Anvil's Biggest Blem Blowout Ever!

[hotwheels]

Anvil Auto is starting off the new year by purging its old inventory of parts including some blems with discounts that will never be seen again! If you are painting part or all of the parts we have for sale, or just have a lighteight race car, this is your chance to aquire some of our lightweight carbon fiber parts for never seen before,unbelievably low prices. We have several 1st gen Camaro header panels that aren't at the right angle (when looking from the rear or front). They can easily be fixed by cutting a verticle line in the back and then gluing back together. We've already made the cut in some, but we just don't have the time to repair them. These start at just $35 each! We also have some 1st gen and 2nd gen Camaro hoods with various blems including weave imperfections in certain areas, gel coat build up in corners and some warped hoods. We've been able to de-warp most warped hoods and we can e-mail you instructions on how to do so. There are also some interior parts like A-pillar moldings and instrument panels where some parts have barely noticable flaws for 15%-20% discount to some that are cracked and have very noticeable flaws for as much as 80% off. The damaged ones could be fixed and painted. We also have some blem spoilers left with similar flaws as the interior parts. Please call us on our toll free number (888) 723-8882 to inquire about what we have left and pricing. Pictures can be sent by request. It doesn't make sense for us to pay to keep these parts in our warehouse, so we are losing money by keeping them month after month. Our loss is your gain! While supplies last!

[1nastyZ06]

I need a first gen cut down rear spoiler if you have one. Just in reg glass.

[Barrrf]

Is it all Camaro stuff? Dibs on chevelle parts if they exist.

[badazz81z28]

I would be interested in a flat hood for a second ge camaro . Please me a price

[raustinss]

Second that on Chevelle stuff...I got a trunk lid from the last blemished sale...

[Sanchez Garage]

left Vm to see if you have any chevelle parts.

[Build-It-Break-It]

Left Voicemail and pm for 1st gen hood, trunk, header panel and cowl panel.

[turner69camaro]

Looking for a header panel, 4" cowl hood, rear spoiler and trunk lid for 69 Camaro and any other parts available. Send pics please

[1970 TT Rustang]

Do you happen to have any 69-70 mustang parts

[redsand]

I need a cowl panel with vent delete

[hotwheels]

I need a first gen cut down rear spoiler if you have one. Just in reg glass.

We have one or two that are carbon, but could be painted for the price of our fiberglass ones ($325)

[hotwheels]

Is it all Camaro stuff? Dibs on chevelle parts if they exist.

We have 1 SS carbon overlay for 70-72 and 1 satin and 1 gloss blank instrument panel for 64-65 Chevelles. All for 25% off.

[hotwheels]

I would be interested in a flat hood for a second ge camaro . Please me a price

PM sent

[1nastyZ06]

Ok. I will take one of the first gen rear spoilers.

[hotwheels]

Looking for a header panel, 4" cowl hood, rear spoiler and trunk lid for 69 Camaro and any other parts available. Send pics please

We have several header panel blems for as little as $35 for paint quality. Sunny you should mention a 4" cowl hood. We should have our first production in the next couple months. Call us if you would like to pr-order. Rear spoiler blems for as little as $99 and deck lids for as little as $350.

[hotwheels]

Do you happen to have any 69-70 mustang parts

Yes, several deck lids, quarter panel extensions and a couple cowl panels as well as one hood scoop that could also be used on any car. Please call for details and availability. Thanks!

[Anthony k]

I sent manal a email about a first Gen Camaro hood. Z28 cowl style.

I already received a header Panel and cowl panel

[dropped72ss]

Any 72 chevelle deck lids?

[hotwheels]

Any 72 chevelle deck lids?

Sorry, no Chevelle deck lids.

[Build-It-Break-It]

I called and left a message for a bunch of Camaro parts but haven't gotten a call back yet....

[hotwheels]

I called and left a message for a bunch of Camaro parts but haven't gotten a call back yet....

Please be patient with us as we have been overwhelmed with calls. We will get back to everyone, it may take the rest of this week to do so. Thank you for your understanding!

[jovozx12]

Any front chin spoilers or radiator close out panels?

[Larry Callahan]

Any Racepak IQ3 dashes for a '68 Camaro?

88639

[Bygblok]

Seems on their site that they're out of stock on every cf 2nd gen camaro part I need......oh well

[hotwheels]

If you see that a part is out of stock on our site, it doesn't account for any blems we have, so we may have blems in the parts you need.
I can say that we don't have any close out panels or race pak panels (sorry Larry, but we do have a non-blem glossy one) and we had one front 1st gen spoiler, but I think it sold. We do have one of our new wrap around front notched '69 spoilers with some slight blemmishes that I would sell for 20% off.
Here's link: http://anvilauto.com/products/camaro-67-69/69-notch-front-spoiler.html

[69-nova]

Do you have a gauge panel for a 69 nova?

[chevelletiger]

Matt,any 71-72 chevelle blems can you pm me a list of parts?thanks.
Phil

[dropped72ss]

Matt,any 71-72 chevelle blems can you pm me a list of parts?thanks.
Phil

I'm interested too thanks

[saltfuture]

Any stuff for a 71 Trans Am?

[hotwheels]

Any stuff for a 71 Trans Am?

We have a 70-73 Formula hood that has a white mark down the center 35% off, a tail panel that is very foggy for 60% off, a rear filler panel with the weave going in the wrong direction for 20% off, a set of T/A fender vents with white spots and some gel build up on the edges for 40% off.

[JeWest]

Do you have any 67 camaro inner fenders??

[67RSSS502]

Next in line for 67 camaro inner fenders if you have them.

[gearheadperformance]

Any 2nd gen Camaro inner fender?

[CROMAN69Z28]

Looking for a list of '69 Camaro interior parts with prices.

[jlo92883]

Anything for a second gen nova?

[saltfuture]

Sent you a PM about that tail panel.

[hotwheels]

Do you have any 67 camaro inner fenders??

No inner fender blems for any cars at this time, sorry.

[hotwheels]

Looking for a list of '69 Camaro interior parts with prices.

We have a few A-pillar moldings with gauge pods left and maybe an istrument panel.

[hotwheels]

Anything for a second gen nova?

We have a couple carbon fiber vent delete cowl panels with some surface scratches on them, 1 fiberglass instrument panel and some B-pillar moldings.

[efs69]

Thanks Matt for the help on the parts. Easy transactions and Manal was awesome!

[bluenova667]

Any 67 nova hoods or trunks?

[hotwheels]

Any 67 nova hoods or trunks?

We have one satin full crbon trunk lid in stock, but it's not a blem. I could still give you 15% off on it since its a slow mover. We don't have any hoods in stock, but if you want to order one, we can make it for you, but it would be full price.

[saltfuture]

Just wanted to say, I got my tail panel, and Anvil really bent over backwards with communication and shipping to basically give away the part. I couldn't be happier.

[badazz81z28]

Did you mention if you have sec gen camaro trunk lids?

[AAQUINO11]

Any rad close outs for 69 camaro? Please PM. Thanks

[GregG69camaro]

do you have a instrument panel for a 69 camaro?

[Aficionado]

Any chance y'all make a hood for a '68-72 Corvette?

[camrat68]

Any 67-68 Camaro lower valance's, rear decks, or notched spoilers to fit a 68 Camaro?

Thanks,
Jim

[hotwheels]

Any 67-68 Camaro lower valance's, rear decks, or notched spoilers to fit a 68 Camaro?

Thanks,
Jim

We do have some deck lids available from 60% off on a warped on to 35% off for one with some minor cosmetic blemishes. We are still working on production of the first notched spoilers for '67/'68, so they should be available in a few months. We rarely have blems of the valances.

[hotwheels]

Just wanted to say, I got my tail panel, and Anvil really bent over backwards with communication and shipping to basically give away the part. I couldn't be happier.

Thanks! Love to hear positive feedback!

[hotwheels]

Did you mention if you have sec gen camaro trunk lids?

Sorry, not at this time.

[hotwheels]

Any rad close outs for 69 camaro? Please PM. Thanks

Not at this time, sorry.

[hotwheels]

do you have a instrument panel for a 69 camaro?

Yes, we have some that have some minor cracks and some with minor cosmetic blemishes we will sell for $299 each, which is the cost of a fiberglass one.

[dropped72ss]

Bump for blemished 72 chevelle parts

[camrat68]

PM sent.
Thanks,
Jim

[Rod]

We do have some deck lids available from 60% off on a warped on to 35% off for one with some minor cosmetic blemishes. We are still working on production of the first notched spoilers for '67/'68, so they should be available in a few months. We rarely have blems of the valances.

Matt...we need to talk parts soon

[hotwheels]

OK, we are getting down to the bottom of the barrel on our blems, but this is your chance to really get some great deals on some parts that you probably won't ever see again. Anybody who has knowledge of working with fiberglass will be able to make use of these parts by fixing little cracks or warping issues. I can walk anybody through it if they need it, but if you are planning on painting any of these parts and want to save weight or have a race car that isn't a show car, this is your chance to get some light weight parts at ridiculous prices; 50%-75% off in most cases. I'm paying to warehouse these parts, so I want to get them off the shelves and into some lucky b@stard's hands! In some cases we have some hoods that have some damage in the corners or front that can be fixed and painted over and there are some that still have nice carbon fiber in the middle so you could expose parts of it if you want to see some carbon fiber as a stripe or accent area. We just don't have the time to work on all these parts ourselves, so our loss, your gain!

[GS455vert]

Hello, I was wondering if you have anything available for a 1970 Nova?
Thanks

[hotwheels]

Any 67 nova hoods or trunks?

We had one deck lid and it sold, sorry!

[hotwheels]

Hello, I was wondering if you have anything available for a 1970 Nova?
Thanks

We have a couple vent-delete cowl panels 25% off, B-pillars 25% off and one fiberglass instrument panel 25% off. None of them oare that bad, so normally we would only discount these between 15%-20%.

[hotwheels]

A lot of people are asking about 1st gen Camaro parts. Here's what we have left:
We have several hoods and a couple deck lids to choose from. Warped ones are going for as much as 75% off and some with weave or surface imperfections or resin buildup are going for 50%-60% off the prices you see on our web site. We also have some header panels that came out of the mold too flat, so we cut a V into the back, bottom edge so they can be flexed into the right position, then the cut can be filled and sanded. These are being blown out for $45 ea. There are also some instrument panels and just a few A-pillars left from 25%-75% off depending on the level of blemishes.
We also have several rear spoilers to choose from including a couple '69 notched spoilers. Spoilers are from 25%-75% off! If you are going to paint the spoiler anyway, here's your chance to get a custom, form fitting rear spoiler without the huge factory gap on the ends for cheap!

[bluenova667]

We had one deck lid and it sold, sorry!

No worries i am the one that bought it...came in just fine....i will be in the market for a hood as soon as my account catches up.

[hotwheels]

Thank you for everyone's patience! We are trying to keep up with everyone's requests. Any Southern California people can feel free to call to set up an appointment to come and see for yourselves what we have and make a deal. We had a gentleman come by today and buy about $1500 in parts and he's thinking of buying more.

[slicknick]

I would like a instrument panel for a 67 Camaro. How much and how do we get deal done

[slicknick]

I would like a instrument panel for a 67 Camaro. How much and how do we get deal done

also would like price on spoiler

[hotwheels]

also would like price on spoiler

Call (888 723-8882) tomorrow for pricing and shipping cost. We only have two instrument panels, but we have several rear spoilers for $299 each.

[coachwinbush]

looking for camaro fenders and inner fenders

[Bull3267]

Any 70 chevelle parts at all? I can pick up in SoCal. Will be getting painted. Thank you,

Hugo

[badazz81z28]

Whats left for sec gen camaro?

[FasstChevys]

Do you have any '68 Camaro instrument panels left?

[hotwheels]

looking for camaro fenders and inner fenders
Sorry, just saw this. Not sure if you are talking about 1st or 2nd gen, but we don't have either in blems, but we do have non-blems for both and 2nd gen inners that I am willing to give some discounts to in order to reduce our inventory. Call us for details.

[hotwheels]

Whats left for sec gen camaro?

Still have hoods (flat and power bulge), fenders and inner fenders, instrument panels, rear spoilers, one RS front spoiler, rear spoiler ends, a filler panel, some satin close out panels, a set of hood vents and some A-Pillars (regular and gauge pods).

[hotwheels]

Do you have any '68 Camaro instrument panels left?

We have one gloss blem left!

[FasstChevys]

We have one gloss blem left!

How much? How noticeable is the blem?

[Bolt-Action]

Probably a "no", but any chance you got any mopar b body stuff?
69 road runner

[badazz81z28]

Still have hoods (flat and power bulge), fenders and inner fenders, instrument panels, rear spoilers, one RS front spoiler, rear spoiler ends, a filler panel, some satin close out panels, a set of hood vents and some A-Pillars (regular and gauge pods).



How much for the rear spoiler ends and condition? I planned to paint anyway.

[Sanchez Garage]

Any chevelle parts left ?

[1970 TT Rustang]

Any 70 mustang parts?

[firefighter5325]

Any blemished 69 gauge clusters?

[latoracing]

Any 70 mustang parts?

+1 if there is anything...

[hotwheels]

Any blemished 69 gauge clusters?

We have a couple carbon fiber ones that would work well if painted. I will let these go for $250 each which is less then our fiberglass ones go for ($299).

[hotwheels]

Any 70 mustang parts?

We have a few deck lids and quarter panel extensions that have surface blems for 50% off, a front bumper with minor surface imperfections for 25% off

[hotwheels]

Any chevelle parts left ?

Which year?

[hotwheels]

How much for the rear spoiler ends and condition? I planned to paint anyway.

Sorry, no more blems of the spoiler ends left. We do have a set that is not a blem.

[hotwheels]

Probably a "no", but any chance you got any mopar b body stuff?
69 road runner

No, sorry, we don't make anything for Mopar yet.

[Bygblok]

would love to see what you have for a 70 Camaro. Website says you're out of everything and I work on a flightline where we don't have liberty to be on a phone much so it's hard to call.

[Sanchez Garage]

71 chevelle

[71maroesteban]

How much for the second gen Camaro front rs piece?

[holschen]

Hi
Looking for GM BULLET SIDE MIRRORS but I´m gonna paint them so I dont need the carbon..
also interested in what mirrors to use with them and if u can make them power mirrors

[hotwheels]

Hi
Looking for GM BULLET SIDE MIRRORS but I´m gonna paint them so I dont need the carbon..
also interested in what mirrors to use with them and if u can make them power mirrors

We don't have any carbon fiber blem mirrors, but we can make some all fiberglass ones for you if you put down a 50% deposit. You can use the guts from an old set of mirrors from a junk yard or ebay or get the repro parts from Classic Industries who also carries the mirror glass. I think there are aftermarket electric mirror kits out there or you can modify some factory unit.

[hotwheels]

Hi
Looking for GM BULLET SIDE MIRRORS but I´m gonna paint them so I dont need the carbon..
also interested in what mirrors to use with them and if u can make them power mirrors

I believe we just got a pair of fiberglass mirror housings in stock.

[qnitro]

any blem or sale plans on 1973 Formula hoods??

[formula350]

78 bird inner fenders?

[hotwheels]

Here is one more 2nd gen hood blem.
This is a satin finish 100% carbon hood that has some weave imperfections and a few minor scratches. We're asking $750, normally goes for $1,950.
105175
105174
105176
105177
105178

[TheParker]

Any '71 Chevelle blems?

[hotwheels]

Any '71 Chevelle blems?

Sorry, no more Cehvelle blems of hoods or trunk lids, but we might have an instrument panel overlay.

[nobreaks254]

any second gen Camaro rear spoilers

[hotwheels]

any second gen Camaro rear spoilers

We have a set of 3 pc. spoiler ends that are blems because of weave imperfections. That's it for spoilers.

[31069ss]

Any blem products for a 69 nova ?

[3_z28camaro]

Any blem 1969 Camaro inner fenders, wide body fenders or inner fender extensions?

Thank you

[hotwheels]

Any blem products for a 69 nova ?

What are you looking for in particular? We might have a hood available.

[hotwheels]

Any blem 1969 Camaro inner fenders, wide body fenders or inner fender extensions?

Thank you

We actually do have one set of inner fenders that are ever so slightly foggy and it's only in certain areas and you can only see it in certain light. They are 100% carbon fiber and normally go for $2550, I will sell this set for $1990/set. We also have a set of wide body fenders that re carbon/fiberglass that have the weave going in the opposite direction from our hoods. These normally go for $2350, your price= $1975/set. We don't have any blem inner fender extensions, but we do have a couple fiberglass ones in stock for $315 or satin finsih carbon/fiberglass for $399 per set.

[nobreaks254]

We have a set of 3 pc. spoiler ends that are blems because of weave imperfections. That's it for spoilers.

how much and can you get a pic?

[31069ss]

What are you looking for in particular? We might have a hood available.


Dash insert .... Is the hood a cowl induction ? Pm me with details

[mklinger]

71 Firebird parts?

[carguy502]

What are you looking for in particular? We might have a hood available.

Which 1969 Nova hood might this be? Would it happen to be in SoCal?

[El Mariachi]

PM'ed!
Possibly looking for a pair of Inner Fenders for a 67 Camaro!

[hotwheels]

Which 1969 Nova hood might this be? Would it happen to be in SoCal?

We should be getting a cowl induction Nova hood blem back, probably in January. We will have it in So. Cal. If you are in the area, we can arrange for you to come take a look at it.

[grendel]

Here is one more 2nd gen hood blem.
This is a satin finish 100% carbon hood that has some weave imperfections and a few minor scratches. We're asking $750, normally goes for $1,950.
105175
105174
105176
105177
105178

Did this sell? If not, I want it.

[grendel]

These too.


We have a set of 3 pc. spoiler ends that are blems because of weave imperfections. That's it for spoilers.

[digdug]

Deck lids How much?

[Build-It-Break-It]

Just wanted to thank Matt and Manal again. I just picked up my carbon fiber wing from them. Top notch product and to notch people. Thanks again

Ahmad B.

[31069ss]

We should be getting a cowl induction Nova hood blem back, probably in January. We will have it in So. Cal. If you are in the area, we can arrange for you to come take a look at it.

Please pm me when you have them in

[slicknick]

Do u guys have any blems of the firewall covers.

[slicknick]

For a 67 camaro

[hotwheels]

Deck lids How much?

I'm assuming you are looking for '69-70 Mustang trunk lids? We have a carbon/fiberglass one that has a cracked corner for $300 and some others with minor blemishes for $450 as well as a couple 100% carbon ones with some small imperfections for @ $900.
106669
106667
106668

[hotwheels]

Do u guys have any blems of the firewall covers.

Sorry, no we don't.

[amargari]

Any chance you have a 70-77 CAMARO Radiator Closeout Panel? I would look to get a blem since I need to modify it to work with the 73 RS support rods and extra support brackets anyway.

-Thanks

[hotwheels]

Any chance you have a 70-77 CAMARO Radiator Closeout Panel? I would look to get a blem since I need to modify it to work with the 73 RS support rods and extra support brackets anyway.

-Thanks

I believe we have one blem left. Call us Monday Morning to order it. It's not bad, so it is 15% off.

[The blur]

Hey Matt this sam.i replied to the email.looking at getting a hood, core support close out panel and deck lid

[Bygblok]

Sure wish the 2nd gen camaro inner fenders were not so pricey. Man I love those things!

[g-machine]

Sure wish the 2nd gen camaro inner fenders were not so pricey. Man I love those things!

I'm going glass to make them more affordable.

[hotwheels]

Hey Matt this sam.i replied to the email.looking at getting a hood, core support close out panel and deck lid

Sam,

We don't have any close out panels, but we have several hood and some deck lid blems we could give you a great deal on. Would yo ube able to come by and look at what we have?

[kabinet]

Hello, Matt. Do you have any cowl panels for a 69 camaro? Either Carbon or Carbon/Fiberglass with wipers.

[hotwheels]

Hello, Matt. Do you have any cowl panels for a 69 camaro? Either Carbon or Carbon/Fiberglass with wipers.

No, sorry, but we do have a wiper delete in stock.

[Ant]

Mustang mirrors?

[68vert]

Hey Matt, Manal,

Over the last several weeks, I've left several voicemails and sent a couple emails regarding a rear deck lid spoiler that is outstanding from my order of four 68 Camaro parts that was placed May 6th 2013. Can you please let me know whats up? Is there better clarity on a real ship date?

[hotwheels]

Hey Matt, Manal,

Over the last several weeks, I've left several voicemails and sent a couple emails regarding a rear deck lid spoiler that is outstanding from my order of four 68 Camaro parts that was placed May 6th 2013. Can you please let me know whats up? Is there better clarity on a real ship date?

We have been waiting for some parts that should be in any day now. We were hoping to get them last week, but we didn't, so I'm thinking we should have them late this week, early next week. Once they are in, we can give you a definitive date to ship. What's your name and e-mail address (we get a lot of calls and e-mails, so I want to make sure I look up the right order)? I'll let you know as soon as we know.

[68vert]

We have been waiting for some parts that should be in any day now. We were hoping to get them last week, but we didn't, so I'm thinking we should have them late this week, early next week. Once they are in, we can give you a definitive date to ship. What's your name and e-mail address (we get a lot of calls and e-mails, so I want to make sure I look up the right order)? I'll let you know as soon as we know.

This is unexpected and pleasant to hear since the last response I received appeared to have an open ended delivery date:

"Again, I'm sorry for the inordinate amount of time to get you a spoiler, it is not ordinary, but was due to an unfortunate turn of events including a move to a new location with a temporary hold on production and a bad batch of parts. We'll let you know when we have a good spoiler as soon as we get it.

Best Regards, Matt"

I will PM you my personal info.

[ddc456]

Is there any blemished hoods? 2nd gen, also looking for a filler panel deck lid and spoiler.
Thanks
Doug

[aronhk_md]

wow....2 years is a bit of a tall order.

[ddc456]

Actually 12/31/14 they updated at the top of this page. Looks as if there is other blem items.

[aronhk_md]

I meant this


Hey Matt, Manal,

Over the last several weeks, I've left several voicemails and sent a couple emails regarding a rear deck lid spoiler that is outstanding from my order of four 68 Camaro parts that was placed May 6th 2013. Can you please let me know whats up? Is there better clarity on a real ship date?

[CamaroDaddy]

Hi Matt, looking for a power bulge hood (Carbon on Fiberglass), rear filler panel, trunk lid and one piece spoiler for a 71 Camaro got do you have any in stock? If not what is the turn around time?

Thanks

[hotwheels]

Hi Matt, looking for a power bulge hood (Carbon on Fiberglass), rear filler panel, trunk lid and one piece spoiler for a 71 Camaro got do you have any in stock? If not what is the turn around time?

Thanks

Daddy,

We currently do not have any of those parts in stock, not even in blems. Call us and place your order so we can make them specifically for you. The turn around time is typically 3 months. With the recent problems at the west coast docks, the lead time has been extended, but from what I hear, they've come to a resolution. We will be moving in about a month, so I've been trying to cut back on lingering inventory (less to move). Once we get settled into our new place, I plan on having our more popular items in stock, but if anyone needs anything as soon as possible, I recommend calling us at 888 723-8882 to get things rolling.
Thanks!

[jamminj007]

What do you have in stock? More specifically I am looking for a hood, trunk lid and rear spoiler?
I was hoping for the front notched spoiler and rear notched spoiler let me know
Jonathan

[hotwheels]

What do you have in stock? More specifically I am looking for a hood, trunk lid and rear spoiler?
I was hoping for the front notched spoiler and rear notched spoiler let me know
Jonathan

We still have some 1st gen cowl hood blems and a couple deck lids and rear spoilers, but no notched spoilers front or rear, sorry!

[jamminj007]

We still have some 1st gen cowl hood blems and a couple deck lids and rear spoilers, but no notched spoilers front or rear, sorry!
Can you pm a price on trunk lid and cowl hood?
thanks Jonathan

[1nastyZ06]

Can you pm me a price on a 69 Camaro rear spoiler? Is it the bolt on style?

[chuckd71]

What do you have for a 71 Chevelle? I already have the hood and trunk and I'm guessing the a pillars are for a hard top?
Would really like some of the side mirrors.

[snappytravis]

We still have some 1st gen cowl hood blems and a couple deck lids and rear spoilers, but no notched spoilers front or rear, sorry!

Do you have a cowl hood 1st gen without the inner structure blem?

[hotwheels]

Do you have a cowl hood 1st gen without the inner structure blem?

We have a couple "Bare" hood blems left. Price is dependent on level of blemmishes. If the blemmishes are not very noticeable, then the discount would only be about 15%-20%, whereas a hood that is only good for paint, the discount would be more like 40%-50%.

[hotwheels]

What do you have for a 71 Chevelle? I already have the hood and trunk and I'm guessing the a pillars are for a hard top?
Would really like some of the side mirrors.

That's right, the A-Pillars are for a hard top. Our GM mirrors will work on a Chevelle or just about any car for that matter. You can re-shape the bottom of the pedestals to conform to the doors.

[indyjps]

Interested in first gen camaro hood, it will be painted, PM sent

[Zapper]

Hey Matt......

Do you have any 2nd Gen 3 piece spoilers in Carbon (for a 70 Camaro)

or

70-73 Camaro UPPER DOOR PANEL TRIM in Carbon

or

Anything for a '70 Camaro

[hotwheels]

Hey Matt......

Do you have any 2nd Gen 3 piece spoilers in Carbon (for a 70 Camaro)

or

70-73 Camaro UPPER DOOR PANEL TRIM in Carbon

or

Anything for a '70 Camaro

We might have a blem pair of 3 pc spoiler ends, no upper door panels, we have some blem and non-blem instrument panels, hood vents, A-pillars with gauge pods. For non-blems we have some hood scoops, center console overlays and shift tunnels.

[Zapper]

Hey Matt....

I'll take the blem pair of spoiler ends


We might have a blem pair of 3 pc spoiler ends, no upper door panels, we have some blem and non-blem instrument panels, hood vents, A-pillars with gauge pods. For non-blems we have some hood scoops, center console overlays and shift tunnels.

[Camaross82]

Any Blem fender braces for first gen Camaro?

[mtuck]

I am looking for a hood for my 67 camaro. Can you send me some pictures of the hood you have available with blems?

Send them to [email protected]

Thank you
Matthew

[VT_Camaro]

Matt,
I have purchased a number of Anvil item for my '68 camaro. I have wheel wells and a number of interior parts. What blem parts do you have available for a '68?

[BBBluey]

Any Blemished 70 Nova pieces?

[badazz81z28]

Any 1970 camaro header or lower valance panels? Standard non RS

[hotwheels]

Matt,
I have purchased a number of Anvil item for my '68 camaro. I have wheel wells and a number of interior parts. What blem parts do you have available for a '68?

We have a couple rear spoilers mostly for paint only, a variety of cowl hoods (tell us what your requirments are and I can tell you what we have that matches, send me an e-mail at [email protected]), some header panels, and some deck lids with cracks in the corners that can be fixed,

[hotwheels]

Any Blemished 70 Nova pieces?

Might have a hood that would require it to be painted on the sides.

[hotwheels]

Any 1970 camaro header or lower valance panels? Standard non RS

Sorry, we don't make those.

[blackhawkip]

Matt,
I am looking for the following parts for a 2nd gen Camaro:
A-pillars (no gauges)
Instrument Bezel (switch delete)
70-73 Front Spoiler
70-73 Door Panel Trim
Door Sill plates with Stainless Inserts

Will you please PM me a quote for all?

Thanks

[cactuss4]

What is the condition of the side mirrors, have something that needs paint? Chevelle.

Tory

[sginphx]

Matt,
I have a 67 Camaro...do you have any new or blem center dash piece and a front valance with lights? Thanks, Shane

[mikeextrafast]

What's the status of 69 camaro close out panels?

[chevelletiger]

That's right, the A-Pillars are for a hard top. Our GM mirrors will work on a Chevelle or just about any car for that matter. You can re-shape the bottom of the pedestals to conform to the doors.
Matt,what blem items do you have for 70-72 chevelles?

[hotwheels]

What is the condition of the side mirrors, have something that needs paint? Chevelle.

Tory

We actually have one set in primered fiberglass in stock if you are interested in just painting them. They are a lot lighter than the stock pot metal ones.

[hotwheels]

Matt,
I have a 67 Camaro...do you have any new or blem center dash piece and a front valance with lights? Thanks, Shane

We don't have any in stock, but you might want to call us to pre-order so you can get in on the next production run.

[hotwheels]

What's the status of 69 camaro close out panels?

Starting production for close-out panels that haven't yet been pre-ordered. We are just finishing some for previous pre-orders.

[chevelletiger]

We actually have one set in primered fiberglass in stock if you are interested in just painting them. They are a lot lighter than the stock pot metal ones.
Mat shoot me a pm on the price of the mirrors
I'l get them if the price is right.
Thank you.

[RLJ676]

Any blem 2nd gen hoods (glass/CF)?

Thanks

[studio57]

i might be interested on 100% carbon 1970 chevelle ss hood and trunk lid.

[MTZ28]

Do you have any 2nd gen camaro deck lids? 1980

[CampbellshotrodsAZ]

Posting so I can follow this thread, as I realized last week after moving the Formula hood off of my 71, that I want a lightweight version now. Hopefully someday there's a blem Formula hood! :)

[Scoobydoo253]

Pm me a price on cf cowl hood w fiberglass inner that retails for 899, front spoiler for 67 that is the carbon and Fiberglass model, cf and also aluminum radiator supports, cf rear spoiler for 67, cf rear deck lid for 67, and hood pin kit please. Thank you

[hotwheels]

i might be interested on 100% carbon 1970 chevelle ss hood and trunk lid.
Sorry, no blend on those now.

[hotwheels]

Do you have any 2nd gen camaro deck lids? 1980

Sorry no blems now.

[hotwheels]

Pm me a price on cf cowl hood w fiberglass inner that retails for 899, front spoiler for 67 that is the carbon and Fiberglass model, cf and also aluminum radiator supports, cf rear spoiler for 67, cf rear deck lid for 67, and hood pin kit please. Thank you

We have some blem hoods and deck kids but price is dependent on if you want to paint all or part of them. We don't have blems on the other parts so I hey would be regular retail uess you were to order over $1000 at one time which would be qualify for a 10% discount.
Anybody in inquiring about specific blems, pease email me at [email protected]
Thanks!

[CampbellshotrodsAZ]

unless you were to order over $1000 at one time which would be qualify for a 10% discount.


What if I buy a Firebird Formula hood that's normally over $1000, does that qualify for the 10% discount? :) (can't hurt to ask!)

[coachwinbush]

carbon fiber inner fenders for 69 camaro pm me if you do