WTB C5 Conversion Hubs (Machined drum hubs)

[Ryanater]

Looking for a set of drum hubs that have been machined to accept C5/LS1/CTS-V disc brakes.
Doing a disc upgrade on my 69 Camaro

[Tom Welch]

Get your hubs turned down in a lathe, available at most any machine shop and repair shop that does brakes, we've don this mod 4 times and it is a very straightforward and simple process. Measure the inside diameter of the rotor and turn the hub to fit, too easy.

[Ryanater]

Thanks. I would but I'm running disc brake spindles so I don't have drum brake hubs. I just figured that I would see if anyone had a set of rebuilt or new hubs that were already machined since I have to buy some anyway.

[Typhoon1015]

I bought a set from ebay last year and then turned them down on a brake lathe.

[chevelletiger]

i have an extra pair of drum hubs kicking around,shoot me an offer.what state are you in?phil

[130fe]

I have an extra set also, you can have them just have to pay for shipping. Did you get the steering arms?

[Ryanater]

Got the steering arms. Thanks again.

Sure just let me know how much shipping is.