Need to borrow some wheel spacers

[cwylie]

I am trying to roll my fenders using an eastwood fender roller but my axle is too narrow now. Guess I should have done while the stock axle was still in the car. Would anyone be willing to rent/loan me a 1 inch or larger wheel spacer for a 5x4.75 bolt pattern. I only need it for a day or two and hate to buy a pair I dont even need.

[67rally]

Worst case scenario, I have seen them for under $40/pr shipped on ebay.

[astroracer]

Got enough lug stud length to just stack some washers on the studs? It's not like you'll be driving it like that... Right? :)

[cwylie]

I ended up getting it figured out, I used the panhard bar to push the rear axle over about an inch each way to give me enough room. Dang these fenders are hard to roll compared to newer cars.