Hey Randy, yes they do look like them lol. Didn't even think about it when I was discussing the pattern for the wheels. I'm not much a big fan of the spoke wheels, kinda old school of the weld wheels look is what I was after. Will see how she looks when all put together down the road.

Kiquee71

05-17-2014, 09:30 PM

A little update, finished the plumbing from fuel fill cap to the fuel tank. Will be getting started on filling in the side lights and small miscellaneous holes. Will be looking to be ordering Kore3 big brakes and the suspension real soon :) more to come later.

https://static1.pt-content.com/images/pt/2014/05/9E28F48B2385484D88D74CD709B23AC7_zpsssyp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9E28F48B-2385-484D-88D7-4CD709B23AC7_zpsssypn01f.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/8E16A9F22D594158814B5C5FE70AB95B_zpswwwk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8E16A9F2-2D59-4158-814B-5C5FE70AB95B_zpswwwkxjej.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/FB2C2D84B3414BA28F3CEDD0B490208C_zpsteoc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FB2C2D84-B341-4BA2-8F3C-EDD0B490208C_zpsteocwrjz.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/527B5BB42F544FEA96088CA528BD6F1A_zpswmrk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/527B5BB4-2F54-4FEA-9608-8CA528BD6F1A_zpswmrkqzxi.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/AC01B3B97E8443899F44E6B2C18B712E_zpshqwg-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/AC01B3B9-7E84-4389-9F44-E6B2C18B712E_zpshqwgatgd.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/DD49AD1F04FB439DBD7D882A1FB5007F_zpsotpc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DD49AD1F-04FB-439D-BD7D-882A1FB5007F_zpsotpcqjya.jpg.html)

Kiquee71

05-23-2014, 08:22 PM

So here is what I've been up too lately. Finished up filling in the side marker lights and holes along the body. Like I mentioned before the body shop guys are going to love me lol. Talk to Tobin at Kore3 and put my order in for my Big brakes Z06 brakes, rotors and hoses. Soon as they get here will be taking my measurements for my 9" rear end & suspension from SpeedTech and front suspension from RideTech. Things are moving along quite well and looking forward to some deliveries lol.

https://static1.pt-content.com/images/pt/2014/05/2114296D33034239B1C39677FC9F4BD8_zpsqhln-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2114296D-3303-4239-B1C3-9677FC9F4BD8_zpsqhlnbh8c.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/9BEB7D81777D448A872824A55F788FCC_zpszf1e-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9BEB7D81-777D-448A-8728-24A55F788FCC_zpszf1eoiye.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/94E629BF7FFA499C94C9B1FB4A930661_zpsn66p-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/94E629BF-7FFA-499C-94C9-B1FB4A930661_zpsn66pacew.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/013FDC8E17A543BC97CD992337BC65E0_zpset5x-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/013FDC8E-17A5-43BC-97CD-992337BC65E0_zpset5xxsgu.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/58C4B09B698E4EB18AD1CF1C631C44E1_zpsayh9-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/58C4B09B-698E-4EB1-8AD1-CF1C631C44E1_zpsayh9vaiz.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/FB7DB2EB76D04E129B8F63BC469D9809_zpssffq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FB7DB2EB-76D0-4E12-9B8F-63BC469D9809_zpssffqantm.jpg.html)

https://static1.pt-content.com/images/pt/2014/05/6BE67AC26B6F41378D39B9F0BC28B727_zpsftad-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/6BE67AC2-6B6F-4137-8D39-B9F0BC28B727_zpsftadokio.jpg.html)

SRD art

05-27-2014, 06:41 AM

Cool. That'll be nice to see things smoothed out!

Kiquee71

06-09-2014, 11:02 AM

A little update for now. I've order my brakes with Kore3 and waiting for them to be delivered :) I will be getting to the suspension soon after I receive the brakes. Been also working on cleaning up my LY6 for paint, cam swap, since I'm waiting for things to come in. I will be attending the USCA this weekend at Auto Club Speedway in Fontana, that's going to be fun to watch. Hope to speak with RideTech guys about their stuff while I'm there. Here are a few pics of what I've been up too. More to come later.

https://static1.pt-content.com/images/pt/2014/06/21D6E498C68447AFBF742AACC135D377_zps9yb8-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/21D6E498-C684-47AF-BF74-2AACC135D377_zps9yb8dqfr.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/BD288BFD3D08438CB190251A3C675C71_zpsou90-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BD288BFD-3D08-438C-B190-251A3C675C71_zpsou90eild.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/42EB376C98044BEDB2014817B96CB8D0_zpsofrx-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/42EB376C-9804-4BED-B201-4817B96CB8D0_zpsofrxdqve.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/8E01350E12B94A38BD6E91B4B915903C_zpsalo2-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8E01350E-12B9-4A38-BD6E-91B4B915903C_zpsalo21e6n.jpg.html)

Kiquee71

06-16-2014, 08:25 PM

Well had a good time at the Optima USCA event at Auto Club Speedway for Fathers Day with my son. Seen a lot of nice cars and met some cool peps too. Only thing that was a bummer was that RideTech wasn't there with a booth :(. I've been getting the block ready for paint, ordering parts and more parts and more parts lol. Kore3 brakes arrived this past Sat and all I got to say is wow. Here are some pics we took at the event.

https://static1.pt-content.com/images/pt/2014/06/0A0DE1B7027D44FC9F4FB047E4D4C850_zpsohb9-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0A0DE1B7-027D-44FC-9F4F-B047E4D4C850_zpsohb9mm6d.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/461D72C88FE342789E76BBB4B7E87C29_zpsxuqv-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/461D72C8-8FE3-4278-9E76-BBB4B7E87C29_zpsxuqvt2ym.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/014589F0E2C844A08844FFB5AF698D53_zpsguaq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/014589F0-E2C8-44A0-8844-FFB5AF698D53_zpsguaqtdam.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/E5757887F72049589534C071D4EDF37A_zpsq9ab-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E5757887-F720-4958-9534-C071D4EDF37A_zpsq9ab2mir.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/23706B677FF743739AC017573E25456B_zpsrgi4-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/23706B67-7FF7-4373-9AC0-17573E25456B_zpsrgi4cdza.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/4D5B4D5466544616928A435C09D435ED_zpsz5i6-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4D5B4D54-6654-4616-928A-435C09D435ED_zpsz5i6qrw4.jpg.html)

Kiquee71

06-25-2014, 01:45 PM

A little update for now. Like I mentioned in my previous post my focus has been cleaning up the engine, prep, paint has been finished. Ordered my SS3 cam kit, tune, intake porting and converter from GPI ( Gwatney Performance Innovation) and I have to say Ryan has been great to deal with even with all my questions I throw at him. Also waiting for gaskets to come in so I can put it all in and have the motor ready for mock up in the frame. I have a valve spring remover tool that I used on my 2002 Tahoe, but it doesn't fit on my L92 heads. So I made some new bottom bases, one 1/4 & 3/8 thick just in case one didn't work. In the photo on the right is the old version and the ones on the left are the new ones I made.

https://static1.pt-content.com/images/pt/2014/06/209066760D694CB8B4E308651182DAA7_zpsfn1s-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/20906676-0D69-4CB8-B4E3-08651182DAA7_zpsfn1sabjp.jpg.html)

Kiquee71

06-25-2014, 02:18 PM

Here are my Z06 big brakes from Kore3, and also Tobin is excellent to deal with, great guy and knows his brakes.

https://static1.pt-content.com/images/pt/2014/06/D9F8865D7D484A118BF8D9598CFAA5B5_zpsrfpd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D9F8865D-7D48-4A11-8BF8-D9598CFAA5B5_zpsrfpdnoc9.jpg.html)

Also been doing some interior shopping and picked up a set of front GTO seats and rear seats for the nova. They do look good in there lol :)

https://static1.pt-content.com/images/pt/2014/06/2DECE4324A6D47C8A6A61F6373B45D36_zpsfcjf-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2DECE432-4A6D-47C8-A6A6-1F6373B45D36_zpsfcjf7szw.jpg.html)

https://static1.pt-content.com/images/pt/2014/06/35B98C7E8AD84584BA308A9E8F4AA740_zpsoopp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/35B98C7E-8AD8-4584-BA30-8A9E8F4AA740_zpsooppfu7f.jpg.html)

So for now I'm waiting for the engine stuff and then move back on to ordering the suspension. Until then my son and I are off to NY for the weekend for a little R&R and to catch a baseball game :)

scherp69

06-26-2014, 02:40 PM

Kiquee71

06-26-2014, 08:28 PM

Looking good. Keep up the good work. I notice you don't have bucket seat floor brackets. If you were thinking of putting some in, I have some our to a SS car that I'm selling. There's an ad in the classifieds if you're interested.

Thanks Mike, but already went and bought them brackets you are referring too. Thank you by the way, your build has been very inspiring and helpful. Can't wait till finishing up this project.

Kiquee71

07-12-2014, 07:05 PM

A little update for now. Received some of my Speedtech torque arm suspension yesterday, very nice. The rest of the rear and front suspension
is on its way. Also waiting for headers, motor mount plates, third member to get here. Got underneath the car today to install the frame braces and rear crossmember for the torque arm, my 9" rear differential is also on order.
It's coming along real nice, soon will have it rolling on its wheels :)

https://static1.pt-content.com/images/pt/2014/07/465BFFED8A474DFCA79357425989C640_zps4moy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/465BFFED-8A47-4DFC-A793-57425989C640_zps4moyctwl.jpg.html)

https://static1.pt-content.com/images/pt/2014/07/7006E56AB5B54644BBC77BDA950E0847_zpsog4p-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/7006E56A-B5B5-4644-BBC7-7BDA950E0847_zpsog4pcdom.jpg.html)

Auto Rod Technologies

07-12-2014, 07:41 PM

I think those wheels are going to look killer on the car when finished.. Something different.

Kiquee71

07-13-2014, 12:31 PM

I think those wheels are going to look killer on the car when finished.. Something different.

Thanks man appreciate the comment. Not to far away from getting them mounted to the car. Waiting for parts to arrive sucks :cool: lol

Ben@SpeedTech

07-14-2014, 06:50 AM

Thanks man appreciate the comment. Not to far away from getting them mounted to the car. Waiting for parts to arrive sucks :cool: lol

Waiting on the brown Santa truck is always the worst! ;) Give us a call if you have any questions with the install. :) Can't wait to see it on it's feet again!!

Kiquee71

07-27-2014, 05:01 PM

Been awhile since I've updated on the Nova, work has been busy. Well I've got the new cam, springs, pushrods, cam phaser kit, oil pan, timing cover all put together :) It's ready for mocking it up in the frame so I can see where to notch the frame, fit headers and the front suspension. I have almost everything for the suspension except for the 9" rear end, steering box and rear coil overs.
I'll put up some more when work slows down hehehe.

https://static1.pt-content.com/images/pt/2014/07/405B0137065849D08A4E24B7D35F2475_zpsxewb-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/405B0137-0658-49D0-8A4E-24B7D35F2475_zpsxewbsl1l.jpg.html)

https://static1.pt-content.com/images/pt/2014/07/BEC281C8429E4CA4AD12BA0E470FFB4D_zpsth7q-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BEC281C8-429E-4CA4-AD12-BA0E470FFB4D_zpsth7qmezy.jpg.html)

https://static1.pt-content.com/images/pt/2014/07/D22DFA576DCA4968AFF8BFD39A1B2502_zpskyla-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D22DFA57-6DCA-4968-AFF8-BFD39A1B2502_zpskylaitts.jpg.html)

tom091074

07-27-2014, 07:51 PM

:twothumbs

dangina

07-29-2014, 02:54 AM

https://static1.pt-content.com/images/pt/2014/07/D22DFA576DCA4968AFF8BFD39A1B2502_zpskyla-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D22DFA57-6DCA-4968-AFF8-BFD39A1B2502_zpskylaitts.jpg.html)

looks like christmas came early!

Kiquee71

08-23-2014, 07:41 PM

Hey everyone, just a little bit of an update here on the Nova. Got started
on the frame notching on my subframe for the Hooker motor mounts kit, cause I'm using the 302-1 oil pan that has the ability to be stroked out for more cubic inches :). The headers fit great, they don't even hang below the subframe rails after I set the 3 deg down as per instructions. Went to put on the Lee's power steering box and it wasn't the right box :( Have picked up the Currie rear end and now need to have the axles bearings pressed on so I can start on the rear suspension. Things should start coming together here now since I have everything now to make it a roller vehicle. More to come later.

https://static1.pt-content.com/images/pt/2014/08/1EE176CE958F42698B8ACBBA675B3314_zpsuqwh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1EE176CE-958F-4269-8B8A-CBBA675B3314_zpsuqwhymwd.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/305A03E1E65744A7B45C8A771311EF64_zpsqynd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/305A03E1-E657-44A7-B45C-8A771311EF64_zpsqyndaidk.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/6F6B844653844714A8E1EAA666ABF66F_zpsrzgn-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/6F6B8446-5384-4714-A8E1-EAA666ABF66F_zpsrzgnbtmy.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/4DB3B271E2624FAA9AA4F1F803F9F394_zpsvdh7-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4DB3B271-E262-4FAA-9AA4-F1F803F9F394_zpsvdh7hylo.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/FC2968FE7A1D4463BC67DDD64763414E_zpsh3st-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FC2968FE-7A1D-4463-BC67-DDD64763414E_zpsh3strquz.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/44F604BA24B54A38A00D85C74F4D163B_zpszzsu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/44F604BA-24B5-4A38-A00D-85C74F4D163B_zpszzsuut0v.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/681121DF40554E2A9CE68F12D366D3B4_zpshmws-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/681121DF-4055-4E2A-9CE6-8F12D366D3B4_zpshmwsliru.jpg.html)

Kiquee71

08-24-2014, 08:08 PM

Got around to doing some more on the car today. I put the subframe on using Speedtechs aluminum solid mounts, it lined up great. Had the 3rd member painted and installed in the housing along with the torque arm pinion support. Started mounting the lower & upper control arms and had a issue with one of the upper arm shaft threads which got stripped when installing the lock nut ugh :(. Took care of that and called it a day. Getting bearings pressed on the axles at the end of the week so I can get going on the rear. Going to have to send the steering box to Lee's to get the right box that bolts up. Never ending issues lol

https://static1.pt-content.com/images/pt/2014/08/35805AEEACDA411C8DC7E56C001111D3_zpss4rw-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/35805AEE-ACDA-411C-8DC7-E56C001111D3_zpss4rwcjr3.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/6A79769DF70948EFA971E986C77B333E_zpsrocm-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/6A79769D-F709-48EF-A971-E986C77B333E_zpsrocmhgz9.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/EE45F5F60F544737ADAFE1DC00DE619E_zpsgtuy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EE45F5F6-0F54-4737-ADAF-E1DC00DE619E_zpsgtuygcdq.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/B9BBD694CAC54D52AC673B9531AC77D8_zpshpdv-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B9BBD694-CAC5-4D52-AC67-3B9531AC77D8_zpshpdvi1cl.jpg.html)

Kiquee71

08-30-2014, 08:58 PM

Ok got some more things done today. The deal with steering box was my mistake. Didn't give it enough time trying to install it, due to a 7 year old telling me how bored he is lol. Steering box fits like a glove :). Had the bearings pressed on the axles, took tranny in to have my guy go thru it. He called back says all look ok, but need some new clutches. Started on the rear suspension, got it hung in there and lined it up. As usual things don't bolt up like they are supposed to, so a little grinding, welding and drilling got it to fit. That's as far as I got today. Tomorrow my plan is get coil overs set up, put on the axles and rear brakes. Well that's the plan hehehe more pics to come later.

https://static1.pt-content.com/images/pt/2014/08/B303AAD54C1047B681D9711054A7D394_zps1ese-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B303AAD5-4C10-47B6-81D9-711054A7D394_zps1esebu7c.jpg.html)

https://static1.pt-content.com/images/pt/2014/08/80D827A2CBE248619AE98B8273C57FD5_zpso2vj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/80D827A2-CBE2-4861-9AE9-8B8273C57FD5_zpso2vj8xcf.jpg.html)

Kiquee71

09-01-2014, 03:36 PM

Well the rear is done for the mocking up phase whew, my body is pretty beat up lol. I'm thinking
of purchasing some 3/16 wheel spacers cause I still have lots I room under there to go a little to the outside. Next on the agenda is get the front suspension put together, wheels on and drop engine & trans in. That's it for today, time to relax BBQ & some cold ones.

https://static1.pt-content.com/images/pt/2014/09/A0EB51F84D6F4421984D2BA3C233328E_zpsrsuk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A0EB51F8-4D6F-4421-984D-2BA3C233328E_zpsrsukmbqc.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/052ED169F0284EBB8F9464F84CADAF0F_zps5iqy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/052ED169-F028-4EBB-8F94-64F84CADAF0F_zps5iqy9rfc.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/56D4B5C94FAF45BEBDAABB6E3D554F83_zpsubxu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/56D4B5C9-4FAF-45BE-BDAA-BB6E3D554F83_zpsubxuwvth.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/7B0A587E0DD14E7AA4E889426E99169F_zpsbzrp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/7B0A587E-0DD1-4E7A-A4E8-89426E99169F_zpsbzrpygdx.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/041311DE20014D75B4797C81ABB2A889_zpsuerq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/041311DE-2001-4D75-B479-7C81ABB2A889_zpsuerqyhzv.jpg.html)

Ben@SpeedTech

09-02-2014, 07:16 AM

Looks killer! Great stance and wide meats make all the difference.

On the spacers, I'd avoid the cheapie universal mr gasket ones from the autoparts store. From my experience they're difficult to center and throw off your wheel balance. I also had one crack and fall apart as I unbolted the wheel. There are two companies that I found here on the forum that make custom billet spacers, they're built to your width and are both hub and wheel centric so they are custom built specifically to your car. I got some at 10mm thick and paid $110 for a pair. In my opinion they were worth it. For a nicer not so custom to your vehicle and a little less expensive set, we get our universal billet spacers from Baer brakes. Give us a ring if we can help you with those.

The car is really getting there, on it's own 4 feet now. Keep it rockin'!

Kiquee71

09-02-2014, 08:33 AM

Thanks Ben, I will keep that in mind when looking for some spacers. It's almost on all 4's, haven't got to the front suspension done yet.

Kiquee71

09-15-2014, 08:39 PM

Little update on the progress on the Nova. Have the front suspension altogether now with the wheels on. Finally it's on all wheels and I can move it around a little easier. Boy do I need to add some shims on the upper control arms, tires have a lot of positive camber. I'll take a look at later after I install the motor and trans, so it has some weight to the front. I'll try to get it close later down the road and let the alignment shops handle the final specs.Then the next project is to make a trans mount and set the engine to the correct deg down. So far so good. Here are some photos.

https://static1.pt-content.com/images/pt/2014/09/B8684AEFE8F44068A0D10202A7757A29_zpsmcnj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B8684AEF-E8F4-4068-A0D1-0202A7757A29_zpsmcnjmnwn.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/2924301C39D74C86B80972D13BC7D3F3_zpsyloi-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2924301C-39D7-4C86-B809-72D13BC7D3F3_zpsyloipu1f.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/22C5D31D7EA64661AFA0527269782A34_zpsxkye-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/22C5D31D-7EA6-4661-AFA0-527269782A34_zpsxkyekuhd.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/5D181CDD83AD40BF8E79916CC17EBF0A_zpsepkd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/5D181CDD-83AD-40BF-8E79-916CC17EBF0A_zpsepkddj15.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/750DDE7B54D64E5DAD1E54DA2ABA1768_zpszngu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/750DDE7B-54D6-4E5D-AD1E-54DA2ABA1768_zpszngufvrc.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/17CE4756EC964F78AA1FB22294EED19A_zpsa84b-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/17CE4756-EC96-4F78-AA1F-B22294EED19A_zpsa84bsikp.jpg.html)

Ben@SpeedTech

09-16-2014, 06:42 AM

Ok, now I can officially say nice to see it on all fours. :)

Kiquee71

09-16-2014, 11:22 AM

Ok, now I can officially say nice to see it on all fours. :)

Yes, officially on all fours. lol Man so glad to get it to this point. :cool:

Kiquee71

09-27-2014, 08:45 PM

Ok, have the motor and trans in the Nova. I'm using Hooker LS conversion kits, motor mounts, headers and minus the trans mount. They currently don't have a trans mount for the 4L80E. So next on the list is custom trans mount, shorten trans dipstick tube from Madman. I also was checking steering and suspension travel and found out that the RideTech Tru-turn tie-rod end hits one of the headers tubes on the passenger side and come close on one on the drivers side. So I have to modify these headers to work with the True-turn. Trans tunnels needed to be opened up to fit this monster trans :), might be in my best interest to also raise the trans driveshaft tunnel a bit too. So I have some modifying to do in the weeks to come and then I can move on to the fabrication of the exhaust. More to come later.

https://static1.pt-content.com/images/pt/2014/09/9EE642CDB35D4599B46F958929D2AC14_zpsqtea-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9EE642CD-B35D-4599-B46F-958929D2AC14_zpsqteajkce.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/090F55E984CC47E1A66631C44E9694AC_zps8ic8-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/090F55E9-84CC-47E1-A666-31C44E9694AC_zps8ic8xp9w.jpg.html)

https://static1.pt-content.com/images/pt/2014/09/1A37159F22FC47639BF263EA9A1909E8_zpsy0gp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1A37159F-22FC-4763-9BF2-63EA9A1909E8_zpsy0gptgg8.jpg.html)

Kiquee71

10-25-2014, 09:13 PM

Little progress made on the Nova this past couple of weeks. Finished fabricating a trans crossmember which came out ok, it will do the job for sure. It will give much added clearance to help when fabricating the exhaust around the torque arm suspension. Also tweaked the trans dipstick I picked up from Madman, was too long for my taste. Up next is get driveshaft shorten, new u-joints and high speed balance. I've started making a list of things I'll need for the SS exhaust and will be picking them up soon. Until then for more updates.

https://static1.pt-content.com/images/pt/2014/10/9D69D13352BE404CB0BF99FF9E05F6E8_zpsqfve-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9D69D133-52BE-404C-B0BF-99FF9E05F6E8_zpsqfvewcdr.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/1B18F1E5C0EA48BC900AD9A9F1001653_zps8rjd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1B18F1E5-C0EA-48BC-900A-D9A9F1001653_zps8rjdppld.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/EF6E957C2E394C189CD78A0C260DF174_zpsebvy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EF6E957C-2E39-4C18-9CD7-8A0C260DF174_zpsebvynwfw.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/D64803BA312B48138B44DB99E2DC633C_zps4cv6-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D64803BA-312B-4813-8B44-DB99E2DC633C_zps4cv6zhhs.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/351E8C003DA64438BE73AD57D2DE7A53_zpsvsis-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/351E8C00-3DA6-4438-BE73-AD57D2DE7A53_zpsvsisvrgk.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/E2AC86EC6C164607AE949FAE16003409_zps3ioe-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E2AC86EC-6C16-4607-AE94-9FAE16003409_zps3ioezvzs.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/A3C33D839D2F4691958FBFA41FBCA544_zpsyu46-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A3C33D83-9D2F-4691-958F-BFA41FBCA544_zpsyu4671bq.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/7369277F1EF843BAA56FB14B98FCFE61_zpsni6e-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/7369277F-1EF8-43BA-A56F-B14B98FCFE61_zpsni6euhr7.jpg.html)

robertslx

11-01-2014, 02:10 PM

Nice Build , I'm working on a 73 Nova

Kiquee71

11-03-2014, 12:52 PM

Thanks Robertsix. Have fun with your build and if I can help out in any way with your build feel free to hit me up.

Kiquee71

11-06-2014, 11:53 AM

So, far the past week or so I've been working on installing the shorten drive shaft. Have my angles set and tunnel cut for driveshaft. Started with attaching together the trans tunnel brace with a little help from my son. He has pick up the mig welding really quick so he wanted to weld it up for me lol. It's wasn't bad at all too. Made up some templates for the trans tunnel and driveshaft tunnel. Next is transfer to 18 gauge sheet metal and form to fit. Tack everything and then final weld. Will post finished results soon. Will be off to the Long Beach Auto Swap-meet this Sunday to find some deals on items I'm looking for. More to come.

https://static1.pt-content.com/images/pt/2014/11/3DB68E9A5B52481E8C075601944A1839_zpshpgx-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/3DB68E9A-5B52-481E-8C07-5601944A1839_zpshpgxyjaf.jpg.html)

https://static1.pt-content.com/images/pt/2014/11/95CD5EB7AA134DEC8562E09DD51B66C2_zpsv79e-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/95CD5EB7-AA13-4DEC-8562-E09DD51B66C2_zpsv79evjtq.jpg.html)

https://static1.pt-content.com/images/pt/2014/11/D0802F5CB2684F2C8256ACA5EE8E660F_zpsuky8-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D0802F5C-B268-4F2C-8256-ACA5EE8E660F_zpsuky8ld1f.jpg.html)

https://static1.pt-content.com/images/pt/2014/11/246BA84216C4473EB1022C808A720082_zps0eoa-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/246BA842-16C4-473E-B102-2C808A720082_zps0eoaufm7.jpg.html)

https://static1.pt-content.com/images/pt/2014/11/DDBCB953A2A14DA3896A34D7E61A94DA_zpsi7yd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DDBCB953-A2A1-4DA3-896A-34D7E61A94DA_zpsi7ydsps1.jpg.html)

https://static1.pt-content.com/images/pt/2014/11/98BE5EC7B72D4C5C84780E227ABA07BE_zpsqzff-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/98BE5EC7-B72D-4C5C-8478-0E227ABA07BE_zpsqzffe457.jpg.html)

wheatie8252

12-03-2014, 09:56 AM

Is your subframe painted a flat black or is that just a sealer. Great looking build by the way.

Kiquee71

12-03-2014, 11:51 AM

Is your subframe painted a flat black or is that just a sealer. Great looking build by the way.

Thanks. The paint I used is just rattle can primer, I will have it powder coated when all the modifications are done and ready for paint.
Been busy at work and holiday stuff haven't had much time to work on the Nova. Have half the tunnel done, still more work involved. Been picking up parts too for my exhaust. Hope to have more of an update for you guys soon. Happy Holidays.

Kiquee71

01-21-2015, 08:28 PM

Well things have been busy for me at work since the holidays and have had very little time to work on the Nova. Tho I did manage to squeeze some time here and there to finish the trans & drive shaft tunnel. Also gathered up my material for my S.S. exhaust, also had to modify the x-pipe some for it to work in my setup. Not to long ago I received my reworked harness from BP Automotive and I must say very quality work from Bill. Hopefully when work slows down I'll have some photos of the exhaust mocked up under the car.

https://static1.pt-content.com/images/pt/2015/01/E796C075AFA24F2494E75B3FC0207D48_zpsamiw-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E796C075-AFA2-4F24-94E7-5B3FC0207D48_zpsamiwxphw.jpg.html)

https://static1.pt-content.com/images/pt/2015/01/AD60487D0558436DB869E0E6B327FE8A_zpsk3sv-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/AD60487D-0558-436D-B869-E0E6B327FE8A_zpsk3svjuez.jpg.html)

https://static1.pt-content.com/images/pt/2015/01/1062BBD1AE734A25887DA0A10B30D082_zpsojql-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1062BBD1-AE73-4A25-887D-A0A10B30D082_zpsojqlr9vn.jpg.html)

https://static1.pt-content.com/images/pt/2015/01/118AC893CFD548F8B85D3C5CFEB42369_zps2pls-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/118AC893-CFD5-48F8-B85D-3C5CFEB42369_zps2plssja8.jpg.html)

https://static1.pt-content.com/images/pt/2015/01/6D73EAB6314048AD9DA9BFD5892C2A09_zps9x9j-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/6D73EAB6-3140-48AD-9DA9-BFD5892C2A09_zps9x9jvkfp.jpg.html)

https://static1.pt-content.com/images/pt/2015/01/C952E2B24225428E91DA75AE2BCA3A20_zps2rop-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C952E2B2-4225-428E-91DA-75AE2BCA3A20_zps2ropesad.jpg.html)

https://static1.pt-content.com/images/pt/2015/01/CC12096260FF4D5CA2700DE9C39F19DD_zpshchb-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/CC120962-60FF-4D5C-A270-0DE9C39F19DD_zpshchbexqn.jpg.html)

https://static1.pt-content.com/images/pt/2015/01/D4FDCE314D4A45B794F2A55E43D0BF1D_zpsbfr2-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D4FDCE31-4D4A-45B7-94F2-A55E43D0BF1D_zpsbfr2qjuu.jpg.html)

Ben@SpeedTech

01-22-2015, 07:41 AM

Nice work!

Kiquee71

01-22-2015, 01:14 PM

Nice work!

Thanks Ben, it's been hard to try and do anything with work getting in the way of progress lol.

Ben@SpeedTech

01-22-2015, 03:22 PM

I think being independently wealthy is the best plan for motor heads. Then work wouldn't get in the way of our hobby, Lol!

king869

01-31-2015, 10:38 AM

Amazing build and progress! I have a 72 nova that I'm building we seem to have similar ideas, I have the ridetech front coil-overs and 4link set up, DSE mini tubs, but am thinking ls3 and 6 speed manual. I was wondering if you were going to put an after market AC in the car and if you knew how it would work with your blanked off firewall? Just started some more body mods and was thinking of doing it but want to have AC and wasn't sure if they would work together...

OneQuickCoupe

01-31-2015, 03:04 PM

Nice work on the trans and driveshaft tunnel. Dynamite build. Thanks for posting your progress. I have to fab a trans and driveshaft tunnel for my 64'. You have given me a lot of ideas.

FAT RAT NOVA

Kiquee71

02-01-2015, 09:25 PM

Thanks guys. king869 I do plan on running an aftermarket AC cause the car came with AC so that's the plan. I've seen aftermarket AC work with the smoothed out firewall, thanks to the other builds I've seen here on this forum. I'm not quite at that part of my build so I don't have much to say about it now.

Onequickcoupe thank you, I owe a lot of the work I've done to my Nova to all the projects on here that I have been following :) glad to be of some help to you on your build. Any question feel free to ask away.

king869

02-09-2015, 07:51 PM

Quick question. Is that fuel door the universal from ride tech?

Kiquee71

02-10-2015, 10:42 AM

Quick question. Is that fuel door the universal from ride tech?

No, it was the one for the Camaro from Ridetech. Had to modify & re-weld it so it will line up and go through below the trunk latch.

Kiquee71

02-15-2015, 06:34 PM

Like I mentioned from my previous posts that I was going to start on the exhaust. I'm running the RideTech front suspension with the TruTurn steering linkage and the passenger side tie-rod hits one of the header tubes. So this is where I began. I started by cutting out what was in the way and modified the tubes to clear. The driver side has one tube that comes really close, not to my liking so I'll be performing the same thing on the drivers side header. Until then I'll post up some more progress.

https://static1.pt-content.com/images/pt/2015/02/1851D20729C54FF1887A06D3631FB7DD_zps8gpg-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1851D207-29C5-4FF1-887A-06D3631FB7DD_zps8gpgsrhl.jpg.html)

https://static1.pt-content.com/images/pt/2015/02/75CE33ED74D54F129BB8433D7C08009D_zps72af-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/75CE33ED-74D5-4F12-9BB8-433D7C08009D_zps72afejjr.jpg.html)

https://static1.pt-content.com/images/pt/2015/02/8641D883D9A342F98DB30AFE1B031EF2_zpsqrni-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8641D883-D9A3-42F9-8DB3-0AFE1B031EF2_zpsqrnijkqk.jpg.html)

https://static1.pt-content.com/images/pt/2015/02/FD27E62D9983469AA4698362C1C7103F_zps4giu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FD27E62D-9983-469A-A469-8362C1C7103F_zps4giuvftu.jpg.html)

Kiquee71

03-01-2015, 10:43 PM

Ok got a little more work done today with the drivers side header. I've asked myself this question I come up with nothing, why build headers and then put a dent in one of the tubes so it clears another? Why not just take the extra time and route it so you don't have to put dents into the tubes jeez. Anyways I routed that tube away from the # 1 tube and made a little more clearance away from the tie-rod. Attached the SS Flex coupling and set it back into the car. Position the x-pipe in place and started to route the 3" SS exhaust pipes. I'm giving myself about 1/4" of clearance around the exhaust pipes for moment or expansion. More to come later.

https://static1.pt-content.com/images/pt/2015/03/EF523AE407194A2D9EAD48394210C716_zpsxqkh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EF523AE4-0719-4A2D-9EAD-48394210C716_zpsxqkhektc.jpg.html)

https://static1.pt-content.com/images/pt/2015/03/FF8185879B33484B8FF7BB7CBB4899B9_zpswdbu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FF818587-9B33-484B-8FF7-BB7CBB4899B9_zpswdbuyef6.jpg.html)

https://static1.pt-content.com/images/pt/2015/03/A68E5FF9F487489BA0DE1D5AC488CD5C_zps16yb-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A68E5FF9-F487-489B-A0DE-1D5AC488CD5C_zps16ybdlej.jpg.html)

https://static1.pt-content.com/images/pt/2015/03/B3C8FFE3EA09498B8A4F25C8A633DFB6_zpsbwh3-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B3C8FFE3-EA09-498B-8A4F-25C8A633DFB6_zpsbwh3pqsk.jpg.html)

Kiquee71

03-29-2015, 09:43 AM

Hello everyone, not much of an update. Had to move some things around in the garage and the Nova had to go outside for a sec. Thought I'd take some pics of it cause it will go back in lol. Work has been busy so the Nova has to take a break from progress. Will get back to it soon as we slow down. Will update as soon as I can.

https://static1.pt-content.com/images/pt/2015/03/9898DC77874E454A8EA8D51670B64CA8_zpspd6c-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9898DC77-874E-454A-8EA8-D51670B64CA8_zpspd6chm6q.jpg.html)

https://static1.pt-content.com/images/pt/2015/03/5E04165DCDEE4E3EA33E7035483CB483_zpskowe-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/5E04165D-CDEE-4E3E-A33E-7035483CB483_zpskowee6r1.jpg.html)

ryanleiker

04-24-2015, 09:33 AM

Kiquee71

04-26-2015, 09:28 PM

Thanks. Still been busy with work, but hopefully I can get back to the Nova.

Little progress made on the Nova this past couple of weeks. Finished fabricating a trans crossmember which came out ok, it will do the job for sure. It will give much added clearance to help when fabricating the exhaust around the torque arm suspension. Also tweaked the trans dipstick I picked up from Madman, was too long for my taste. Up next is get driveshaft shorten, new u-joints and high speed balance. I've started making a list of things I'll need for the SS exhaust and will be picking them up soon. Until then for more updates.

https://static1.pt-content.com/images/pt/2014/10/9D69D13352BE404CB0BF99FF9E05F6E8_zpsqfve-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9D69D133-52BE-404C-B0BF-99FF9E05F6E8_zpsqfvewcdr.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/1B18F1E5C0EA48BC900AD9A9F1001653_zps8rjd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1B18F1E5-C0EA-48BC-900A-D9A9F1001653_zps8rjdppld.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/EF6E957C2E394C189CD78A0C260DF174_zpsebvy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EF6E957C-2E39-4C18-9CD7-8A0C260DF174_zpsebvynwfw.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/D64803BA312B48138B44DB99E2DC633C_zps4cv6-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D64803BA-312B-4813-8B44-DB99E2DC633C_zps4cv6zhhs.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/351E8C003DA64438BE73AD57D2DE7A53_zpsvsis-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/351E8C00-3DA6-4438-BE73-AD57D2DE7A53_zpsvsisvrgk.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/E2AC86EC6C164607AE949FAE16003409_zps3ioe-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E2AC86EC-6C16-4607-AE94-9FAE16003409_zps3ioezvzs.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/A3C33D839D2F4691958FBFA41FBCA544_zpsyu46-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A3C33D83-9D2F-4691-958F-BFA41FBCA544_zpsyu4671bq.jpg.html)

https://static1.pt-content.com/images/pt/2014/10/7369277F1EF843BAA56FB14B98FCFE61_zpsni6e-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/7369277F-1EF8-43BA-A56F-B14B98FCFE61_zpsni6euhr7.jpg.html)

That transmission crossmember is a work of art. Well done.

Kiquee71

12-13-2015, 12:40 AM

Been about nine months since I've posted any progress on my Nova, but the plan is still in full progress in my head :). Work has slowed down so I continued on the exhaust up till the rear diff. My vacation is coming up soon, so my plan is to finish over the diff to the bumper. Kinda tight underneath their, but not impossible. Merry Xmas peeps and a Happy New Years :)

https://static1.pt-content.com/images/pt/2015/12/BE51DCF352274097A8F107E548793A32_zpssbhf-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BE51DCF3-5227-4097-A8F1-07E548793A32_zpssbhfjqtk.jpg.html)

https://static1.pt-content.com/images/pt/2015/12/CE0525CDB96A43759D0BEB675EEA8827_zpsvdxx-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/CE0525CD-B96A-4375-9D0B-EB675EEA8827_zpsvdxx9cih.jpg.html)

https://static1.pt-content.com/images/pt/2015/12/5E7944C540B1495185D7C6760B2621D4_zpsydj3-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/5E7944C5-40B1-4951-85D7-C6760B2621D4_zpsydj3qoby.jpg.html)

https://static1.pt-content.com/images/pt/2015/12/8C43F91D2EE044FE83517DA0F0F119D9_zpsqi6n-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8C43F91D-2EE0-44FE-8351-7DA0F0F119D9_zpsqi6nmnix.jpg.html)

https://static1.pt-content.com/images/pt/2015/12/2E17C78F86EC4E9986E1E96F00E7CC5B_zpstxpe-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2E17C78F-86EC-4E99-86E1-E96F00E7CC5B_zpstxpeeq2q.jpg.html)

https://static1.pt-content.com/images/pt/2015/12/000FDCF51ED44D149607F60685030D69_zpsndve-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/000FDCF5-1ED4-4D14-9607-F60685030D69_zpsndvehaep.jpg.html)

https://static1.pt-content.com/images/pt/2015/12/21F9FD91038745EC8B16023A80CFB723_zps5n5u-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/21F9FD91-0387-45EC-8B16-023A80CFB723_zps5n5ueyay.jpg.html)

MOREHORSEPOWER

12-13-2015, 09:38 AM

Looking Good !!

Ben@SpeedTech

12-14-2015, 08:08 AM

Fantastic work! The tail pipes get a little tight but it's doable, we have done several in the shop with 3" pipe. Pictured here is a 68 Nova also with our torque arm, hopefully this will give you some inspiration. The angle of the photo makes the left tailpipe look closer to the panhard than it actually is, there is actually plenty of room in there.

https://static1.pt-content.com/images/pt/2015/12/6820nova20exhaust20122072_zpszjrz05m5-1.jpg

https://static1.pt-content.com/images/pt/2015/12/6820nova20exhaust20220122072_zpsvlfjjoct-1.jpg

Keep up the good work!

Kiquee71

12-14-2015, 09:00 AM

Thanks Ben for the info and photos. Yes it's tight but it can be done with some patience lol. My plan was to cut the corners of the trunk so it will give me more room to run exhaust above the gas tank and out by the rear tire then out to the back. I can box the corners in after I've run the exhaust through there. I will look into how you guys ran it in the photos if I run into issues with my plan.

Fantastic work! The tail pipes get a little tight but it's doable, we have done several in the shop with 3" pipe. Pictured here is a 68 Nova also with our torque arm, hopefully this will give you some inspiration. The angle of the photo makes the left tailpipe look closer to the panhard than it actually is, there is actually plenty of room in there.

https://static1.pt-content.com/images/pt/2015/12/6820nova20exhaust20122072_zpszjrz05m5-1.jpg

https://static1.pt-content.com/images/pt/2015/12/6820nova20exhaust20220122072_zpsvlfjjoct-1.jpg

Keep up the good work!

Ben@SpeedTech

12-14-2015, 09:26 AM

I'm anxious to see how that works out, sounds interesting!

Kiquee71

01-01-2016, 06:01 PM

Well didn't finish what I had planned for this break, but did make some progress. Finished up the passenger side exhaust over the rear end and to the back just before the rear bumper. I'm pleased on how it came out, hanger installed and plenty of room for movement under there. It's a slow process, but I'm seeing the finishing product down the road.

https://static1.pt-content.com/images/pt/2016/01/DD7B566BED3D4A20BB229F28775701B2_zpsrvkd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DD7B566B-ED3D-4A20-BB22-9F28775701B2_zpsrvkdffpw.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/FB6DB3A47D814F528AA053A8C4A11F71_zpspgsj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FB6DB3A4-7D81-4F52-8AA0-53A8C4A11F71_zpspgsjhq0u.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/11D3816B50ED4CD79AD6E179801AADE2_zpssfem-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/11D3816B-50ED-4CD7-9AD6-E179801AADE2_zpssfemglia.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/D2934446FADF4BA4AEEC337231A13397_zpsusko-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D2934446-FADF-4BA4-AEEC-337231A13397_zpsuskolwiw.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/1F618A09E10E4C278E2AA303FAB25945_zps4cwp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1F618A09-E10E-4C27-8E2A-A303FAB25945_zps4cwpw9oq.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/DBB6689B322E45089279280A7210D1D7_zpsutk1-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DBB6689B-322E-4508-9279-280A7210D1D7_zpsutk1z4ei.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/B231A32D3BC54DF2A7B817BA47896A79_zpsojjm-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B231A32D-3BC5-4DF2-A7B8-17BA47896A79_zpsojjm3m7v.jpg.html)

Kiquee71

01-15-2016, 01:10 PM

FINALLY!!!!! I'm quite relieved that I'm done with the exhaust, well.... as far as its all tacked up and in its final place. Have a another header tube that's needs repositioning other than that final welding will be done when car is stripped down ready for body & paint. Some patching needs to addressed now in the trunk area :) Moving on to the front of the Nova I'm planning on fitting front sheetmetal, inner fender wells and adjust front ride height roughly to see if any modifications need to be addressed to fenders / inner fender wells. Until next time with more progress & photos.

https://static1.pt-content.com/images/pt/2016/01/B18986A256974BE988A16BD04A8D3E31_zpst2bq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B18986A2-5697-4BE9-88A1-6BD04A8D3E31_zpst2bqde7t.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/941726F8F8C2443BAAE9D6257993DA77_zps2qy5-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/941726F8-F8C2-443B-AAE9-D6257993DA77_zps2qy5liby.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/FC9BC819CC264DEDBD0719B585F8035A_zpsfl9i-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FC9BC819-CC26-4DED-BD07-19B585F8035A_zpsfl9ig4sg.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/4FC894EF7C3944B499ADF429E6896A89_zpsvuuh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4FC894EF-7C39-44B4-99AD-F429E6896A89_zpsvuuhpzfq.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/2C14623C6C6D4EDFA2A8699AE2FC4B90_zpsrjm9-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2C14623C-6C6D-4EDF-A2A8-699AE2FC4B90_zpsrjm9qgu6.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/0454ABCFCB06421A95A0F18DB0E83F5B_zpsqrhq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0454ABCF-CB06-421A-95A0-F18DB0E83F5B_zpsqrhqk4oj.jpg.html)

https://static1.pt-content.com/images/pt/2016/01/8451E7E2912A432D97713BA8D2CA0D49_zpsjdkp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8451E7E2-912A-432D-9771-3BA8D2CA0D49_zpsjdkpe5z9.jpg.html)

Ben@SpeedTech

01-15-2016, 01:24 PM

Nice!!

Kiquee71

03-20-2016, 05:26 PM

Made a little progress this last couple of weeks. Fitted up front fenders, radiator core support, adjusted ride height some more to find out that drivers side fender rubs on the lip. Now the passenger side same height doesn't rub, hmmm. I looked into the drivers side a little closer and notice it has been repaired and not a very good job at that. So needing to replace fender with a new one and check again so I can move on to inner fenders fitment. More on that later, the patches in trunk from the exhaust cut outs I made are covered now. Slow progress but things are getting done :)

https://static1.pt-content.com/images/pt/2016/03/71EE5DD6D75C42C49E53F91E1262D252_zpsxyeo-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/71EE5DD6-D75C-42C4-9E53-F91E1262D252_zpsxyeoz0nt.jpg.html)

https://static1.pt-content.com/images/pt/2016/03/0A2B27F240B04E7B97D01CE73C0431D8_zpsxrkw-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0A2B27F2-40B0-4E7B-97D0-1CE73C0431D8_zpsxrkwiwhk.jpg.html)

https://static1.pt-content.com/images/pt/2016/03/4640B1135C194F49874C6A6662AC14C3_zpso6te-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4640B113-5C19-4F49-874C-6A6662AC14C3_zpso6teiuty.jpg.html)

jasonsnova

03-21-2016, 06:13 AM

Lookin great...some tight spaces on the exhaust. Not looking ford to doing mine lol

Kiquee71

03-21-2016, 11:24 AM

Lookin great...some tight spaces on the exhaust. Not looking ford to doing mine lol

It wasn't that bad under there for the exhaust, just took some time to figure things out & what can work or not.
Nice job on your Nova Jason, wish I can get things done at the pace your going. Keep the updates coming on your project, looking great.

windows

03-21-2016, 04:45 PM

Project looks great. I see you're using PBR brakes, and wondering if you are going to use stock padlets or one piece brake pads?

Kiquee71

03-21-2016, 09:11 PM

Project looks great. I see you're using PBR brakes, and wondering if you are going to use stock padlets or one piece brake pads?

Hey Windows. The brakes are not from PBR, they are Chevy's Z06 Big Brake Kit that I purchased from Tobin at Kore3. I'm using the pad lets that came with the kit, maybe someday down the road I will try the single pads.

Kiquee71

05-01-2016, 08:10 PM

While I'm waiting for my new front driver side fender, I've decided to start on some other tasks. I started with the front engine accessories which I had purchased a ( VintageAir LS Front Runner ) system from a forum member here. I must say I like this system cause of it being very compact. Will have about 6 1/2 in. of room in front of it for radiator/ electric fans, so I'll be looking around for something that will work. Also ordered some Sparco sliding seat tracks so I can start fabricating for the GTO's seats to be mounted. This will keep me busy for now lol.
https://static1.pt-content.com/images/pt/2016/05/EBA2111983B04B6DAF12E4AE0A7D3F4D_zpsqbrr-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EBA21119-83B0-4B6D-AF12-E4AE0A7D3F4D_zpsqbrrokm5.jpg.html)

https://static1.pt-content.com/images/pt/2016/05/92C5F32868104E40972CAFFB8B2F5F54_zpsetmg-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/92C5F328-6810-4E40-972C-AFFB8B2F5F54_zpsetmg3mlb.jpg.html)

Kiquee71

05-22-2016, 09:41 PM

Still waiting for my front fender and was told that ETA would be around the end of July. So I went onto the seats and began with making some brackets for the Sparco sliders to be mounted to the bottom of the seats. I had purchased some stock bucket seat brackets that were for an original bucket seat car. Had to modify them to work with my raised tunnel and then weld them down to the floor. Mounted the seats and must say I like the look :cool: very comfortable too. lol Next will be figuring out how to make the back seats work. Be back soon ✌

https://static1.pt-content.com/images/pt/2016/05/4DEB2F1F77944CFC94BA4A34794B0E90_zps25yj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4DEB2F1F-7794-4CFC-94BA-4A34794B0E90_zps25yjtcbj.jpg.html)

https://static1.pt-content.com/images/pt/2016/05/2E5EB79683CB44C7B9C34819427DE25F_zpsnn8c-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2E5EB796-83CB-44C7-B9C3-4819427DE25F_zpsnn8cnssi.jpg.html)

https://static1.pt-content.com/images/pt/2016/05/D2F71860006443C48A928C2AB47A9B03_zpsejvd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D2F71860-0064-43C4-8A92-8C2AB47A9B03_zpsejvdsm2p.jpg.html)

https://static1.pt-content.com/images/pt/2016/05/14E5C264B6814B4FBAAA6126DECDF279_zpsqucs-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/14E5C264-B681-4B4F-BAAA-6126DECDF279_zpsqucsnffq.jpg.html)

Ben@SpeedTech

05-23-2016, 06:27 AM

Nice! They look right at home! In the shop here we have had real good success with PRC fan and shroud combinations. If you're after something used, in browsing the web I've heard people say that Ford Taurus dual fans work great, not sure how that would fit the Nova.

Kiquee71

05-23-2016, 06:52 AM

Thanks Ben for that info. I've sent an email to PRC and looking forward to what they say.

Juicebox

05-23-2016, 08:42 AM

Kiquee71

05-23-2016, 10:48 AM

What steering box is that?[/QUOTE]

JuiceBox- The steering box is from Lee's which I believe that he is no longer in business. It's one of his boxes that he well known for and bolts right up in stock location.

Ben@SpeedTech

05-23-2016, 11:10 AM

Kiquee71

05-23-2016, 11:19 AM

We've recently heard word that Lee Mfg. is firing up again under new owners/management and although Tom Lee is retired he will be available for guidance. 670 boxes are still hard to find and will be available on a limited basis from what I understand.

Thanks Ben for correcting my info. That's good news to hear cause I still need hoses for my steering box to pump.

Centerforce

05-23-2016, 05:04 PM

Great progress! Judging from the pic it looks like youll have plenty of headroom with those seats and custom mounts.

Kiquee71

05-24-2016, 08:43 AM

Great progress! Judging from the pic it looks like youll have plenty of headroom with those seats and custom mounts.

Thanks Centerforce, making as much progress as I can. By removing the electric tracks from the seats I was able to mount the seats as low as I could. The only thing electrical that I kept is the part that adjusts the reclining of the seats. With a helmet on I still lots of room to the headliner, though it helps that I'm not a very tall man lol

Z06killinSBF

05-25-2016, 07:34 AM

Moving along nicely and some quality work being done. Looks great

Kiquee71

05-29-2016, 05:48 PM

Today I finished up fitting the bottom portion of the back seats. They had to be placed a little towards the center cause of the mini tubs, but other wise look ok. Looks like I'll need to remove the back seat bracing, firewall etc to move it back about several inches to accommodate the top portion of the back seat. Will see how things go.

https://static1.pt-content.com/images/pt/2016/05/B320673E9AD94456BF0F79F7BB557098_zpstdrw-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B320673E-9AD9-4456-BF0F-79F7BB557098_zpstdrwqwx2.jpg.html)

https://static1.pt-content.com/images/pt/2016/05/21D33E2349034A3BB24CF8144B1D2743_zps7rvr-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/21D33E23-4903-4A3B-B24C-F8144B1D2743_zps7rvrmnft.jpg.html)

https://static1.pt-content.com/images/pt/2016/05/74BF06AA9F3E490DAF7CE72B20418BA5_zpsigmj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/74BF06AA-9F3E-490D-AF7C-E72B20418BA5_zpsigmj0mtr.jpg.html)

Ben@SpeedTech

05-31-2016, 06:59 AM

That'll look awesome when completed!

scherp69

05-31-2016, 06:02 PM

Kiquee71

06-01-2016, 05:15 AM

Looking good! Our builds are very similar, seats and all. Not sure if you've seen my build (haven't done anything in a couple years though), but I've put in the GTO seats front and back also. Keep up the good work.

Hey Sherp69, yes I've have seen your build :) A lot of what I've done did come from your project and others that I've seen here too. The top back seats are defiantly the challenge here lol. I've been tossing the idea around about getting rid of the back padding behind the headrest to make it look like the front seats and do some forming of the foam around the headrest. Will see how it goes lol. Hope you get some fire under you to finish up your project.

Kiquee71

06-05-2016, 05:22 PM

Finished up fitting the top portion of the GTO back seats in the car this weekend. I started by removing the back padding behind the headrest, formed it a bit, cut some of the frame of seat and welded a pad to the floor with a nut to where both seats will bolt up. Will need to have both top back seats and the front seats sent to have some upholstery upgrades done to them. Next will finish the firewall behind the seats to complete this task, was tired of climbing in & out of this car lol.

https://static1.pt-content.com/images/pt/2016/06/030A958743F7411FB243B2135039CCF5_zpsqcr5-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/030A9587-43F7-411F-B243-B2135039CCF5_zpsqcr5pmvj.jpg.html)

https://static1.pt-content.com/images/pt/2016/06/83CCDC097C524B20B82BAA7F9802199D_zpsecps-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/83CCDC09-7C52-4B20-B82B-AA7F9802199D_zpsecpssjgh.jpg.html)

https://static1.pt-content.com/images/pt/2016/06/7A44DC021491412584838AE0B9DFE3FC_zpskxs9-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/7A44DC02-1491-4125-8483-8AE0B9DFE3FC_zpskxs9tscj.jpg.html)

https://static1.pt-content.com/images/pt/2016/06/588A4BC4CBC9470F825266C77B2BAE83_zpskxi3-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/588A4BC4-CBC9-470F-8252-66C77B2BAE83_zpskxi3cwhe.jpg.html)

Oregon

06-05-2016, 06:17 PM

Lookin' good!

Was it worth it to start with stock bucket seat brackets and modify them for the front seats? I need to get my seats mounted soon and I have the same enlarged tunnel problem.

Kiquee71

06-05-2016, 09:02 PM

Lookin' good!

Was it worth it to start with stock bucket seat brackets and modify them for the front seats? I need to get my seats mounted soon and I have the same enlarged tunnel problem.

Oregon, I had bought the GTO seats way before I thought about brackets and stuff. Anyways my tunnel wasn't really the problem, it was the cars floor which was the problem. When I purchased the stock brackets for the buckets seats I thought it was going to be a breeze. The brackets once tacked to the floor was uneven compared to the bottom of the GTO's seats, so I had to improvise to level it all out. I was wondering if the bottom of the stock buckets seats brackets were uneven to go with those brackets I purchased. My car came with a bench seat, so I can't compare. Good luck with your project.

Oregon

06-06-2016, 04:35 AM

Gotcha. Thanks for the explanation.

My car is a bench seat car too. Looks like I'll just start from scratch.

Good luck with your build as well.

Ben@SpeedTech

06-06-2016, 06:53 AM

Lookin good man!

Kiquee71

01-18-2017, 05:15 PM

Well it has been a while since I've done any work to the Nova, but have been getting parts tho. Anyways had some time off today from work so I decided to make the divider between the back seats and trunk. Got it all ready for spot welding in place. Now that's for another day.

https://static1.pt-content.com/images/pt/2017/01/26942DF91B6742658B7159C07FE67952_zps6qhy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/26942DF9-1B67-4265-8B71-59C07FE67952_zps6qhy0y6h.jpg.html)

https://static1.pt-content.com/images/pt/2017/01/29A24E9E6DE64D88B90AE6226E17000A_zps9aoc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/29A24E9E-6DE6-4D88-B90A-E6226E17000A_zps9aocl91b.jpg.html)

JohnJ@RideTech

01-19-2017, 12:54 PM

Sweet Build!

frojoe

01-19-2017, 01:03 PM

Subscribed as I need to make a firewall behind my rear seat back just like what you've done. Nice work!

chuck_skywalker

01-19-2017, 02:53 PM

Love what you did to the front subframe. Exactly what i want to do! Front suspension set up looks killer! i have a good idea what direction i want to go with mine!

Kiquee71

01-19-2017, 03:23 PM

Thanks guys. Wish I had more time available to get things done, but with new job, kid, etc. it's hard to get out there working on it. Glad I'm giving you guys some ideas and that's pretty much how I started my project is reading other peeps project. It will get done I'm sure of that but when lol.

Kiquee71

02-11-2017, 09:36 PM

Well after a busy day with son's baseball picture day I finally had time to finish up the back seat divider. Finished up all the spot welding and cleaned them up. Installed the back seats again and decided to take five on them for a few second lol. I bought a steering column from a member here and waiting for my steering wheel also purchased from another member. Will post photos once I've received them. Will be fitting up drivers fender tomorrow and see how she fits compared to the original that rubbed when the wheel was full left. Hope it clears so I can move on to the fab work on the inner fender wells. More to come ? stay thirsty my friends lol

https://static1.pt-content.com/images/pt/2017/02/E5BBA99D87EA4750A7A754FEE3E2DCB7_zpsfkmf-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E5BBA99D-87EA-4750-A7A7-54FEE3E2DCB7_zpsfkmf1wcy.jpg.html)

https://static1.pt-content.com/images/pt/2017/02/E17BE6F6CAD04A9ABE9522CD5206A647_zpsgnzl-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E17BE6F6-CAD0-4A9A-BE95-22CD5206A647_zpsgnzl6n5z.jpg.html)

https://static1.pt-content.com/images/pt/2017/02/C21DF07CDCC24D94817BB8E45184DF96_zpshnyz-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C21DF07C-DCC2-4D94-817B-B8E45184DF96_zpshnyzjmpj.jpg.html)

Kiquee71

03-03-2017, 08:16 PM

A little more progress. Started by cutting out the speaker sheet metal at the dash and filling in with a solid piece. Wanted to get some practice on my tig with sheet metal before I tackle the hood with some vents. So far so good. Still waiting on parts and time so I can continue with other things to do. More to come.

https://static1.pt-content.com/images/pt/2017/03/29140E0C65C74BB593ED015FA93F463F_zpssfdk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/29140E0C-65C7-4BB5-93ED-015FA93F463F_zpssfdkginq.jpg.html)

https://static1.pt-content.com/images/pt/2017/03/77A07D674191411390E4A95CCF0760F6_zpsjesb-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/77A07D67-4191-4113-90E4-A95CCF0760F6_zpsjesbjfpn.jpg.html)

Kiquee71

03-04-2017, 09:28 PM

Working late lol. Did some final welding on my hood vents, not bad for the first one. Hopefully the second one comes out a little better. Hmmm wonder if I need some more beers lol

https://static1.pt-content.com/images/pt/2017/03/D760E05C087946DD98902BAF5EBD0DB4_zpsg3mq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D760E05C-0879-46DD-9890-2BAF5EBD0DB4_zpsg3mq2wdlhtml)

https://static1.pt-content.com/images/pt/2017/03/BEE11C9685A54EE2AF3F97152DC82636_zps9hyl-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BEE11C96-85A5-4EE2-AF3F-97152DC82636_zps9hyl9ejf.jpg.html)

Centerforce

03-06-2017, 11:20 AM

Great job on the fill! That's thin material, and it looks like you had barely any warping.

frojoe

03-06-2017, 11:26 AM

Kiquee71

03-06-2017, 07:50 PM

Thanks Centerforce. Yes very thin lol but I managed to keep somewhat straight. I had to use dolly hammer to bang out the little waves. I messed up on deleting my side markers with mig and now the body guys will have to fix that lol. So I tried tig welding this time and my test subject was that speaker sheet metal on the dash. Wanted to get a handle on it before I tackle the vents on a new hood.

Great job on the fill! That's thin material, and it looks like you had barely any warping.

Kiquee71

03-06-2017, 07:55 PM

Awesome progress! Are those FrankV's vents that you welded together, or did you make them yourself from scratch? That's the exact style of vent I want to put on my non-cowl hood, so I'm really interested to see how they look turn out on yours.

Yes those are Frank's vents, but I bought them tacked only. I figured I can weld them or fuse them myself. Wasn't an easy task on the first one. Was having issues, but finally managed to finish it up. I'm excited to see how they turn out or I ruin a perfectly good hood. Still a ways from getting to that point.

Kiquee71

03-18-2017, 08:39 PM

Little update. It's always nice to get things delivery lol. Cleaned up the brake pedal assembly, tilt steering from a member here, steering wheel Budnik also from a member here. Thanks guys nice products you have. Next, make a bracket for gas pedal. Waiting on a new Miller Dynasty 210 DX to help out in my projects here in the ole garage. :)

https://static1.pt-content.com/images/pt/2017/03/5622FF9BBD2C41CEA8F8B209D20A3BDF_zpsyrp8-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/5622FF9B-BD2C-41CE-A8F8-B209D20A3BDF_zpsyrp84ygb.jpg.html)

https://static1.pt-content.com/images/pt/2017/03/2CC44623924B430996BE7C8F7D7D842C_zpskmiq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2CC44623-924B-4309-96BE-7C8F7D7D842C_zpskmiq3giu.jpg.html)

https://static1.pt-content.com/images/pt/2017/03/AFC03754633B4EB48D6463345BF179D8_zpsyjv5-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/AFC03754-633B-4EB4-8D64-63345BF179D8_zpsyjv5uwi5.jpg.html)

https://static1.pt-content.com/images/pt/2017/03/634368AAA69B49879DC9DC3D90DE2B06_zpsaa0s-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/634368AA-A69B-4987-9DC9-DC3D90DE2B06_zpsaa0s3s0f.jpg.html)

https://static1.pt-content.com/images/pt/2017/03/A12EC17C335B4C95A711AD77E388D90E_zpsu2pc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A12EC17C-335B-4C95-A711-AD77E388D90E_zpsu2pcccum.jpg.html)

Kiquee71

03-19-2017, 04:18 PM

Finished up a welding cart for the new machine that will arrive this week. Can't wait to start messing with it :)

https://static1.pt-content.com/images/pt/2017/03/F5A88C8E33C84761A2156CA02C7E3434_zpsb2vi-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/F5A88C8E-33C8-4761-A215-6CA02C7E3434_zpsb2viebmo.jpg.html)

Centerforce

03-24-2017, 10:11 AM

That's a nifty little cart!

tom091074

03-26-2017, 02:42 AM

Nice work!!!

Kiquee71

03-27-2017, 08:01 AM

It worked out great :cool:

https://static1.pt-content.com/images/pt/2017/03/A7EF2EB99477402F9382C26B0F9EF55C_zpsneem-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A7EF2EB9-9477-402F-9382-C26B0F9EF55C_zpsneemuony.jpg.html)

Kiquee71

04-07-2017, 04:19 PM

Finished up the bracket I needed to install my DBW gas pedal to somewhere close to original spot. Not too shabby I must say.

https://static1.pt-content.com/images/pt/2017/04/BF4E563022374F88A2FDAE8E0DBE8EEA_zpszhys-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BF4E5630-2237-4F88-A2FD-AE8E0DBE8EEA_zpszhys99ha.jpg.html)

https://static1.pt-content.com/images/pt/2017/04/0C4B2C7B7D3546EFBB30041F60584161_zpszqjp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0C4B2C7B-7D35-46EF-BB30-041F60584161_zpszqjpa7a9.jpg.html)

https://static1.pt-content.com/images/pt/2017/04/2CE4C0A95B7A4DCC968BB14F9E3E3DCD_zpss4uz-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2CE4C0A9-5B7A-4DCC-968B-B14F9E3E3DCD_zpss4uz8wtm.jpg.html)

Ben@SpeedTech

04-10-2017, 06:30 AM

Looks great! I like the fact that you're trying to keep the pedals matching.

1sikride

04-10-2017, 07:52 AM

This car is awesome

Kiquee71

09-03-2017, 02:05 PM

Well it's been 5 months since I've updated my progress, but I've have been working on her. I've been working on the passenger inner fender well to give the tires some room to breath lol. Will post those photos later cause I ran out of sheet metal. I notch the frame a bit to clear the tire when in full lock so it doesn't rub. I'll get back to it when I get some more material.

https://static1.pt-content.com/images/pt/2017/09/520EA89BCC094B1F9FC7ADBCF2878A86_zps7pws-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/520EA89B-CC09-4B1F-9FC7-ADBCF2878A86_zps7pwsiw9v.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/CB4F5ED85BFD46D0BE5CF2842FB80BFD_zps35cy-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/CB4F5ED8-5BFD-46D0-BE5C-F2842FB80BFD_zps35cycmv0.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/A4BBB22181E04F72BA12C0E0EB9C7E3A_zpsn3bm-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A4BBB221-81E0-4F72-BA12-C0E0EB9C7E3A_zpsn3bmdgt1.jpg.html)

: update. I've decided to add some reinforcement to the area I notched out in the frame. It's been mentioned to me to do so, but after some tossing the idea around I did. Wouldn't hurt right lol

https://static1.pt-content.com/images/pt/2017/09/EF68EDC55D5E465F8C066D619E74DE25_zpsv2ex-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EF68EDC5-5D5E-465F-8C06-6D619E74DE25_zpsv2ex0lum.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/770D9774904B4912A953DCCF1DA33CCF_zpsn8pl-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/770D9774-904B-4912-A953-DCCF1DA33CCF_zpsn8ple9po.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/1F6CD3B516CA4FBC811E667133A4ED76_zpsajdm-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1F6CD3B5-16CA-4FBC-811E-667133A4ED76_zpsajdmqxsd.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/E0938505A0CF4D9CB51E2643F4E7365E_zpsyip5-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E0938505-A0CF-4D9C-B51E-2643F4E7365E_zpsyip5esh8.jpg.html)

Peter Mc Mahon

09-04-2017, 03:48 AM

Is the frame clearance still good through complete suspension cycle?

Kiquee71

09-04-2017, 11:35 AM

Is the frame clearance still good through complete suspension cycle?

Peter, I did raise and lower the car the best I could in the garage to determine clearance. Didn't take out much, definitely better than it was before. Just wanted a little clearance from the frame. The drivers side is going to be tricky cause of steering box, might have to move one of the steering box bolts to top of frame cause the cut will go into the lower bolt in the frame. That's a little ways out till I get that stage. Thanks for the asking cause I don't want to make a mistake that already has been done.

Kiquee71

09-11-2017, 12:57 PM

Ok the passengers inner fender for tire clearance is complete. After bolting it back together I'll jump over to the drivers side. Getting more done since work has been slow, so I'm tackling as much as I can for now.

https://static1.pt-content.com/images/pt/2017/09/8EB92EFFBBB6469188E73387F278F1C5_zpsvgip-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8EB92EFF-BBB6-4691-88E7-3387F278F1C5_zpsvgipnhtl.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/C6F9DD5C11C042B2BC7B7A22F854DEFE_zpsoivc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C6F9DD5C-11C0-42B2-BC7B-7A22F854DEFE_zpsoivcpitx.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/B58173D09A5F4BA884343C85BCC01F9B_zpsy8ds-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B58173D0-9A5F-4BA8-8434-3C85BCC01F9B_zpsy8dsflaw.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/0F87A97E9ACD4EDD8902F7009FD1C71B_zpsmnx1-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0F87A97E-9ACD-4EDD-8902-F7009FD1C71B_zpsmnx1vquk.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/E91D3DE5997243BF8254390166F7AAB5_zpso8kk-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E91D3DE5-9972-43BF-8254-390166F7AAB5_zpso8kksqh0.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/DC1246989DF740DBAA8E03D73D7DBE95_zpsdi9p-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DC124698-9DF7-40DB-AA8E-03D73D7DBE95_zpsdi9pm0iq.jpg.html)

Kiquee71

09-23-2017, 01:30 PM

Finished up driver side frame notching and it came out better than I thought it was. It will do and might still rub a bit, but not like before. Steering box bolted up nicely too. Next, driver inner fender well modification.

https://static1.pt-content.com/images/pt/2017/09/BC6F4C7AA64140B59834436A477745DA_zpsfgpq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BC6F4C7A-A641-40B5-9834-436A477745DA_zpsfgpq6tga.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/30DE5204B7D846A7B72BD431FE29E166_zpsw8vh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/30DE5204-B7D8-46A7-B72B-D431FE29E166_zpsw8vhh5ds.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/A1A471884DCD45C298785039AC3FEA6F_zpspshx-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A1A47188-4DCD-45C2-9878-5039AC3FEA6F_zpspshxgivw.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/02AB824425104AB1B6561A6215D087EE_zpspdt2-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/02AB8244-2510-4AB1-B656-1A6215D087EE_zpspdt2fpu3.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/A3B1EA6C07134B0288A797819224D8CE_zpsjeta-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A3B1EA6C-0713-4B02-88A7-97819224D8CE_zpsjetawdsg.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/00BCEA0A4C234B40ABCFE300BDC15D6A_zpsi2gm-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/00BCEA0A-4C23-4B40-ABCF-E300BDC15D6A_zpsi2gme4ar.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/AEC7882019364AEBB28AF022D206FF2E_zpsmia4-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/AEC78820-1936-4AEB-B28A-F022D206FF2E_zpsmia4r2k0.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/C2BF0063F2F64E649AC4837266EA183C_zps2weq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C2BF0063-F2F6-4E64-9AC4-837266EA183C_zps2weqaz1q.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/B6BDB929979A41B08A0CD717092F3437_zpskoiu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B6BDB929-979A-41B0-8A0C-D717092F3437_zpskoiue4x8.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/FED5503739C34E30AFC3A746E0BD7C8A_zpsivt3-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FED55037-39C3-4E30-AFC3-A746E0BD7C8A_zpsivt3ztl1.jpg.html)

https://static1.pt-content.com/images/pt/2017/09/9020EA2B776B43CEAA0A95C374E524FB_zpsmmhw-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9020EA2B-776B-43CE-AA0A-95C374E524FB_zpsmmhwnlvn.jpg.html)

Kiquee71

10-11-2017, 03:41 PM

Ok, driver side inner fender done!!!! Scratch that off the list of modifications to do. Onto the next one. More to come later. Maybe by end of year I'll be looking for a shop to do the final steps, body & paint, upholstery, wiring and give it back to me turn key lol. Well that's the plan anyways.

https://static1.pt-content.com/images/pt/2017/10/164754094E4F43C188FEAAA53A316CD1_zpsimpt-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/16475409-4E4F-43C1-88FE-AAA53A316CD1_zpsimptydyp.jpg.html)

https://static1.pt-content.com/images/pt/2017/10/A158C6AC056C4464B403E971416206E6_zps4qaj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A158C6AC-056C-4464-B403-E971416206E6_zps4qajv3gy.jpg.html)

https://static1.pt-content.com/images/pt/2017/10/D69E7147C8384BAEAE4F451E62033EB1_zpsbuxa-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D69E7147-C838-4BAE-AE4F-451E62033EB1_zpsbuxajmcf.jpg.html)

https://static1.pt-content.com/images/pt/2017/10/049954AF26F7416BA94C38E02231895C_zpsvqln-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/049954AF-26F7-416B-A94C-38E02231895C_zpsvqlntp1g.jpg.html)

Ben@SpeedTech

10-12-2017, 07:59 AM

Nice work, looks well thought out and I like how the mods are effective but hidden. Thumbs up!

Centerforce

10-26-2017, 03:50 PM

Clean work on the frame notch! We take it you're liking the Dynasty so far?

Kiquee71

10-28-2017, 07:18 PM

Clean work on the frame notch! We take it you're liking the Dynasty so far?

Thanks Centerforce. I'm loving the Dynasty. I did some rework on my side marker lights that I didn't like when I welded it up with my mig. It came out so much better with the Dynasty with little sheet metal warp.

Kiquee71

12-30-2017, 05:50 PM

Finished up the welding on the exhaust system and ready to install back into the Nova. Making some progress on my list of things to do, moving on to the next one. The bumpers are next, a little tuck, shave bolts, just looking for a cleaner look. More to come later.

https://static1.pt-content.com/images/pt/2017/12/DA1ED4136EC3463D83053D99ECE5E78A_zps36ub-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DA1ED413-6EC3-463D-8305-3D99ECE5E78A_zps36ub2ri5.jpg.html)

https://static1.pt-content.com/images/pt/2017/12/4B10E585768A4BBFA5A905FFB860C148_zpse0nh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4B10E585-768A-4BBF-A5A9-05FFB860C148_zpse0nh97ju.jpg.html)

https://static1.pt-content.com/images/pt/2017/12/DCD5F442E5B34046806D04BE3E8479D2_zpsdoyv-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DCD5F442-E5B3-4046-806D-04BE3E8479D2_zpsdoyvjpfc.jpg.html)

cornfedbill

12-30-2017, 05:57 PM

Lookin’ real good.

DT69Cam

12-31-2017, 05:24 AM

Is the frame clearance still good through complete suspension cycle?

Wow awesome work!! Are you sure your good lock to lock with the wheels ?? Looks awful close no ??

Kiquee71

12-31-2017, 09:40 AM

Is the frame clearance still good through complete suspension cycle?

Wow awesome work!! Are you sure your good lock to lock with the wheels ?? Looks awful close no ??

It's close DY69Cam, and that's the clearance at full lock to lock. I'm ok with the clearance now, cause before it was rubbing big time. I'm sure somewhere it will rub but shouldn't be that bad. I don't see much rubbing with daily driving. It will be put on track to see some fun driving and that's where it may rub some. If it's really bad looks like I may look into a different sub frame lol ;) oh damn lol

HotRod47

12-31-2017, 11:26 AM

Funny how some build threads just fall through the cracks. Just now seeing this one and have now gone through the entire build. Love it!!! Looking forward to the rest!

DT69Cam

01-01-2018, 06:29 AM

It's close DY69Cam, and that's the clearance at full lock to lock. I'm ok with the clearance now, cause before it was rubbing big time. I'm sure somewhere it will rub but shouldn't be that bad. I don't see much rubbing with daily driving. It will be put on track to see some fun driving and that's where it may rub some. If it's really bad looks like I may look into a different sub frame lol ;) oh damn lol

Haha Looks great. Perhaps a little different offset on rims or a spacer if need be.

Kiquee71

01-01-2018, 10:33 AM

Funny how some build threads just fall through the cracks. Just now seeing this one and have now gone through the entire build. Love it!!! Looking forward to the rest!

Thank you HotRod47. Just read thru your project and wish that most of the photos were up to see the work you did to the car. Your finished car defiantly gives me more push to get more done to my Nova. Your car looks awesome.

Kiquee71

01-08-2018, 09:19 PM

Ok would like some feedback from you guys. I've been tossing some ideas about how to clean up the front bumper, nothing too crazy. I've come up with a few, 1st is OEM, #1 is a LED daytime running bar modified just below the vents and flush, #2 is round daytime running light in place of the original turn signal and #3 is just like a 69 Camaro. In all drawings their will be small LED mounted in the grill and will not be noticeable until they turn on. Bumpers will also be shaved clean from bolts too. Not my drawing either, got it off the old internet, made it easier to do this lol. Let the comments begin, any will help. Thanks.

https://static1.pt-content.com/images/pt/2018/01/0DD0951631334AB29ADDEAD8B211E520_zps9qct-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0DD09516-3133-4AB2-9ADD-EAD8B211E520_zps9qctfjzx.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/93EAAF4EF6084F9BA82851060AF6543A_zpsbxsg-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/93EAAF4E-F608-4F9B-A828-51060AF6543A_zpsbxsggz5v.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/1855A8ABADCE457394F0546CDA3242C1_zpsjuuj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1855A8AB-ADCE-4573-94F0-546CDA3242C1_zpsjuujnrfv.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/4BC5469CA83D423B9A4C5DEAD0CA63B2_zpsfwbj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4BC5469C-A83D-423B-9A4C-5DEAD0CA63B2_zpsfwbjn5id.jpg.html)

rickpaw

01-09-2018, 05:57 AM

I'd vote #1. IMO, the round 69 Camaro style has been done to death.

Ben@SpeedTech

01-09-2018, 07:30 AM

#1 no.
#2 is a nice subtle change, looks like it fits the design well, and keeps the design based on the Nova rather than the Camaro.
#3 as said has been done a lot. Still looks good but if you're going to go through the effort to change yours why do something that's already been done a lot?

Here's a Nova we wrapped up recently where we filled the rectangular holes but left the turn signals, sort of a combo of #2 & 3 of your drawings. Filling those holes and adding round driving lights might be kinda cool and different enough from stock without looking too out of place. Food for thought.

https://static1.pt-content.com/images/pt/2018/01/ixtd9R8-1.jpg

Good luck!

JRANGER

01-09-2018, 04:34 PM

there is another guy on here and this is what he did https://www.pro-touring.com/threads/117473-Frodo-72-Nova-daily-driver-project
147715

Kiquee71

01-10-2018, 08:14 AM

HotRod47

01-11-2018, 02:17 PM

Here is what I did......

As you can see I went with aforementioned 69 Camaro lights in the lower valance. While they may be to a point of being over used, in the Maverick/Comet world this is a completely different look and is very unique. But for turn signals/running lights I made a little bracket and mounted it vertically behind the grill. Mostly out of site when but still very bright and effective when lit up.

This photo they show up very clear, but with the hood down and then looking at them standing up you just don't see them.

https://i.hmjimg.com/images/2018/01/11/IMG_4116.jpg

https://i.hmjimg.com/images/2018/01/11/IMG_4120.jpg

The lights themselves I got from Rodworx and are actually replacement lights for a 1932 Ford front spreader bar.

https://www.rodworx.com/shop/1932-ford-led-spreader-bar-lens-amber/

Just showing another option for the lighting.

Rebob

01-11-2018, 09:05 PM

#2, with mesh in the holes with the LED’s behind it ?

BlackHD

01-11-2018, 09:50 PM

Hi Glen,

Which front spoiler is are you using?

Here is what I did......

https://i.hmjimg.com/images/2018/01/11/IMG_4120.jpg

Just showing another option for the lighting.

OregonianNova

01-14-2018, 08:58 PM

I am really digging this build thread. Love what you have done with the sub frame and inner fender modifications. I am undecided if I am going to keep my original sub or not but if I do I am going to try an replicate what you have done in order to fit bigger tires up front, already have mini tubs on order for the back and plan on using a speedtech torque arm. Any decisions on color? The yellow is really growing on me.

HotRod47

01-15-2018, 02:41 AM

Hi Glen,

Which front spoiler is are you using?

It is from Spoilers by Randy. He has a web site and makes them for many muscle car era vehicles. This one is for a 69 Camaro and is called his Pro Touring style.

Kiquee71

01-15-2018, 01:46 PM

Kiquee71

01-28-2018, 04:12 PM

#2, with mesh in the holes with the LED’s behind it ?

Thanks Rebob. That's something that I will look into.

Kiquee71

01-28-2018, 04:24 PM

Ok rear bumper is done. I've never really had a problem with the rear bumper until I put it into place, man I didn't like the way it fit. I mean the ends of the bumpers look like dumbo ears, there is about an inch between the body and bumper lol. Then the part that runs along the tail lights also about an inch between them. So a little nip & tuck had to take place. Never done this before but have seen some photos out their in the old inter web lol. Took 3/4" out of the sides & 3/8" from where it runs along the tail lights. Shaved the bolts so I get that smooth look. A lot of putting in on & off and my arms and back are burnt out lol. Over all I'm satisfied with the end result. Cool.
I'm waiting for my radiator that I ordered from Wizard Cooling and will be getting the radiator core ready for it when it arrives, can't wait.

https://static1.pt-content.com/images/pt/2018/01/10F044EDA943405CA9D79079146DF668_zps36fd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/10F044ED-A943-405C-A9D7-9079146DF668_zps36fdfchg.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/4832F36251774F3F95D6109ECEB034AC_zpslobj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4832F362-5177-4F3F-95D6-109ECEB034AC_zpslobjhzku.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/0772BBD23E0246988E20091FC11B1364_zpsoab6-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0772BBD2-3E02-4698-8E20-091FC11B1364_zpsoab6v4xf.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/C640BA0F21AF49738B9703DAECE0C615_zpswoes-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C640BA0F-21AF-4973-8B97-03DAECE0C615_zpswoes5o3v.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/7EED2932B00046F5A6AFEAB20D54D5E3_zpsfvya-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/7EED2932-B000-46F5-A6AF-EAB20D54D5E3_zpsfvyakgzb.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/E7C0D8CDEF464603974483916BDA180C_zpsz6yb-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E7C0D8CD-EF46-4603-9744-83916BDA180C_zpsz6yb8i8a.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/A7BC81C238E1418880306DDD1F8EF571_zps5olj-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A7BC81C2-38E1-4188-8030-6DDD1F8EF571_zps5oljdb8i.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/2548CDB4D0AF4F0487757BD72AE82453_zpskhs3-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2548CDB4-D0AF-4F04-8775-7BD72AE82453_zpskhs3uklu.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/A0A483C31D014CB79F7DC02B6E881665_zpswajt-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A0A483C3-1D01-4CB7-9F7D-C02B6E881665_zpswajtpkzb.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/D7023C029EF34D7AA9D33D7B6DC54338_zpsr4lc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D7023C02-9EF3-4D7A-A9D3-3D7B6DC54338_zpsr4lconlk.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/EEAB91F238F140D9A8676522036394D1_zpsgdmh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/EEAB91F2-38F1-40D9-A867-6522036394D1_zpsgdmh16uc.jpg.html)

https://static1.pt-content.com/images/pt/2018/01/E017968F6DCF4EC9A408157AC7AB0CFE_zpscqoi-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/E017968F-6DCF-4EC9-A408-157AC7AB0CFE_zpscqoiwx8h.jpg.html)

nimblemotorsports

01-28-2018, 08:45 PM

nice work on the bumper! looks great.

cornfedbill

01-29-2018, 06:27 AM

The bumper turned out great.

Motown 454

01-29-2018, 08:31 PM

Nice job on the bumper, it looks great.

Kiquee71

01-29-2018, 10:06 PM

Thanks for the complements guys. Now that it is done I've kept looking at it the other day and saying to myself that I could've done things differently that could've saved me some headaches lol Being this was my first, I'm thinking that the front will go a little smoother, still haven't decided what direction I'll be going. Drawing #2 has been looking like a candidate. Will see. That will have to wait, have a radiator coming so radiator core support needs some tweaking also. Power steering cooler, a/c condenser need also to be mounted before I get to the front bumper. More to come soon.

Kiquee71

03-04-2018, 07:12 PM

Ok a little update. Modifications to the radiator support core is complete and radiator installed from Wizard Cooling. AC condenser, power steering cooler also installed. Want to give a lot of props for those guys, radiator came out exactly how I ordered it. Sometimes I get ahead of myself when working on things, should've waited till the radiator arrive before I did final welding on core lol. Oh well a little more time lol. I'm keeping the VVT on my LS so I needed spacers installed on the accessories which made the clearance issues with the electric fans. It all worked out, again thanks Wizard Cooling. Now I can check this off my list and onto the next.

https://static1.pt-content.com/images/pt/2018/03/812A3F9BD8144B9D83A5038F11B66EA2_zpsxbwf-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/812A3F9B-D814-4B9D-83A5-038F11B66EA2_zpsxbwfc46x.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/29118EAA3C3147A39EE85529D5695563_zpshmxc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/29118EAA-3C31-47A3-9EE8-5529D5695563_zpshmxc98tw.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/A84805B48DBE45AD876DE3DB1BBF8CD6_zpsixr0-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A84805B4-8DBE-45AD-876D-E3DB1BBF8CD6_zpsixr0h6ps.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/FA1A8AB0496C42679F4DB36EB47EB13C_zpsdu1h-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FA1A8AB0-496C-4267-9F4D-B36EB47EB13C_zpsdu1hifw4.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/FF342CCD75D447E999DA6361EB54B0FD_zpsgsmd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FF342CCD-75D4-47E9-99DA-6361EB54B0FD_zpsgsmdkkum.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/6A4E7F5C53E14BEEAEE885A91F5FE100_zpsifxu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/6A4E7F5C-53E1-4BEE-AEE8-85A91F5FE100_zpsifxueryu.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/F930CAF33E474972B703AF3C1C32EE1A_zpsl9yd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/F930CAF3-3E47-4972-B703-AF3C1C32EE1A_zpsl9ydav4r.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/035263A237224C71B3F29C27226EC1D6_zpszdcv-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/035263A2-3722-4C71-B3F2-9C27226EC1D6_zpszdcv7dlf.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/019D9861658541A98646E98D8632CF43_zpskpmo-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/019D9861-6585-41A9-8646-E98D8632CF43_zpskpmobmgb.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/84D0B0E6076B4D509417902CA71399E4_zpsx0zd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/84D0B0E6-076B-4D50-9417-902CA71399E4_zpsx0zdgfve.jpg.html)

Kiquee71

03-11-2018, 05:08 PM

I was looking at recovery coolant tanks to finish up the coolant system. Wasn't to happy with what's out there and the prices they are asking for them. So I had some aluminum sheet laying around, ordered some parts and came out spending about half from the ones I was looking at. Will be powdered coated along with all the other crap lol. Plenty of room for the air filter and tube to be tucked behind the drivers headlight.

https://static1.pt-content.com/images/pt/2018/03/3C4F10344F30495CA6C202A7BACD6263_zpszskr-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/3C4F1034-4F30-495C-A6C2-02A7BACD6263_zpszskruivh.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/F2E4DCC7A8B84C59A816E2B3C7291DF0_zpsrw0l-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/F2E4DCC7-A8B8-4C59-A816-E2B3C7291DF0_zpsrw0llpdu.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/DE25D5254BAD411ABA15D75D3EE0FA4C_zpswvmt-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DE25D525-4BAD-411A-BA15-D75D3EE0FA4C_zpswvmtu3kc.jpg.html)

https://static1.pt-content.com/images/pt/2018/03/AF015B5C71444329BB910E247E5DFD9E_zpslkwq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/AF015B5C-7144-4329-BB91-0E247E5DFD9E_zpslkwquvig.jpg.html)

BlackHD

03-12-2018, 09:58 AM

Looks great Kiquee!

Kiquee71

03-12-2018, 10:27 AM

Looks great Kiquee!

Thank you BlackHD. Have you figured out what your plans are going to be for radiator yet?

BlackHD

03-12-2018, 02:50 PM

I picked up the griffin radiator with the tranny cooler. Hopefully it works out. Trying to figure out the wheels and rear end now.

Kiquee71

03-12-2018, 07:52 PM

I picked up the griffin radiator with the tranny cooler. Hopefully it works out. Trying to figure out the wheels and rear end now.

Nice. Wheels were tuff for me also, but eventually you'll figure it out.

Kiquee71

05-06-2018, 01:59 PM

Ok, a little update of the progress slow but getting it done. Been working on the front bumper getting it tucked in all around. I think I've come to a decision on where I'm going with the look of the lights on the bumper, that will come later. I've looked for how to on these bumpers are done, but really got was a lot of before and after photos. Nothing in between on how it was really done so here I'm posting on how I did it and hope it will help someone here too. Here is where I'm at now.

https://static1.pt-content.com/images/pt/2018/05/C54FA7444E834164BEB8E2DE050122BD_zpsynrq-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C54FA744-4E83-4164-BEB8-E2DE050122BD_zpsynrqmkce.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/4FF62CA3B82549AE9BC61A90A0B4A85A_zpsn1c7-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/4FF62CA3-B825-49AE-9BC6-1A90A0B4A85A_zpsn1c7a8wl.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/D7649959F05F4A9881125CF2821C7A28_zpsqdn5-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D7649959-F05F-4A98-8112-5CF2821C7A28_zpsqdn5v0un.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/982CAC723DD849E68AEE5E0C91228AEC_zpsexhz-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/982CAC72-3DD8-49E6-8AEE-5E0C91228AEC_zpsexhzrsav.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/BB1A315DD387460B9FFC911E0F0D907D_zpsha8s-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BB1A315D-D387-460B-9FFC-911E0F0D907D_zpsha8sstk0.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/857D6C173ABE4046815F8063D2AEDD77_zpsjzpn-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/857D6C17-3ABE-4046-815F-8063D2AEDD77_zpsjzpnmbt1.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/D1BD424F326E44739D59052E5C3AE196_zpsmyco-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D1BD424F-326E-4473-9D59-052E5C3AE196_zpsmycoxr6k.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/C22F2B551A1E4DAFAE28364400C55ACE_zpsr8p9-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C22F2B55-1A1E-4DAF-AE28-364400C55ACE_zpsr8p9n87u.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/D0FCCE56719145B5803FF84688514C74_zpsvfia-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D0FCCE56-7191-45B5-803F-F84688514C74_zpsvfiaw0kt.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/D7A3C03D04AD49DBA4B794BC0E283575_zpssrsg-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D7A3C03D-04AD-49DB-A4B7-94BC0E283575_zpssrsgmd2z.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/0F774799A83848E58CF6E9FC15F46DF1_zps20qt-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/0F774799-A838-48E5-8CF6-E9FC15F46DF1_zps20qty1si.jpg.html)

HotRod47

05-07-2018, 03:40 AM

Very nice job on the bumper fitment/mods.

FormTA

05-07-2018, 08:00 AM

Looks great. Nice fitment.

Oregon

05-07-2018, 08:53 AM

Looking good.

It looks like the bumper filler is the main constraint to how much you can tuck the bumper?

Kiquee71

05-07-2018, 03:04 PM

Looking good.

It looks like the bumper filler is the main constraint to how much you can tuck the bumper?

You are correct Oregon, I was able to move it in 1/2" and took some off the bumper edges to line up with the filler. Doesn't sound like much but defiantly looks better than having that big gap.

Z06killinSBF

05-07-2018, 06:27 PM

Looking good man, the bumper is turning out nice!

Rebob

05-08-2018, 03:55 PM

They look so much better when there tucked, it’s the little details like that, that will set yours apart from the others. Nice job !

Kiquee71

05-08-2018, 08:54 PM

Thanks Rebob and everyone for the compliments. Yes the little details is what I look for in cars that I'm looking at even tho it may be not so much a big wow factor, but knowing what it took to make that little detail is well worth it. The finish line is getting closer, ready to hand this over to a shop to finish this baby. lol.

Rebob

05-12-2018, 10:03 AM

Kiquee71

05-13-2018, 12:26 AM

People that now cars will know what it took to do the mods and you’ll feel good about all the effort when you tell them you did it all yourself in your garage. Do you have to run a front plate in Ca ?

Rebob lol I do live in Ca. that pretty much gives you your answer lol. Yes we do need plates here or else I would've of done something different to this bumper.

Kiquee71

05-13-2018, 12:36 AM

Well as I mentioned before about the direction of where I was going with this front bumper. I went with option #2. Finished it up yesterday, but having a late night lol so I'm posting the finish product up now lol. I like the way it turned out. One of the biggest task I have left on my list is finally done. On to the next one on the list. Here is a before & after and in between lol

https://static1.pt-content.com/images/pt/2018/05/A1471EADC0DD48C3A78A69E849FBC629_zps5hmo-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A1471EAD-C0DD-48C3-A78A-69E849FBC629_zps5hmoxgw9.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/74F91DA914B14B919C61582D3D9E99C1_zpsbp9e-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/74F91DA9-14B1-4B91-9C61-582D3D9E99C1_zpsbp9eevhf.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/F7A5E5AA9F1B408DA583C2948B5E9A3D_zpstapv-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/F7A5E5AA-9F1B-408D-A583-C2948B5E9A3D_zpstapvx8x8.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/A7C2404E5DE24FF19344537B80514273_zpseiz5-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A7C2404E-5DE2-4FF1-9344-537B80514273_zpseiz5h28v.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/26C0A92E6B0947229281E2FD3E95E2D0_zps0tfu-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/26C0A92E-6B09-4722-9281-E2FD3E95E2D0_zps0tfurdpt.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/DD2C1BD433814F20BA874D0686C71C0B_zpstthd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/DD2C1BD4-3381-4F20-BA87-4D0686C71C0B_zpstthdfpmy.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/FA1930D12DE14FC4909AC874D8FD12D5_zps5mfh-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FA1930D1-2DE1-4FC4-909A-C874D8FD12D5_zps5mfhcvkg.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/D046D8F3AC594AC3BADB2F63C6254059_zpsjnjs-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/D046D8F3-AC59-4AC3-BADB-2F63C6254059_zpsjnjssaub.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/28A846FD774A41E7A57E446CAA277EFF_zpsiik8-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/28A846FD-774A-41E7-A57E-446CAA277EFF_zpsiik81k5h.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/CBD34EEF165242BFB8BA5C14E0073BFF_zpsvzcr-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/CBD34EEF-1652-42BF-B8BA-5C14E0073BFF_zpsvzcrs2rb.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/FF31B9CA2D554D15B1381720F07AE483_zpsmltp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/FF31B9CA-2D55-4D15-B138-1720F07AE483_zpsmltphcpx.jpg.html)

https://static1.pt-content.com/images/pt/2018/05/BF06A51AA2934203BFDA7207E1BB0E3D_zps4xk4-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/BF06A51A-A293-4203-BFDA-7207E1BB0E3D_zps4xk4mq4f.jpg.html)

Twentyover

05-13-2018, 07:08 AM

Did you need to weld both sides of the light buckets? Looks like there's a small radius/chamfer on the front of the bumper, how did you accomplish that?

Kiquee71

05-13-2018, 12:39 PM

Did you need to weld both sides of the light buckets? Looks like there's a small radius/chamfer on the front of the bumper, how did you accomplish that?

I did not have to weld the back side of the light bucket cause I had enough heat on it to penetrate the other side. You are correct about the radius on the front. The bucket was a little long and I stuck it thru the hole while the bumper was fitted on the car. Then I set it in where it needed to be and traced the outside of the bucket. Removed it from the bumper and cut that section off, removed bumper and tacked it place. Very time consuming lol

Motown 454

05-14-2018, 09:37 AM

Beautiful job on the bumper. The radiator support and cooling system look like a nice setup. The car is looking great.

Timmah

05-15-2018, 06:30 AM

Great Job!!

I like the look. Where did you get the lights from?

Thanks, Tim

Kiquee71

05-15-2018, 09:01 AM

Great Job!!

I like the look. Where did you get the lights from?

Thanks, Tim

Thanks Tim. I bought them from here

https://www.superbrightleds.com/moreinfo/daytime-running-lights/3-and-one-half-inch-led-projector-fog-lights-conversion-kit-w-halo-daytime-running-lights-toyota-nissan/3540/

Kiquee71

06-15-2018, 07:04 PM

Just finished up modifying headlight buckets and taillight housings to hold LED lighting and LED blinkers in the grill. Headlights are from Vintage Car LED glass housing and look stock. It's coming together a little bit at a time making sure everything fits or needs to be fitted lol. Working on oil catch can for engine, trans vent & overflow can, diff vent & overflow can and gas tank vent can. Will post when complete. More check marks on this list, goal to get in a shop by end of year.

https://static1.pt-content.com/images/pt/2018/06/C1E71A044C134AA380A1B261932A38FB_zpskvux-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C1E71A04-4C13-4AA3-80A1-B261932A38FB_zpskvuxlemf.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/C8B50657AE0249868D8BF3348BE9BB0E_zpsapz9-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C8B50657-AE02-4986-8D8B-F3348BE9BB0E_zpsapz97ov9.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/CB310C28D1B346C3B094946070421EE5_zpskugi-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/CB310C28-D1B3-46C3-B094-946070421EE5_zpskugidgh5.jpg.html)

ryanleiker

06-17-2018, 06:16 AM

Where did you get the LED taillight setups from?

Kiquee71

06-17-2018, 08:27 PM

Where did you get the LED taillight setups from?

Ryan, I purchased them through Classic Industries and they are the ones with sequential patterns.

Kiquee71

06-23-2018, 12:18 PM

Here are the finished oil/vent catch cans, they will work. The rest of the parts for my cold air intake had come in, so I'll be starting into that next. Hope these photos will help those who are interested in making their own. Will post soon.

https://static1.pt-content.com/images/pt/2018/06/74A9F8AFFDDE4587ADBB6AA2B0550231_zpsdxu4-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/74A9F8AF-FDDE-4587-ADBB-6AA2B0550231_zpsdxu4qra3.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/8BBB10D1CF7545008C596A3733A428C7_zpsqoax-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8BBB10D1-CF75-4500-8C59-6A3733A428C7_zpsqoaxnd9u.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/3A20A436D72E450DBE811DF007DA60A2_zpsxcl5-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/3A20A436-D72E-450D-BE81-1DF007DA60A2_zpsxcl5mgnc.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/851018EB44714E7AA37F6B3AB641CDFF_zps32ha-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/851018EB-4471-4E7A-A37F-6B3AB641CDFF_zps32hazvso.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/B829910D51ED4A5FB0204001721E0807_zpsbsrl-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B829910D-51ED-4A5F-B020-4001721E0807_zpsbsrlml9e.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/8AB9A47B268945E9A63EB7E41867B17F_zpsp7mw-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/8AB9A47B-2689-45E9-A63E-B7E41867B17F_zpsp7mwcz2h.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/5588D45B59CB48B7919F93097FEA9521_zpsfjp2-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/5588D45B-59CB-48B7-919F-93097FEA9521_zpsfjp2jx1e.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/34C0EA9A7187453A9F1AC7DCD236B7E0_zpswf02-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/34C0EA9A-7187-453A-9F1A-C7DCD236B7E0_zpswf02afbt.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/663ADF3694744078B645615C86868518_zpsuozb-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/663ADF36-9474-4078-B645-615C86868518_zpsuozbh8rh.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/1E73A1F35F1046FDA2662C2D4BEA5387_zpszett-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1E73A1F3-5F10-46FD-A266-2C2D4BEA5387_zpszett1nkj.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/2705CD53A0CD411F80A225119C725FDE_zps4lrd-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/2705CD53-A0CD-411F-80A2-25119C725FDE_zps4lrdwx4d.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/B15979843D0E42808FA8B00A89A1F2A8_zpsq0yc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/B1597984-3D0E-4280-8FA8-B00A89A1F2A8_zpsq0yc6rz3.jpg.html)

Kiquee71

06-24-2018, 05:33 PM

Alright cold air intake tube is finished lol. MAF sensor, vacuum bungs all welded in. Drilled some holes on the front part of inner fender and cut out some sections in the headlight grill to allow some fresh air to the air filter. Wow getting closer to finishing my check list.

https://static1.pt-content.com/images/pt/2018/06/808ECDB40C1D4EEDB48CE304030344F2_zpspie2-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/808ECDB4-0C1D-4EED-B48C-E304030344F2_zpspie2fzfn.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/1EAC7B2E970B4A8F9660A7C1842C41E0_zps5f7n-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/1EAC7B2E-970B-4A8F-9660-A7C1842C41E0_zps5f7nevg7.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/9DE70A1F997E4D88866682C5F2563CEB_zpshhxp-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/9DE70A1F-997E-4D88-8666-82C5F2563CEB_zpshhxpiurn.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/5CCB0CD420C24B2DAB5B570C29CC2717_zpsojth-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/5CCB0CD4-20C2-4B2D-AB5B-570C29CC2717_zpsojth5s1h.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/C156BB4CC23340E3BA4FABC1CF8AEB23_zpsn2uf-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/C156BB4C-C233-40E3-BA4F-ABC1CF8AEB23_zpsn2ufsaxn.jpg.html)

https://static1.pt-content.com/images/pt/2018/06/A4738292332C47A488AE81C178F40B5F_zpssucc-1.jpg (http://s1371.photobucket.com/user/savvykiquee/media/A4738292-332C-47A4-88AE-81C178F40B5F_zpssuccek5c.jpg.html)