1969 Pro Touring Camaro

[Gwinner]

Hey Everyone. Up for sale is my 69 Chevy Camaro Pro Touring build. There's a lot to list but here's a short run down of whats on the car. All the work was done by Dick and his crew at Best of Show Coach works in Escondido California (bestofshowcoachworks.com). They do great work and I highly recommend them if you live in So Cal. I have all the paperwork and receipts for the work that was done start to finish. We started from the ground up on this car last year with the chassis, suspension, brakes etc. The motor has 3,520 miles on it as it sits now. The only major parts of the car that were not restored since I've owned it are the paint and the interior, both are still in very good shape though. The car is a blast to drive, I'm very sad to let her go but I've recently purchased a new porsche for daily driving and just do not have the money or space to keep both unfortunately. If interested, email me with a phone number ([email protected]) and I'll get back to you right away. I have more photos as well if interested, thanks! Asking $48k

Parts list-

- 502 Big Block
. Edlebrock Heads and Intake
. Edlebrock Carb
. Chevrolet Hydralic Roller Cam
. Ceramic coated headers

- Turbo 350 transmission

- Detroit Speed Hydroformed Subframe, Powder-coated Black

http://www.detroitspeed.com/1967-1969-F-Body-products/032001-hydroformed-subframe.html

The subframe comes complete with the following components as a package from Detroit Speed:
• Hydroformed Framerails
• Stamped Crossmembers
• DSE Tubular Upper and Lower Control Arms
• DSE/JRi Coilover Adjustable Shocks
• Power Rack and Pinion Steering
• Splined Anti-Roll Bar
• C6 Steering Knuckles and Bearing Packs

-Detroit Speed Quadralink Rear Suspension With Adjustable Shocks

-Detroit Speed Mini Tubs Painted black And Undercoated

- Detroit Speed Subframe Connecters

- Forgeline ZX3R Wheels in Satin Black, custom made to fit this car, 18x9 Front 18x11 Rear

- Wilwood brakes with slotted rotors, 13" rotors front, 11" rear

- Michelin Pilot Sport 2 Tires

- Rick's Stainless Fuel Tank With Stainless Fuel Lines

- Currie 9 Inch Rear End, narrowed to fit the mini tubs and super wide rear tires

- Magnaflow X-Pipe Custom Exhaust

- Ron Davis Dual Fan Aluminum Radiator. All new hoses and lines.

- VintageAC Heater and Defroster. Also prepped for AC unit

- Car will also come with JBL door speakers and rear 10in speakers. Still new in the box.

[Gwinner]

Updated Photos

[parsonsj]

Price?

[Gwinner]

Asking $55k

[Gwinner]

Bump!

[scotzilla]

whats the paint code or color. How hard would it be to undo that dash?

[Gwinner]

The Paint is hugger orange. There's 3 small chips on the whole car, one about the size of your pinky fingernail and the others less than half that. The previous owner had put in the dash that you see and kept it minimal for weight savings I was told. There's not much to it so the removal and installation of a new one would be pretty simple. Since I bought the car, we've replaced almost the entire chassis. The only things that weren't touched since I've owned it are the paint and interior. Both are in great shape but if you wanted to gut the interior, there's a solid foundation and it wouldn't take much to make it your own.

[Fkav]

Any flexibility on pricing or interest in trades?

[Gwinner]

Not interested in trades as I don't have any more room in my garage but I'd be willing to move on the price a little. PM sent

[4MuscleMachines]

Are the stock mounting points for the dash and front inner fenders/wells still there? Is that a DSE roll bar? Also can you expand on the statement "we've replaced almost the entire chassis"?

Thanks.

[Gwinner]

I don't know on the dash mounts as the previous owner installed the current dash and I'm not sure what it's connected to on the backside. The inner fender well mounts are still there. The roll bar is not DSE, it is welded in though. If you read the parts list above you will see what I meant about the chassis. Complete DSE front subframe, here's the link so you can see it on the DSE website, the kit installed has the single adjustable shocks and powder coated black option, retails for $7,900 - (http://www.detroitspeed.com/1967-1969-F-Body-products/032001-hydroformed-subframe.html) DSE subframe connectors, all DSE suspension front and rear, Currie rear end etc.. Basically stripped everything off the bottom of the car, undercoated the bottom of the body and put everything new that's listed back on it. Thanks!

[Gwinner]

Price drop 48K.

[ff5013]

I like this car good luck with the sale.

[Gwinner]

Thanks! Wish I had the extra space and money to keep it but that's just not the case. Hopefully it'll find a great home.

[Gemelli]

Hi, I would like to talk about purchasing your car. please contact me at [email protected] or on my cell at 416-677-5049.

thanks,

Domenic

[Gemelli]

is the car still for sale?

[classiccarcustoms]

99% sure it was sold.

[Steve N 69 69 69]

It sold, Its in the project updates section. Nice ride.