k7king
12-09-2013, 10:11 AM
https://static1.pt-content.com/images/pt/2013/12/18degree_zps0fdc6c76-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/18degree_zps0fdc6c76.jpg.html)
Aluminum Chevrolet Bowtie Block. Stock Bore 4.125
400 CI
18 degree Chevrolet Bowtie Heads with Jesel Rockers HUT 1.1a Flow specs
Roller Solid lifter Cam
Cola Steel crank
Dyers Rods
JE Pistons 9.5:1 compression ratio
Chevrolet Bowtie Intake no Money was spared building this engine.
Engine can be setup for wet or dry sump. Engine is currently a wet sump with a Canton oil pan.
The engine was in a 2nd Gen Camaro and I built a custom set of headers that will go with it.
This engine was rebuilt Last winter to lower the compression for pump gas. I have the other pistons to make 15:1 that go with it.
The engine is complete just needs a Carb.
$8000 Firm must pickup.
[email protected]
Seymour Indiana
https://static1.pt-content.com/images/pt/2013/12/1211131116_zpsfd62a9e1-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/1211131116_zpsfd62a9e1.jpg.html)
https://static1.pt-content.com/images/pt/2013/12/1211131113_zpsf323a0f5-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/1211131113_zpsf323a0f5.jpg.html)
https://static1.pt-content.com/images/pt/2013/12/photo1_zps8f5a947c-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/photo1_zps8f5a947c.jpg.html)
https://static1.pt-content.com/images/pt/2013/12/SandCreek2012081400317_zps2a25e3c3-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/SandCreek-20120814-00317_zps2a25e3c3.jpg.html)
Aluminum Chevrolet Bowtie Block. Stock Bore 4.125
400 CI
18 degree Chevrolet Bowtie Heads with Jesel Rockers HUT 1.1a Flow specs
Roller Solid lifter Cam
Cola Steel crank
Dyers Rods
JE Pistons 9.5:1 compression ratio
Chevrolet Bowtie Intake no Money was spared building this engine.
Engine can be setup for wet or dry sump. Engine is currently a wet sump with a Canton oil pan.
The engine was in a 2nd Gen Camaro and I built a custom set of headers that will go with it.
This engine was rebuilt Last winter to lower the compression for pump gas. I have the other pistons to make 15:1 that go with it.
The engine is complete just needs a Carb.
$8000 Firm must pickup.
[email protected]
Seymour Indiana
https://static1.pt-content.com/images/pt/2013/12/1211131116_zpsfd62a9e1-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/1211131116_zpsfd62a9e1.jpg.html)
https://static1.pt-content.com/images/pt/2013/12/1211131113_zpsf323a0f5-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/1211131113_zpsf323a0f5.jpg.html)
https://static1.pt-content.com/images/pt/2013/12/photo1_zps8f5a947c-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/photo1_zps8f5a947c.jpg.html)
https://static1.pt-content.com/images/pt/2013/12/SandCreek2012081400317_zps2a25e3c3-1.jpg (http://s295.photobucket.com/user/k7king/media/18%20Degree%20Engine/SandCreek-20120814-00317_zps2a25e3c3.jpg.html)